Study of the friction, adhesion and mechanical properties of single crystals, ceramics and ceramic coatings by AFM
Visualitza/Obre
study.pdf (946,3Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.jeurceramsoc.2010.10.023
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/17491
Tipus de documentArticle
Data publicació2011-04-06
EditorElsevier
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper reviews commonly used methods of analyzing and interpreting friction, adhesion and nanoindentation with an AFM tip test data, with a particular emphasis of the testing of single crystals, metals, ceramics and ceramic coatings. Experimental results are reported on the friction, mechanical and adhesion properties of these materials.
The popularity of AFM testing is evidenced by the large quantity of papers that report such measurements in the last decade. Unfortunately, a lot of information about these topics is scare in the literature. The present paper is aimed to present the basic physical modelling employed and also some examples using each technique.
CitacióRoa, J. [et al.]. Study of the friction, adhesion and mechanical properties of single crystals, ceramics and ceramic coatings by AFM. "Journal of the european ceramic society", 06 Abril 2011, vol. 31, núm. 4, p. 429-449.
ISSN0955-2219
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S095522191000484X#
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
study.pdf | 946,3Kb | Accés restringit |