Structure and strength of (1 1 0) tilt grain boundaries in bcc Fe: an atomistic study
Visualitza/Obre
structurestrengthtilt.pdf (2,611Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/10228
Tipus de documentArticle
Data publicació2010-08
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this work we study a set of $\left<{1\:1\:0}\right>$ tilt grain boundaries (GB) with a misorientation angle varied from 26º to 141º by applying atomistic calculations in α-Fe. A set of different interatomic potentials was used
to deduce the most energetically favourable configurations, the gamma surface profile and sliding pathway.
The uniaxial loading tests were performed by pulling apart two grains to calculate the separation energy profile, cleavage stress and to study the process of the formation of free surfaces during the simulated cleavage fracture. We show that the resistance of a grain boundary to slide is closely related to its structure. The results of the loading tests have shown that the cleavage fracture process may involve: (i) reconstruction of the surface and/or formation of two non-equivalent open surfaces; (ii) movement of the grain boundary front, which involves sliding and thus allows to accommodate the applied strain by plastic deformation.
CitacióTerentyev, D. [et al.]. Structure and strength of (1 1 0) tilt grain boundaries in bcc Fe: an atomistic study. "Computational materials science", Agost 2010, vol. 49, núm. 2, p. 419-429.
ISSN0927-0256
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
structurestrengthtilt.pdf | 2,611Mb | Accés restringit |