DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Altres >
Enviament des de DRAC >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/12345

Arxiu Descripció MidaFormat
albaborrar.pdf387,94 kBAdobe PDFThumbnail
Veure/Obrir

Citació: Sands, D. [et al.]. Design method for a reconfigurable mechanism for finger rehabilitation. A: IASTED International Conference on Robotics and Applications. "15th IASTED International Conference on Robotics and Applications". Cambridge: 2010, p. 1-8.
Títol: Design method for a reconfigurable mechanism for finger rehabilitation
Autor: Sands, Davin; Pérez Gracia, Alba Veure Producció científica UPC; McCormack, Jay; Wolbrecht, Eric T.
Data: 2010
Tipus de document: Conference report
Resum: This paper presents a design method for a reconfigurable single degree-of-freedom mechanism for robotic assisted finger therapy following a stroke. The mechanism is a four-bar linkage that in combination with variable link lengths is capable of reproducing a power grasp finger motion for a wide variety of finger sizes. This is accomplished through an optimization procedure that determines the parameters of the four-bar linkage needed to fit the sampled range of finger trajectories. The linkage is located behind the hand and attaches to the medial phalanx of the finger just above the distal interphalangeal joint. In addition, the mechanism is designed so that it does not interfere with finger motion and so that the subject‘s fingertips and palm are free to touch real objects and experience tactile feedback. In future implementations, the mechanism could be used for a single finger or in parallel with other similar mechanisms to exercise multiple fingers simultaneously. Although the specific application presented here is the four-bar mechanism and finger power grasp motion, the developed design methods may be applied to a much broader range of mechanisms and applications where scalability for human-machine interface is required.
URI: http://hdl.handle.net/2117/12345
Versió de l'editor: http://www.actapress.com/PaperInfo.aspx?PaperID=41519&reason=500
Apareix a les col·leccions:Altres. Enviament des de DRAC
Institut de Robòtica i Informàtica Industrial, CSIC-UPC. Ponències/Comunicacions de congressos
Comparteix:


Stats Mostra les estadístiques d'aquest ítem

SFX Query

Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons Llicència Creative Commons
Creative Commons

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius