DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Altres >
Enviament des de DRAC >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/16185

Ítem no disponible en accés obert per política de l'editorial

Arxiu Descripció MidaFormat
MSF.706-709.2393[1].pdf7.63 MBAdobe PDF Accés restringit

Citació: Calvo, J.; Cabrera, J.; Shu, S. Characterization of precipitation kinetics of Inconel 718 superalloy by the stress relaxation technique. "Materials science forum", 2012, vol. 706-709, p. 2393-2399.
Títol: Characterization of precipitation kinetics of Inconel 718 superalloy by the stress relaxation technique
Autor: Calvo Muñoz, Jessica Veure Producció científica UPC; Cabrera Marrero, José M. Veure Producció científica UPC; Shu, Sheyu
Data: 2012
Tipus de document: Article
Resum: Inconel 718 is a nickel-chromium-iron superalloy which presents excellent mechanical properties at high temperatures, as well as good corrosion resistance and weldability. These characteristics can be optimized with an appropriate control of microstructural features such as grain size and precipitation. Precipitates of different nature can form in these alloys, i.e. γ’’ (a metastable metallic compound Ni3Nb), γ’ (Ni3(Ti, Al), carbides and/or δ phase (intermetallic Ni3Nb). Aging treatments are usually designed to obtain the precipitation required in order to optimize mechanical properties. However, precipitation can also appear induced by deformation and therefore interfere with hot forming operations, such as forging. Under these conditions, precipitation may lead to an increase of the loads required to carry out the process. The aim of the work was the characterization of precipitation kinetics for Inconel 718. With this purpose, stress relaxation tests were carried out at temperatures ranging from 950°C to 800°C. Moreover, different amounts of deformation were applied to the samples, prior to stress relaxation, to evaluate the effect of this variable on inducing precipitation. Some samples were quenched at different relaxation times for metallographic evaluation. The results obtained through mechanical testing, together with a proper characterization of precipitation by Scanning Electron Microscopy, were the basis for obtaining precipitation-timetemperature (PTT) diagrams after different deformation conditions.
ISSN: 0255-5476
URI: http://hdl.handle.net/2117/16185
DOI: 10.4028/www.scientific.net/MSF.706-709.2393
Versió de l'editor: http://upcommons.upc.edu/e-prints/retrieve/84937/MSF.706-709.2393%5B1%5D.pdf
Apareix a les col·leccions:Altres. Enviament des de DRAC
PROCOMAME - Processos de Conformació de Materials Metàl·lics. Articles de revista
Departament de Ciència dels Materials i Enginyeria Metal·lúrgica. Articles de revista
Comparteix:


Stats Mostra les estadístiques d'aquest ítem

SFX Query

Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons Llicència Creative Commons
Creative Commons

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius