A 1-D Thermo-Hydro-Mechanical model of the middle section of canister retrieval test
Visualitza/Obre
11670399.pdf (414,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/18302
Tipus de documentText en actes de congrés
Data publicació2009
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this papera 1-D model simulation of the middle section of Canister Retrieval Test, conducted at the Áspo Hard Rock Laboratory, is presented. The model considers the MX-80 bentonite block, the bentonite-rock interface filled with pellets and the gap between canister and bentonite. The thermo-hydro-mechanical simulation of the model was performed using the Code-Bright finite element program. For the simulation of the opening-closure of the gap a joint element with non-linear elastic mechanical law was implemented in the code. The formulation
of this element also incorporates the thermal and hydraulically laws existing in the code. The results from the numerical analysis are compared with the instrumentation data obtained during the test. Also, the final state of bentonite and pellets is compared with data measured after the test dismantling. From these comparísons it is concluded that the model can satisfactorily reproduce the observed behaviour ofthe materials in the test.
CitacióZandarín, M.T. [et al.]. A 1-D Thermo-Hydro-Mechanical model of the middle section of canister retrieval test. A: TIMODAZ-THERESA lnternational Conference. "Proceedings of the European Comission TIMODAZ-THERESA lnternational Conference, Luxembourg, 29 September-1 October 2009: Impact of Thermo-Hydro-Mechanical Chemical (THMC) Processes on the Safety of Underground Radioactive Waste Repositories". Luxemburg: 2009, p. 317-321.
ISBN978-92-79-26057-5
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
11670399.pdf | 414,8Kb | Accés restringit |