Design and analysis of the droop control method for parallel inverters considering the impact of the complex impedance on the power sharing
Visualitza/Obre
droop.pdf (2,833Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/11564
Tipus de documentArticle
Data publicació2011-02
EditorIEEE Press. Institute of Electrical and Electronics Engineers
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper investigates the characteristics of the active
and reactive power sharing in a parallel inverters system
under different system impedance conditions. The analyses conclude
that the conventional droop method cannot achieve efficient
power sharing for the case of a system with complex impedance
condition. To achieve the proper power balance and minimize the
circulating current in the different impedance situations, a novel
droop controller that considers the impact of complex impedance
is proposed in this paper. This controller can simplify the coupled
active and reactive power relationships, which are caused by the
complex impedance in the parallel system. In addition, a virtual
complex impedance loop is included in the proposed controller to
minimize the fundamental and harmonic circulating current that
flows in the parallel system. Compared to the other methods, the
proposed controller can achieve accurate power sharing, offers
efficient dynamic performance, and is more adaptive to different
line impedance situations. Simulation and experimental results are
presented to prove the validity and the improvements achieved by
the proposed controller.
CitacióYao, W. [et al.]. Design and analysis of the droop control method for parallel inverters considering the impact of the complex impedance on the power sharing. "IEEE transactions on industrial electronics", Febrer 2011, vol. 58, núm. 2, p. 576-588.
ISSN0278-0046
Versió de l'editorhttp://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=05437251
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
droop.pdf | 2,833Mb | Accés restringit |