DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Altres >
Enviament des de DRAC >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/16493

Ítem no disponible en accés obert per política de l'editorial

Arxiu Descripció MidaFormat
risk.pdf500,04 kBAdobe PDF Accés restringit

Citació: Medina, H. [et al.]. Risk-based optimization of the design of on-shore pipeline shutdown systems. "Journal of loss prevention in the process industries", Maig 2012, vol. 25, núm. 3, p. 489-493.
Títol: Risk-based optimization of the design of on-shore pipeline shutdown systems
Autor: Medina, Héctor; Arnaldos Viger, Josep Veure Producció científica UPC; Casal Fàbrega, Joaquim Veure Producció científica UPC; Bonvicini, Sarah; Cozzani, Valerio
Data: mai-2012
Tipus de document: Article
Resum: Crude oil and other liquid materials are transported in large quantities through pipelines. Pipelines are an efficient and safe transport way as compared to both rail and road transportation, both from the economical and environmental points of view. Nevertheless, loss of containment accidents can occur due to external action ea mechanical impact, for examplee or to corrosion, aging, etc. Even though the frequency of such events is certainly very low, the effects and consequences on environment can be very important. The consequences of accidents in pipelines can be efficiently reduced through a suitable design of the whole system. One of the points which must be decided in the design is the installation of blocking valves at appropriate distances, so that emergency shutdowns can interrupt the flow of substance and isolate the section where the loss of containment has taken place. In the case of pipe rupture the amount released is therefore limited to the content between two consecutive valves, usually placed according to heuristic criteria. However, if too many valves are used, the capital cost of equipment increases excessively, and if too few are used, the risk of serious accidents increases. In this paper we consider the possibility of improving the design of such systems by applying riskbased optimization criteria. We propose an optimization methodology to solve this conflict by means of an objective function that analyzes the variations in overall costs, including the cost of the investment (with specific reference to blocking valves) and the cost of accidents. The result is an optimum situation in which costs are kept to a minimum. As an example, we apply the methodology to the transportation of gasoline by pipeline.
ISSN: 0950-4230
URI: http://hdl.handle.net/2117/16493
DOI: 10.1016/j.jlp.2011.12.005
Versió de l'editor: http://www.sciencedirect.com/science/article/pii/S0950423011002130#
Apareix a les col·leccions:Altres. Enviament des de DRAC
CERTEC - Centre d´Estudis del Risc Tecnològic. Articles de revista
Departament d'Enginyeria Química. Articles de revista
Comparteix:


Stats Mostra les estadístiques d'aquest ítem

SFX Query

Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons Llicència Creative Commons
Creative Commons

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius