Analysis of chatter marks damage on the Yankee dryer surface of a tissue machine
Visualitza/Obre
Article principal (2,499Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.engfailanal.2012.02.003
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/16356
Tipus de documentArticle
Data publicació2012-03-08
EditorElsevier
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A tissue machine suffering from Yankee chatter marks has been experimentally investigated. A series of vibration measurements during normal operation at various Yankee speeds on both the creping and the cleaning blade holders have been carried out. The analysis in a frequency range up to 20 kHz has permitted to identify speed dependent frequency peaks and broadband high frequency vibration content on the creping zone. Hence, an experimental modal analysis of the creping blade and holder has been carried out with the machine stopped to identify its natural frequencies. As a result, resonance conditions have been identified due to the gearbox excitation originated by the meshing process. The study of the corresponding mode shapes has permitted to understand the vibration behavior and its relationship with the damage. To solve the problem, the creping blade holder structure has been redesigned to detune the resonances. Since this overhaul, comparable measurements have confirmed a significant reduction of vibrations and high frequency noise. The appearance of chatter marks has been minimized.
CitacióEscaler, X.; Torre, O.; Egusquiza, E. Analysis of chatter marks damage on the Yankee dryer surface of a tissue machine. "Engineering failure analysis", 08 Març 2012, vol. 23, p. 44-54.
ISSN1350-6307
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
EFA_1715_Escaler.pdf | Article principal | 2,499Mb | Accés restringit |