A methodology for building a fault diagnoser for hybrid systems
Visualitza/Obre
paper-38.pdf (161,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/14998
Tipus de documentText en actes de congrés
Data publicació2011
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this paper, a design methodology for building diagnosers for hybrid systems
is proposed. The design methodology uses as a starting point a hybrid automaton model to
represent the hybrid system behaviour by means of the interaction of continuous dynamics and discrete events. Then, a hybrid fault diagnoser is designed using the methodology described in this paper and implemented by means of a discrete event system which carries out the mode recognition and diagnostic tasks, both based on residuals generated using models. Both tasks interact each other since the diagnosis module adapts according to the current mode of the hybrid system. The mode recognition task involves detecting and identifying the mode change by determining the set of residuals that are consistent with the current mode of the hybrid system.
On the other hand, the diagnostic task involves detecting and isolating faults by identifying the fault that can explain the set of residuals that are inconsistent. A section of the Barcelona sewer network is used as application case study to illustrate the proposed fault diagnosis for hybrid
systems.
CitacióVento, J.; Puig, V.; Sarrate, R. A methodology for building a fault diagnoser for hybrid systems. A: European Workshop on Advanced Control and Diagnosis. "Proccedings of the 9th European Workshop on Advanced Control and Diagnosis". Budapest: 2011, p. 1-8.
Versió de l'editorhttp://www.conferences.hu/acd2011/paper-38.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
paper-38.pdf | 161,6Kb | Accés restringit |