Custom formulation of red ceramics with clay, sewage sludge and forest waste
Visualitza/Obre
102_devant.pdf (707,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/18987
Tipus de documentArticle
Data publicació2011-10
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The large quantities of sewage sludge that are currently generated require new alternatives for its recycling and final destination, beyond already known methods in the agriculture and cement industry. The use of this sludge as raw material for the production of structural ceramics, such as clay bricks, may become an interesting alternative, both from an industrial and environmental point of view.
Several investigations have addressed this issue by formulating binary mixtures of sludge with clay. However, the incorporation of forest waste into the binary mixture described in this paper allows a high amount of sewage sludge to be assimilated into an extrudable mix and represents a better choice for the valorization of this hazardous waste.
In this study the physicochemical properties of several formulations of ternary mixtures were analyzed. A ternary pseudo diagram was obtained relating the physicochemical properties of the ceramic product to the fraction of the raw materials. The optimal ternary mixture of 10% sludge, 10% forest waste and 80% clay, yielded a ceramic material with compression strength of 96 kp/cm2. It also met the technological limit of 8 bar to give and extrudable material. The mixture would be suitable for building ceramics, with low thermal conductivity (0.31 W/m·K) and high porosity (59.4%).
The environmental aspects of the production of these ceramics were investigated by leaching and outgassing tests.
CitacióDevant, M.; Cusido, J.; Soriano, C. Custom formulation of red ceramics with clay, sewage sludge and forest waste. "Applied clay science", Octubre 2011, vol. 53, núm. 4, p. 669-675.
ISSN0169-1317
Versió de l'editorhttp://www.sciencedirect.com/
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
102_devant.pdf | 707,9Kb | Accés restringit |