Multivariable model predictive control of water levels on a laboratory canal
Visualitza/Obre
MULTIVARIABLE MODEL PREDICTIVE CONTROL OF WATER LEVELS ON A LABORATORY CANAL_horvath.pdf (454,4Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Tipus de documentText en actes de congrés
Data publicació2012
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Automatic control of irrigation canals can reduce the loss of water in considerable amounts, therefore it is generating ecologic and economic benefits. There have been many different types of automatic controllers developed, but only few of them had the opportunity of being tested on the field due to the long delay time and the inconveniences of interrupting the operation of the irrigation. Therefore, the automatic controllers developed for large irrigation canals should be tested before by means of numerical simulations and/or laboratory experiments.
The Technical University of Catalonia possesses a laboratory irrigation canal with the length of 220m, with 3 motorized gates, and 11 level sensors that are connected to a SCADA system. This facility makes it possible to test controllers of any type, since all the instrumentation and real time operation runs within a flexible working environment running in Matlab-Simulink . The canal can be configured from one pool to three pools, which allows the development of multivariable control.
A numerical model of the canal has been developed using the 1D hydrodynamic model SIC. With the help of this software it is possible to simulate the hydraulics of the canal and, due to the link between SIC and Matlab, also to test any controller developed previously in the Matlab environment.
In this work a centralized multivariable model predictive controller for water levels is developed and validated by means of numerical simulation.
CitacióHorväth, K. [et al.]. Multivariable model predictive control of water levels on a laboratory canal. A: New trends in simulation, Hydroinformatics & 3D modelling. "Proceedings of the SIMHYDRO 2012". Sophia-Antipolis: 2012, p. 1-12.
ISBN978-2-906831-91-9
Col·leccions
- CoDAlab - Control, Dades i Intel·ligència Artificial - Ponències/Comunicacions de congressos [189]
- Departament de Matemàtiques - Ponències/Comunicacions de congressos [1.077]
- FLUMEN - Dinàmica Fluvial i Enginyeria Hidrològica - Ponències/Comunicacions de congressos [91]
- Departament d'Enginyeria Hidràulica, Marítima i Ambiental (fins octubre 2015) - Ponències/Comunicacions de congressos [118]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MULTIVARIABLE M ... BORATORY CANAL_horvath.pdf | 454,4Kb | Accés restringit |