Plastic behaviuor of green powder metallurgical compacts
Visualitza/Obre
Article (468,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.4028/www.scientific.net/MSF.534-536.305
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/11920
Tipus de documentArticle
Data publicació2007-01
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The results of monotonic and cyclic uniaxial compression tests, in which the deviatoric
component of the stress is predominant, carried out on green and recrystallized iron compacts with different levels of density are presented and discussed in order to analyse the macro and micromechanisms
governing the mechanical behaviour of non-sintered PM materials. The plastic
deformation of the particles, especially at the contact areas between neighbouring particles, produces an internal friction responsible for the main features observed in the behaviour of green metallic compacts. These experimental results show important discrepancies with the plasticity models, Cam-Clay and Drucker-Prager Cap, used to simulate the powder compaction stage. Possible causes for these discrepancies are pointed out.
CitacióPrado, J.; Riera, M. Plastic behaviuor of green powder metallurgical compacts. "Materials science forum", Gener 2007, vol. 534-536, núm. 1, p. 305-308.
ISSN0255-5476
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MSF-PLASTIC-2007.pdf | Article | 468,6Kb | Accés restringit |