Evolution of roughness parameters along polishing tests of previously ground surfaces
Visualitza/Obre
TMT12-Buj.pdf (101,0Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/17763
Tipus de documentComunicació de congrés
Data publicació2012
Condicions d'accésAccés restringit per decisió de l'autor
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In polishing tests, precise determination of polishing time needed is difficult, since representation of
surface roughness against polishing time leads to an asymptotic curve. In the present work, results of
the polishing tests of previously ground surfaces are presented. Different roughness parameters were
considered. Grinding wheels of 100 and 150 Norton grain size respectively were used. Cutting speed
was 25 m s-1 and depth of cut was 0.02 mm. Two different feeds were considered: 9 m min-1 and 15 m
min-1. A polishing test was performed by means of corundum polishing pads of grain size 2500.
Results show that, the higher the initial grain size of the grinding wheel, the higher initial roughness is
as expected. Amplitude roughness parameters such as Ra and Rq decrease with polishing time.
Regarding material percentage parameters, Rk and Rpk decrease more sharply than amplitude
roughness parameters in the first 20 s of the polishing test, and afterwards decrease slightly. Rvk
decreases more slowly than amplitude roughness parameters along the polishing test.
Keywords: grinding, polishing, roughness parameters
CitacióBuj, I.; Vivancos, J. Evolution of roughness parameters along polishing tests of previously ground surfaces. A: International Reseach/Expert Conference. "16th International Research / Expert Conference". Dubai: 2012, p. 35-38.
ISBN1840-4944
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TMT12-Buj.pdf | 101,0Kb | Accés restringit |