http://hdl.handle.net/2117/3055 Wed, 19 Jun 2013 05:56:01 GMT 2013-06-19T05:56:01Z webmaster.bupc@upc.edu Universitat Politècnica de Catalunya. Servei de Biblioteques i Documentació no http://hdl.handle.net/2117/16259 Title: Rehabilitación energética de edificios escolares en clima mediterráneo: caso de estudio, Barcelona Authors: Bosch González, Montserrat; Rodríguez Cantalapiedra, Inma; Álvarez del Castillo, Javier Abstract: necesidad de reducir el consumo energético se hace cada día más evidente, especialmente en Europa debido a su situación de dependencia energética de países externos a la Unión y también por razones relacionadas con el impacto ambiental y las emisiones asociadas. En este contexto, la rehabilitación energética de edificios es una línea de trabajo prioritaria que actúa sobre el parque edificado, y los edificios públicos deben ser un modelo o ejemplo para impulsar este tipo de actuaciones. Los centros docentes, con un potencial de ahorro muy importante y con unos consumos energéticos asociados básicamente a dos grandes conceptos, la iluminación y la climatización, pueden considerarse como un laboratorio de investigación en cuanto a eficiencia energética. A partir de las experiencias adquiridas durante más de 10 años se ha desarrollado una metodología de análisis para la intervención en edificios docentes en Barcelona con los siguientes objetivos: definir los indicadores estratégicos para identificar las oportunidades de ahorro, evaluar las posibles medidas de reducción de consumos a partir de la limitación de la demanda, analizar y dar contenido al papel de cada uno de los actores que intervienen en las estrategias de uso y gestión de los edificios escolares y establecer los criterios que deben considerarse para realizar las futuras intervenciones de rehabilitación energética. El método, como manera de pensar ordenadamente, ha de permitir optimizar los recursos y descubrir les rutas de trabajo que nos conduzcan al objetivo final: reducir el consumo energético del parque edificado http://hdl.handle.net/2117/16259 Bosch González, Montserrat; Rodríguez Cantalapiedra, Inma; Álvarez del Castillo, Javier no necesidad de reducir el consumo energético se hace cada día más evidente, especialmente en Europa debido a su situación de dependencia energética de países externos a la Unión y también por razones relacionadas con el impacto ambiental y las emisiones asociadas. En este contexto, la rehabilitación energética de edificios es una línea de trabajo prioritaria que actúa sobre el parque edificado, y los edificios públicos deben ser un modelo o ejemplo para impulsar este tipo de actuaciones. Los centros docentes, con un potencial de ahorro muy importante y con unos consumos energéticos asociados básicamente a dos grandes conceptos, la iluminación y la climatización, pueden considerarse como un laboratorio de investigación en cuanto a eficiencia energética. A partir de las experiencias adquiridas durante más de 10 años se ha desarrollado una metodología de análisis para la intervención en edificios docentes en Barcelona con los siguientes objetivos: definir los indicadores estratégicos para identificar las oportunidades de ahorro, evaluar las posibles medidas de reducción de consumos a partir de la limitación de la demanda, analizar y dar contenido al papel de cada uno de los actores que intervienen en las estrategias de uso y gestión de los edificios escolares y establecer los criterios que deben considerarse para realizar las futuras intervenciones de rehabilitación energética. El método, como manera de pensar ordenadamente, ha de permitir optimizar los recursos y descubrir les rutas de trabajo que nos conduzcan al objetivo final: reducir el consumo energético del parque edificado http://hdl.handle.net/2117/14463 Title: MEET: Motif Elements Estimation Toolki Authors: Pairó Castiñeira, Erola; Maynou Fernández, Joan; Vallverdú Ferrer, Montserrat; Gallardo Chacón, Joan Josep; Caminal Magrans, Pere; Marco Colás, Santiago; Perera Lluna, Alexandre Abstract: MEET (Motif Elements Estimation Toolkit) es un paquete en R que integra un conjunto de algoritmos para la detección computacional de los puntos de unión de los factores de transcripción (TFBS). El paquete en R MEET incluye cinco programas de búsqueda de motivos: MEME/MAST (Multiple Expectation-Maximization for Motif Elicitation), Q-residuals, MDscan (Motif Discovery scan), ITEME (Information Theory Elements for Motif Estimation) y Match. Además, permite al usuario trabajar con diferentes algoritmos de alineamiento múltiple: MUSCLE (Multiple Sequence Comparison by Log-Expectation), ClustalW y MEME. El paquete puede trabajar en dos modos diferentes, entrenamiento y detección. El modo entrenamiento permite escoger los parámetros óptimos del detector escogido. Y el modo detección permite, una vez escogidos los parámetros, analizar un genoma en busca de puntos de unión. Además, ambos modos pueden combinar los diferentes métodos de alineamiento y de detección, permitiendo al usuario un amplio abanico de posibilidades. Esta característica permite comparar los diferentes métodos computacionales al mismo nivel,sin realizar ningún agravio comparativo debido al alineamiento. http://hdl.handle.net/2117/14463 Pairó Castiñeira, Erola; Maynou Fernández, Joan; Vallverdú Ferrer, Montserrat; Gallardo Chacón, Joan Josep; Caminal Magrans, Pere; Marco Colás, Santiago; Perera Lluna, Alexandre no MEET (Motif Elements Estimation Toolkit) es un paquete en R que integra un conjunto de algoritmos para la detección computacional de los puntos de unión de los factores de transcripción (TFBS). El paquete en R MEET incluye cinco programas de búsqueda de motivos: MEME/MAST (Multiple Expectation-Maximization for Motif Elicitation), Q-residuals, MDscan (Motif Discovery scan), ITEME (Information Theory Elements for Motif Estimation) y Match. Además, permite al usuario trabajar con diferentes algoritmos de alineamiento múltiple: MUSCLE (Multiple Sequence Comparison by Log-Expectation), ClustalW y MEME. El paquete puede trabajar en dos modos diferentes, entrenamiento y detección. El modo entrenamiento permite escoger los parámetros óptimos del detector escogido. Y el modo detección permite, una vez escogidos los parámetros, analizar un genoma en busca de puntos de unión. Además, ambos modos pueden combinar los diferentes métodos de alineamiento y de detección, permitiendo al usuario un amplio abanico de posibilidades. Esta característica permite comparar los diferentes métodos computacionales al mismo nivel,sin realizar ningún agravio comparativo debido al alineamiento. http://hdl.handle.net/2117/15329 Title: Literature revision_Agent-based models Authors: Chica Mejía, Juan Eduardo Abstract: Literature revision_Agent-based models http://hdl.handle.net/2117/15329 Chica Mejía, Juan Eduardo no Literature revision_Agent-based models http://hdl.handle.net/2117/15381 Title: Dictamen técnico estructural Authors: Muñoz Salinas, Francisco Abstract: Dictamen estructural para determinar el estado de la estructura de un edificio y si ella pudo ser la causa de unas supuestas patologías en el edificio de viviendas plurifamiliar ubicado en la calle GERMANS THOS Y CODINA nº 6 de Mataró en la provincia de Barcelona, España. http://hdl.handle.net/2117/15381 Muñoz Salinas, Francisco no Dictamen estructural para determinar el estado de la estructura de un edificio y si ella pudo ser la causa de unas supuestas patologías en el edificio de viviendas plurifamiliar ubicado en la calle GERMANS THOS Y CODINA nº 6 de Mataró en la provincia de Barcelona, España. http://hdl.handle.net/2117/16702 Title: Performance assessment & synergic operation of algorithmic solutions enabling opportunistic networks– D4.2 Authors: Demestichas, Panagiotis; Pérez Romero, Jordi; Sallent Roig, José Oriol; Bouali, Faouzi; Ferrús Ferré, Ramón Antonio; Karvounas, Dimitrios; Georgakopoulos, Andreas; Stavroulaki, Vera; Tsagkaris, Kostas; Riaz, Maryam; Bourdellès, Michel; Vahid, Seiamak; Gebert, Jens; Fuchs, Rolf; Moreno, Oscar; Matinmikko, Marja; Sarvanko, Heli; Boskovic, Dragan; Tosic, M.; Alnwaimi, Ghassan; Rakotoharison, Lanto; Panaitopol, Dorin; Bagayoko, Abdoulaye; Mouton, Christian; Lee, Haeyoung; Shariat, Shahin Abstract: Deliverable D4.2 del projecte europeu OneFIT http://hdl.handle.net/2117/16702 Demestichas, Panagiotis; Pérez Romero, Jordi; Sallent Roig, José Oriol; Bouali, Faouzi; Ferrús Ferré, Ramón Antonio; Karvounas, Dimitrios; Georgakopoulos, Andreas; Stavroulaki, Vera; Tsagkaris, Kostas; Riaz, Maryam; Bourdellès, Michel; Vahid, Seiamak; Gebert, Jens; Fuchs, Rolf; Moreno, Oscar; Matinmikko, Marja; Sarvanko, Heli; Boskovic, Dragan; Tosic, M.; Alnwaimi, Ghassan; Rakotoharison, Lanto; Panaitopol, Dorin; Bagayoko, Abdoulaye; Mouton, Christian; Lee, Haeyoung; Shariat, Shahin no Deliverable D4.2 del projecte europeu OneFIT http://hdl.handle.net/2117/18800 Title: Efficient margin adaptive scheduling for MIMO-OFDMA systems Authors: Moretti, Marco; Pérez Neira, Ana Isabel Abstract: In this paper we address the problem of margin adaptive scheduling in the downlink of an orthogonal frequency division multiple access (OFDMA) multiple-input multiple-output (MIMO) system. Optimal resource allocation in MIMO systems requires the joint optimization of: a) linear transmit and receive spatial filters, b) channel assignment and c) power allocation. This problem is not convex and its complexity becomes thus intractable already for small sets of users and subcarriers. To reduce the complexity of the problem at hand, we propose a novel heuristic strategy that partitions the users in different groups according to their average channel quality and addresses the original problem by solving a succession of lower-complexity allocation problems. The spatial dimension is employed to prevent multiple access interference from hindering the performance of the sequential allocation. To further reduce the complexity burden we introduce a linear programming formulation in combination with a waterfilling-based strategy to allocate channels and power to the groups of users. Numerical results and evaluation of the computational complexity show that, though suboptimal, in most cases the proposed algorithm manages to exploit in an original way the inherent multi-user diversity of multi-carrier systems to ease the task of resource allocation with a very limited performance loss from the theoretic optimum. http://hdl.handle.net/2117/18800 Moretti, Marco; Pérez Neira, Ana Isabel no Allocation problems, Channel allocation, Channel Assignment, Channel quality, Heuristic strategy, Joint optimization, Linear programming formulation, Margin adaptive, MIMO-OFDMA, Multi carrier systems, Multiple-input-multiple-output systems, Multiuser diversity, Numerical results, OFDMA, Optimal resource allocation, Orthogonal frequency division multiple access, Performance loss, Power allocations, Spatial dimension, Spatial filters, Sub-carriers, MIMO systems, Mobile telecommunication systems, Multiple access interference, Optimization, Resource allocation, Scheduling, Frequency division multiple access In this paper we address the problem of margin adaptive scheduling in the downlink of an orthogonal frequency division multiple access (OFDMA) multiple-input multiple-output (MIMO) system. Optimal resource allocation in MIMO systems requires the joint optimization of: a) linear transmit and receive spatial filters, b) channel assignment and c) power allocation. This problem is not convex and its complexity becomes thus intractable already for small sets of users and subcarriers. To reduce the complexity of the problem at hand, we propose a novel heuristic strategy that partitions the users in different groups according to their average channel quality and addresses the original problem by solving a succession of lower-complexity allocation problems. The spatial dimension is employed to prevent multiple access interference from hindering the performance of the sequential allocation. To further reduce the complexity burden we introduce a linear programming formulation in combination with a waterfilling-based strategy to allocate channels and power to the groups of users. Numerical results and evaluation of the computational complexity show that, though suboptimal, in most cases the proposed algorithm manages to exploit in an original way the inherent multi-user diversity of multi-carrier systems to ease the task of resource allocation with a very limited performance loss from the theoretic optimum. http://hdl.handle.net/2117/15493 Title: Poster CONSTRUMAT Start-up Panel Authors: Burns, Malcolm Abstract: Poster CONSTRUMAT Start-up Panel http://hdl.handle.net/2117/15493 Burns, Malcolm no Poster CONSTRUMAT Start-up Panel http://hdl.handle.net/2117/15144 Title: Informe socio-residencial del barrio centro de Fuenlabrada Authors: Garcia-Almirall, M. Pilar Abstract: INFORME SOCIO-RESIDENCIAL DEL BARRIO CENTRO DE FUENLABRADA http://hdl.handle.net/2117/15144 Garcia-Almirall, M. Pilar no INFORME SOCIO-RESIDENCIAL DEL BARRIO CENTRO DE FUENLABRADA http://hdl.handle.net/2117/15483 Title: Delimitación de los sistemas urbanos de la costa ibérica: España y Algarve (Portugal) Authors: Moix Bergadà, Montserrat Abstract: DELIMITACIÓN DE LOS SISTEMAS URBANOS DE LA COSTA IBÉRICA: ESPAÑA Y ALGARVE (PORTUGAL) http://hdl.handle.net/2117/15483 Moix Bergadà, Montserrat no DELIMITACIÓN DE LOS SISTEMAS URBANOS DE LA COSTA IBÉRICA: ESPAÑA Y ALGARVE (PORTUGAL) http://hdl.handle.net/2117/14837 Title: Wahrnehmung des Raumes : Malerei um 1800 Authors: Usandizaga Calparsoro, Miguel M. http://hdl.handle.net/2117/14837 Usandizaga Calparsoro, Miguel M. no http://hdl.handle.net/2117/14928 Title: Modelling shoreline sand waves: application to the coast of Namibia Authors: Falqués Serra, Albert; Van den Berg, Niels; Ribas Prats, Francesca; Caballeria Suriñach, Miquel Abstract: The SW coast of Africa (Namibia and part of Angola) features very long sandy beaches and a wave climate dominated by energetic swells from the SSW, therefore approaching the coast with a very high obliquity. Satellite images reveal that along that coast there are many shoreline sand waves with wavelengths ranging from 2 to 8 km. A more detailed study, including a Fourier analysis of the shoreline position, confirms a high spectral density concentration at these lengths scales. Also, it becomes apparent that at least some of the sand waves are dynamically active rather than being controlled by the geological setting. A morphodynamic model is used to test the hypothesis that these sand waves could emerge as free morphodynamic instabilities of the coastline due to the obliquity in wave incidence. It is found that the wave period, Tp, is crucial to establish the tendency to stability or instability, instability increasing for decreasing period, whilst there is some discrepancy in the observed periods. Model results for Tp = 7 s clearly show the tendency for the coast to develop free sand waves at 2 km wavelength within a few years, which migrate to the north at rates of 0.6-0.7 km/yr. For Tp = 8 s, instability is weaker and rather sensitive to other factors as the underlying bathymetry. In this case, the coast seems to be nearly at neutral stability so that sand waves originated from other mechanisms can propagate downdrift with little decay. http://hdl.handle.net/2117/14928 Falqués Serra, Albert; Van den Berg, Niels; Ribas Prats, Francesca; Caballeria Suriñach, Miquel no The SW coast of Africa (Namibia and part of Angola) features very long sandy beaches and a wave climate dominated by energetic swells from the SSW, therefore approaching the coast with a very high obliquity. Satellite images reveal that along that coast there are many shoreline sand waves with wavelengths ranging from 2 to 8 km. A more detailed study, including a Fourier analysis of the shoreline position, confirms a high spectral density concentration at these lengths scales. Also, it becomes apparent that at least some of the sand waves are dynamically active rather than being controlled by the geological setting. A morphodynamic model is used to test the hypothesis that these sand waves could emerge as free morphodynamic instabilities of the coastline due to the obliquity in wave incidence. It is found that the wave period, Tp, is crucial to establish the tendency to stability or instability, instability increasing for decreasing period, whilst there is some discrepancy in the observed periods. Model results for Tp = 7 s clearly show the tendency for the coast to develop free sand waves at 2 km wavelength within a few years, which migrate to the north at rates of 0.6-0.7 km/yr. For Tp = 8 s, instability is weaker and rather sensitive to other factors as the underlying bathymetry. In this case, the coast seems to be nearly at neutral stability so that sand waves originated from other mechanisms can propagate downdrift with little decay. http://hdl.handle.net/2117/15569 Title: El Santuari de Nostra Sra. de la Misericòrdia de Canet de Mar: història i arquitectura Authors: Meca Acosta, Benito; Rosselló i Nicolau, Maribel; Alcalde Vilà, Sergi Abstract: El Santuari de Nostra Sra. de la Misericòrdia de Canet de Mar: història i arquitectura http://hdl.handle.net/2117/15569 Meca Acosta, Benito; Rosselló i Nicolau, Maribel; Alcalde Vilà, Sergi no El Santuari de Nostra Sra. de la Misericòrdia de Canet de Mar: història i arquitectura http://hdl.handle.net/2117/19571 Title: Experimental study on resistance to cracking of bituminous mixtures using the Fénix Test Authors: Pérez Jiménez, Félix Edmundo; Botella Nieto, Ramón; Valdés Vidal, Gonzalo Abstract: The Road Research Laboratory of the Technical University of Catalonia (UPC) has developed a new tensile test called Fénix test. The objective of this test is to evaluate bituminous mixture crack behaviour. It is a simple procedure and has a low cost set up. The aim of this paper is to present Fénix test as a procedure to determine crack resistance through calculation of dissipated energy during the process. Test procedure and data analysis are shown for different types of mixtures. Variables studied were load application velocity, aging, binder type, binder content, test temperature and compaction temperature. As a result, authors found out that Fénix test is an effective procedure to determine mechanical properties regarding cracking resistance of bituminous mixtures. Tue, 18 Jun 2013 16:02:03 GMT http://hdl.handle.net/2117/19571 2013-06-18T16:02:03Z Pérez Jiménez, Félix Edmundo; Botella Nieto, Ramón; Valdés Vidal, Gonzalo no The Road Research Laboratory of the Technical University of Catalonia (UPC) has developed a new tensile test called Fénix test. The objective of this test is to evaluate bituminous mixture crack behaviour. It is a simple procedure and has a low cost set up. The aim of this paper is to present Fénix test as a procedure to determine crack resistance through calculation of dissipated energy during the process. Test procedure and data analysis are shown for different types of mixtures. Variables studied were load application velocity, aging, binder type, binder content, test temperature and compaction temperature. As a result, authors found out that Fénix test is an effective procedure to determine mechanical properties regarding cracking resistance of bituminous mixtures. http://hdl.handle.net/2117/19570 Title: Boron diffused emitters passivated with Al2O3 films Authors: Masmitja Rusinyol, Gerard; Ortega Villasclaras, Pablo Rafael; López Rodríguez, Gema; Calle Martin, Eric; García Molina, Francisco Miguel; Martín García, Isidro; Orpella García, Alberto; Voz Sánchez, Cristóbal; Alcubilla González, Ramón Abstract: In this work we study the fabrication and characterization of boron diffused emitters using FZ c-Si(n) substrates. Emitter surface was passivated with Al2O3(25 nm thick) layers deposited by thermal atomic layer deposition ALD technique. This study covers a broad emitter sheet resistance Rsh range from 20 to 250 Ω/sq using both polished and textured wafers. Emitter electrical quality was tested by means of lifetime measurements using quasi-stationary photoconductance QSS-PC method. Dark saturation emitter current densities Joe's were extracted from lifetime measurements resulting in Joe's values ranging from 10 to 150 fA/cm2 depending on Rsh. These results are in the-state-of-the-art in boron emitter passivation. Tue, 18 Jun 2013 14:03:35 GMT http://hdl.handle.net/2117/19570 2013-06-18T14:03:35Z Masmitja Rusinyol, Gerard; Ortega Villasclaras, Pablo Rafael; López Rodríguez, Gema; Calle Martin, Eric; García Molina, Francisco Miguel; Martín García, Isidro; Orpella García, Alberto; Voz Sánchez, Cristóbal; Alcubilla González, Ramón no Boron, Atomic layer deposition, Electron devices, Passivation, Silicon, Silicon wafers, Solar cells In this work we study the fabrication and characterization of boron diffused emitters using FZ c-Si(n) substrates. Emitter surface was passivated with Al2O3(25 nm thick) layers deposited by thermal atomic layer deposition ALD technique. This study covers a broad emitter sheet resistance Rsh range from 20 to 250 Ω/sq using both polished and textured wafers. Emitter electrical quality was tested by means of lifetime measurements using quasi-stationary photoconductance QSS-PC method. Dark saturation emitter current densities Joe's were extracted from lifetime measurements resulting in Joe's values ranging from 10 to 150 fA/cm2 depending on Rsh. These results are in the-state-of-the-art in boron emitter passivation. http://hdl.handle.net/2117/19569 Title: ARBRES: Light-weight CW/FM SAR sensors for small UAVs Authors: Aguasca Solé, Alberto; Acevo Herrera, René; Broquetas Ibars, Antoni; Mallorquí Franquet, Jordi Joan; Fabregas Canovas, Francisco Javier Abstract: This paper describes a pair of compact CW/FM airborne SAR systems for small UAV-based operation (wingspan of 3.5 m) for low-cost testing of innovative SAR concepts. Two different SAR instruments, using the C and X bands, have been developed in the context of the ARBRES project, each of them achieving a payload weight below 5 Kg and a volume of 13.5 dm3 (sensor and controller). Every system has a dual receiving channel which allows operation in interferometric or polarimetric modes. Planar printed array antennas are used in both sensors for easy system integration and better isolation between transmitter and receiver subsystems. First experimental tests on board a 3.2 m wingspan commercial radio-controlled aircraft are presented. The SAR images of a field close to an urban area have been focused using a back-projection algorithm. Using the dual channel capability, a single pass interferogram and Digital Elevation Model (DEM) has been obtained which agrees with the scene topography. A simple Motion Compensation (MoCo) module, based on the information from an Inertial+GPS unit, has been included to compensate platform motion errors with respect to the nominal straight trajectory. Tue, 18 Jun 2013 12:40:57 GMT http://hdl.handle.net/2117/19569 2013-06-18T12:40:57Z Aguasca Solé, Alberto; Acevo Herrera, René; Broquetas Ibars, Antoni; Mallorquí Franquet, Jordi Joan; Fabregas Canovas, Francisco Javier no airborne radar autonomous aerial vehicles CW radar digital elevation models FM radar Global Positioning System inertial navigation microstrip antenna arrays motion compensation planar antenna arrays radar imaging radar interferometry radar receivers radar transmitters remote sensing by radar sensors synthetic aperture radar This paper describes a pair of compact CW/FM airborne SAR systems for small UAV-based operation (wingspan of 3.5 m) for low-cost testing of innovative SAR concepts. Two different SAR instruments, using the C and X bands, have been developed in the context of the ARBRES project, each of them achieving a payload weight below 5 Kg and a volume of 13.5 dm3 (sensor and controller). Every system has a dual receiving channel which allows operation in interferometric or polarimetric modes. Planar printed array antennas are used in both sensors for easy system integration and better isolation between transmitter and receiver subsystems. First experimental tests on board a 3.2 m wingspan commercial radio-controlled aircraft are presented. The SAR images of a field close to an urban area have been focused using a back-projection algorithm. Using the dual channel capability, a single pass interferogram and Digital Elevation Model (DEM) has been obtained which agrees with the scene topography. A simple Motion Compensation (MoCo) module, based on the information from an Inertial+GPS unit, has been included to compensate platform motion errors with respect to the nominal straight trajectory.