AFM as an alternative for Young's modulus determination in ceramic materials at elastic deformation regime
Visualitza/Obre
AFM.pdf (753,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.physc.2011.05.249
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/17330
Tipus de documentArticle
Data publicació2011-09-08
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A novel alternative to the conventional nanoindentation technique for hard materials is presented. An atomic force microscopy probe is used as an indenter, applying loads in the nN range and producing elastic deformations of a few nanometres. This new technique allows a reduction of the different inherent nanoindenter problems. This result in an increase in the quality of the overall results, and thus provide better understanding of the contact mechanism between the indenter and the sample, yielding Young’s modulus values consistent with the literature. This is confirmed by a series of experiments performed on different YBa2Cu3O7−x textured and single crystal samples textured using different techniques.
Descripció
An atomic force microscopy probe is used as an indenter, applying loads in the nN range and producing elastic deformations. This result in an increase in the quality of the overall results, and thus provide better understanding of the contact mechanism between the indenter and the sample, yielding Young’s modulus values consistent with the literature.
CitacióRoa, J. [et al.]. AFM as an alternative for Young's modulus determination in ceramic materials at elastic deformation regime. "Physica C. Superconductivity and its applications", 08 Setembre 2011, vol. 471, núm. 17-18, p. 544-548.
ISSN0921-4534
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
AFM.pdf | 753,6Kb | Accés restringit |