Stability of nanocrystalline spark plasma sintered 3Y-TZP
Visualitza/Obre
Cita com:
hdl:2117/11693
Tipus de documentArticle
Data publicació2010
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Spark plasma sintered 3Y-TZP has been investigated with respect to hydrothermal ageing and grinding. The sintering was performed between the temperatures of 1,100 and 1,600 °C for a soaking time of 5 minutes and the resulting materials were obtained with grain sizes between 65 to 800 nm and relative densities between 88.5 to 98.8%. Experiments on hydrothermal ageing in water vapour at 131 °C, 2 bars during 60 hours shows that phase stability is retained, elastic modulus and hardness of near
surface region measured by nanoindentation does not change in fine grain (<200 nm)
materials, in spite of porosity. In ground specimens, very small amount of transformation was found for all grain sizes studied.
CitacióChitapalli, R. [et al.]. Stability of nanocrystalline spark plasma sintered 3Y-TZP. "Materials", 2010, vol. 3, núm. 2, p. 800-814.
ISSN1996-1944
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
materials-03-00800.pdf | 728,6Kb | Visualitza/Obre |