Experimental study of damping in civil engineering structures using smart materials (CuAlBe - SMA): an application to a steel portico
Visualitza/Obre
ICOME_11_Torra_1CuAlBe_SMA.pdf (3,334Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/16437
Tipus de documentArticle
Data publicació2010
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The target of the paper focuses in the required properties for successful behavior of the CuAlBe Shape Memory Alloy (SMA) in damping of steel structures under the action of earthquakes. The appropriate fracture – life, the long time of aging, the minor creep effects on cycling, the Clausius-Clapeyron equation and the self-heating effects are also, evaluated. Analysis via simulation using a proprietary model of the SMA behavior furnishes satisfactory results. Our main interest is focused in the experimental results produced by tests in one loaded steel portico (beam: HEB-120 of 4.10 m, pillars: HEB-100 of 2.47 m) free and with SMA dampers in the diagonals. The dampers are built with two trained wires of CuAlBe or two wires of NiTi. The experimental results without and with the dampers are, mainly analyzed using one excitation induced by a hydraulic device at 1 Hz. The portico is mounted over a chariot with wheels protected by supplementary reinforced walls to avoid “out-of-plane” oscillations.
CitacióTorra, V. [et al.]. Experimental study of damping in civil engineering structures using smart materials (CuAlBe - SMA): an application to a steel portico. "International review of mechanical engineering", 2010, vol. 4, núm. 5, p. 586-593.
ISSN1970-8734
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ICOME_11_Torra_1CuAlBe_SMA.pdf | 3,334Mb | Accés restringit |