Exploració per tema "Fabricació"
Ara es mostren els items 16-35 de 190
-
Banca de atuadores mecánicos para manipulação de bolas de bilhar
(2013)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autor
Realitzat a/amb: Gislotica / Instituto Superior de Engenharia do Porto -
Burnishing of AM materials to obtain high performance part surfaces
(OmniaScience, 2022)
Article
Accés obertPurpose: This paper aims to provide a flexible solution to include additive manufacturing into a process chain complying with Industry 4.0 pillars, overcoming major drawbacks in terms of reliability and experimental effort. ... -
Caracterització de recobriments electrolítics base níquel per a la seva utilització a alta temperatura
(Universitat Politècnica de Catalunya, 2016-07-12)
Treball Final de Grau
Accés restringit per acord de confidencialitat
Realitzat a/amb: Vac-Tron -
Case study on multi-material 3D printing for multiple state sensor units: command joystick set
(2023)
Text en actes de congrés
Accés restringit per política de l'editorialIn recent years there has been an increase in the interest, and in the results obtained in the field of functional-graded material applications for achieving active parts via the application of 3D printing technologies. ... -
Classification of industrial sectors based on their profiles of greenhouse gas emissions and policy implications
(OmniaScience, 2023-09)
Article
Accés obertPurpose: This article reports on a study of greenhouse gases emitted by industrial manufacturing sectors and gives insights into the appropriate orientation of emission reduction public programmes for better efficiency. ... -
Cobalt manganese based coatings via inkjet printing for metallic interconnects in solid oxide cell applications (B0516)
(2018)
Comunicació de congrés
Accés obertThe lowering of the operational temperature of Solid Oxide Cells (SOCs) has made possible the use of ferritic stainless steels (FSS) produced by conventional powder metallurgic (PM). FSS can ensure good electrical conductivity, ... -
Comparativa entre las propiedades de piezas impresas por FDM con filamentos de PLA con carga de distintos metales
(Universitat Politècnica de Catalunya, 2022-05-26)
Treball Final de Grau
Accés restringit per decisió de l'autorEn este proyecto, correspondiente a un Trabajo de Fin de Grado (TFG), se estudia el proceso de impresión 3D mediante la fabricación aditiva (en concreto por la tecnología de FDM) de materiales plásticos, como el PLA (ácido ... -
Comparison of production strategies and degree of postponement when incorporating additive manufacturing to product supply chains
(2017-10-06)
Article
Accés obertThe best-selling products manufactured nowadays are made in long series along rigid product value chains. Product repetition and continuous/stable manufacturing is seen as a chance for achieving economies of scale. ... -
Concurrent conceptual evaluation of tolerances’ synthesis in mechanical design
(2011-06-02)
Article
Accés restringit per política de l'editorial -
Continuous improvement of the production process: Automated rejection system
(Universitat Politècnica de Catalunya, 2023-07-11)
Treball Final de Grau
Accés obert
Realitzat a/amb: Labiana Life SciencesThe objective of the work is the design of a mechanical system that allows the implementation and improvement of a rejection automated system, in the conditioning packaging cases of pharmaceutical products, in a real ... -
Crack-free laser powder bed fusion by substrate design
(Elsevier, 2022-11)
Article
Accés obertAdditively manufactured components by laser powder bed fusion (LPBF) often suffer from stress-induced cracks (e.g. delamination), especially at the build-substrate interfaces where stiff mechanical constraints and large ... -
Definition of a printability tool to select appropriate Additive Manufacturing (AM) processes
(Universitat Politècnica de Catalunya, 2020-07-20)
Treball Final de Grau
Accés restringit per decisió de l'autorThis project develops and improves an extension of an existing tool. Currently, it allows to know if there is the possibility of manufacturing a piece with an additive manufacturing (AM) process, and provides a quotation ... -
Definition of the manufacture and industrialization system of ESPSEVG Racing Team's motorcycle
(Universitat Politècnica de Catalunya, 2015-01-29)
Treball Final de Grau
Accés restringit per decisió de l'autorL’objectiu d’aquest projecte és el desenvolupament d’un pla d’industrialització i fabricació del prototipus de motocicleta de competició desenvolupat per l’equip EPSEVG Racing Team. Per a fer-ho, és fixa com a objectiu ... -
Desarrollo integral de líneas de producción para la fabricación de trenes y tranvías
(Universitat Politècnica de Catalunya, 2012-01-11)
Projecte/Treball Final de Carrera
Accés obert -
Design for Additive Manufacturing
(Universitat Politècnica de Catalunya, 2012)
Treball Final de Grau
Accés restringit per decisió de l'autorThis Thesis, Design for Additive Manufacturing, has been mainly focused on the design process and the considerations to be taken into account when designing parts for Additive Manufacturing. It starts with an introduction ... -
Design of a Formula Student race car tubular chassis
(Universitat Politècnica de Catalunya, 2021-07-02)
Treball Final de Grau
Accés restringit per decisió de l'autorL'objectiu del projecte es crear una guia que ajudi qualsevol estudiant amb formació tècnica a dissenyar i construir un xassís tubular d'un cotxe fórmula d'estudiants. A la memòria es detallen tots els passos i processos ... -
Design of a gripper for automated disassembly process of automotive components
(2008-08)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autor
Realitzat a/amb: Technische Universität Berlin -
Designing the process of implementing step three of the theory of constraints in a make-to-order environment: Integrating sales and operation planning
(OmniaScience, 2023-09)
Article
Accés obertPurpose: The theory of constraints (TOC) methodology and its drum-buffer-rope (DBR) production planning and control system are well suited to managing production plants in complex environments. The objective of this study ... -
Digital continuity for additive manufacturing
(Universitat Politècnica de Catalunya / École Centrale de Nantes, 2017-09)
Projecte Final de Màster Oficial
Accés obertLa fabrication additive (FA) consiste en l'addition successive de couches matérielle s jusqu 'a ce que la piece finale souhaitée soit achevée. En plus de la complexité des relations entre tous les différents produits ... -
Digitalització d'un taller de fabricació mecànica
(Universitat Politècnica de Catalunya, 2022-06-30)
Treball Final de Grau
Accés restringit per acord de confidencialitatEl temps és el recurs més important per a la industria manufacturera a dia d’avui. D’aquesta manera, qualsevol millora en el temps d’activitat d’una màquina es tant important com la reducció de temps de cicle, en especial ...