DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Altres >
Enviament des de DRAC >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/16317

Ítem no disponible en accés obert per política de l'editorial

Arxiu Descripció MidaFormat
residual vibration.pdf1,16 MBAdobe PDF Accés restringit

Citació: Veciana, J. M.; Cardona, S. Residual vibration reduction in mechanical systems: a time-domain approach. "International Journal of Precision Engineering and Manufacturing", Agost 2012, vol. 13, núm. 8, p. 1327-1339.
Títol: Residual vibration reduction in mechanical systems: a time-domain approach
Autor: Veciana Fontanet, Joaquim Maria Veure Producció científica UPC; Cardona Foix, Salvador Veure Producció científica UPC
Editorial: Springer
Data: ago-2012
Tipus de document: Article
Resum: This paper presents a time-domain technique to generate command inputs for the reduction of residual vibrations in mechanical systems. The technique is based on the generation of motion profiles with zero-crossing points in their frequency spectra at the system resonances in the same way as the zero-vibration (ZV) command generation methods. By including an appropriate negative exponential time function, which contains the system natural frequency and the damping ratio, the resultant input can be applied to damped systems with a result of zero residual vibration. The signals synthesized can be used as a generic physical magnitude in vibratory systems. However, they were particularized for mechanical systems and engineering metrics were used. Compared to other ZV methods, for a short duration input range, the signals obtained have better performance in terms of minimum-acceleration-switch shape which is translated to a smoother motion profile. The development includes the application to single-mode and multiple-mode mechanical systems and the possibility of handling two functional requirements or constraints in the desired application. The analyzed systems are those that can be modeled as discrete linear ones with several vibratory degrees of freedom and can be described with constant parameter motion equations. Experimental results show the efficacy of the method developed with its application to a damped pendulum test platform.
ISSN: 2234-7593
URI: http://hdl.handle.net/2117/16317
DOI: 10.1007/s12541-012-0176-2
Versió de l'editor: http://www.springerlink.com/content/g204728p12w82315/
Apareix a les col·leccions:Altres. Enviament des de DRAC
GREVTAM - Grup de Recerca en Vibracions i Teoria i Anàlisis de Màquines. Articles de revista
Departament d'Enginyeria mecànica. Articles de revista
Comparteix:


Stats Mostra les estadístiques d'aquest ítem

SFX Query

Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons Llicència Creative Commons
Creative Commons

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius