DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Altres >
Enviament des de DRAC >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/12607

Ítem no disponible en accés obert per política de l'editorial

Arxiu Descripció MidaFormat
xylanasae-and laccase.pdf623,91 kBAdobe PDF Accés restringit

Citació: Aracri, E.; Vidal, T. Xylanase- and laccase-aided hexenuronic acids and lignin removal from specialty sisal fibres. "Carbohydrate polymers", 2011, vol. 83, núm. 3, p. 1355-1362.
Títol: Xylanase- and laccase-aided hexenuronic acids and lignin removal from specialty sisal fibres
Autor: Aracri, Elisabetta Veure Producció científica UPC; Vidal Lluciá, Teresa Veure Producció científica UPC
Data: 2011
Tipus de document: Article
Resum: This work was conceived to investigate for the first time the effectiveness of the combined use of xylanase and laccase for the removal of hexenuronic acids (HexA) and lignin from sisal pulp fibres. To this end, xylanase (X) and laccase (L) treatments were used in an XLQPo sequence (where Q denotes a chelating stage and Po an oxygen-reinforced peroxide multi-step treatment) that was applied to pulp in order to obtain sisal fibres with a high cellulose content. The results of the XLQPo sequence were compared with those of an LQPo sequence. The L stage of both sequences was performed in the presence of either the natural compound sinapyl aldehyde (SLD) or the synthetic compound violuric acid (VA), employed as mediators, in order to compare their efficiency in aiding pulp bleaching and HexA removal. Changes in HexA content and the contributions of lignin and HexA to kappa number during each sequence were examined. The xylanase treatment was found to remove 47% of lignin, 15% of xylan and 27% of HexA from the initial pulp, whereas the laccase–VA system removed 28% of HexA and exhibited higher efficiency than the laccase–SLD system in reducing kappa number and increasing brightness. In any case, when the X treatment was applied, the sequence including laccase–SLD treatment resulted in the strongest delignification effect. The effluents from each stage of the bleaching sequences were analysed for COD, colour and toxicity, which peaked after the L stage and were significantly higher with SLD than with VA
ISSN: 0144-8617
URI: http://hdl.handle.net/2117/12607
DOI: 10.1016/j.carbpol.2010.09.058
Versió de l'editor: http://cataleg.upc.edu/record=b1236722~S1*cat
Apareix a les col·leccions:Altres. Enviament des de DRAC
CIPAGRAF - Grup de Recerca Paperer i Gràfic. Articles de revista
Departament d'Enginyeria Tèxtil i Paperera. Articles de revista
Comparteix:


Stats Mostra les estadístiques d'aquest ítem

SFX Query

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets.

Per a qualsevol ús que se'n vulgui fer no previst a la llei, dirigiu-vos a: sepi.bupc@upc.edu

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius