Modular simulation of vapour compression systems with an object oriented tool
Visualitza/Obre
Modular Simulation of Vapour Compression Systems With an Object Oriented Tool_2377.pdf (479,0Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/18866
Tipus de documentText en actes de congrés
Data publicació2013
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The objective of this work is to simulate vapour compression refrigeration systems through a modular approach by means of an object - oriented numerical tool called NEST. For this purpose, the global system is modeled
as a collection of different elements which are linked between them.
Each element represents a specific part of the system (e.g. heat exchanger,
compressor, expansion device, tube, cavity, wall, etc.) and can be independently solved for given boundary conditions. The global resolution procedure is carried out by solving all the elements iteratively, transferring information between them, until a converged solution is reached.
The system is easily modified by adding, subtracting or substituting any of
its elements. This feature gives great flexibility to the model, not only
because the configuration of the system can be clearly altered, but also because the numerical model of any element can be easily replaced allowing different levels of simulation. In this work the object - oriented methodology together with the elements description and their resolution procedures are presented. The model is validated against experimental data obtained from a refrigeration cycle working with isobutane. In addition to this, an illustrative case is presented in order to show the system capabilities.
CitacióAblanque, N. [et al.]. Modular simulation of vapour compression systems with an object oriented tool. A: International Referigeration and Air Conditioning. "2012 Compressor/Refrigeration & Air Conditioning/ High Performance Buildings Conferences at Purdue". Purdue: 2013, p. 2377, 1-2377, 8.
Versió de l'editorhttp://cataleg.upc.edu/record=b1420728~S1*cat
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Modular Simulat ... ect Oriented Tool_2377.pdf | 479,0Kb | Accés restringit |