Influence of the isothermal cure temperature on the nanostructure and thermal properties of an epoxy layered silicate nanocomposite
Visualitza/Obre
23540_fta.pdf (823,7Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/19526
Tipus de documentArticle
Data publicació2013-03-08
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The cure kinetics of triglycidyl p-amino phenol (TGAP) epoxy resin with a diamine (4,4-diamino diphenyl sulphone [DDS]), reinforced with montmorillonite (MMT), has been studied by differential scanning calorimetry. The isothermal cure reaction consists of two parts: a rapid intra-gallery reaction, attributed to homopolymerization of the TGAP catalyzed by the MMT and the extra-gallery cross-linking reaction of the TGAP with the DDS. Increasing cure temperature promotes the intra-gallery reaction, which should promote an exfoliated nanostructure; this is confirmed by transmission electron microscopy. These results indicate that this system (TGAP/DDS/MMT) is an excellent candidate for achieving exfoliated polymer-layered silicate nanocomposites and identifies a protocol for optimizing the degree of exfoliation.
CitacióShiravand, F.; Hutchinson, J.M.; Calventus, Y. Influence of the isothermal cure temperature on the nanostructure and thermal properties of an epoxy layered silicate nanocomposite. "Polymer engineering and science", 08 Març 2013, p. 1-8.
ISSN0032-3888
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
23540_fta.pdf | 823,7Kb | Accés restringit |