Exploració per tema "Microcontroller"
Ara es mostren els items 1-20 de 39
-
A direct approach for interfacing four-wire resistive sensors to microcontrollers
(2023-03-01)
Article
Accés obertInnovations and technology are the driving forces for new beer industry products, especially in exploring new flavor profiles. Freeze concentration (FC) emerges as an alternative to take advantage of this opportunity. This ... -
A microcontroller-based interface circuit for non-linear resistive sensors
(2021)
Article
Accés obertThis article proposes a circuit based on a microcontroller unit (MCU) for the direct measurement and linearization of non-linear resistive sensors, such as thermistors. The measurement relies on an embedded digital timer ... -
A microcontroller-based interface circuit for three-wire connected resistive sensors
(Institute of Electrical and Electronics Engineers (IEEE), 2022)
Article
Accés obertThis article proposes and experimentally characterizes a novel microcontroller-based interface circuit to read three-wire connected resistive sensors, which are quite common in industrial applications to measure, for ... -
Automatic self-matching network for industrial microwave heating based on the conjugate gradient algorithm
(IEE-INST ELEC ENG, 1999-02-28)
Article
Accés obertAn automatic matching network has been implemented using a waveguide magic T with two sliding short circuit stubs whch are adjusted by a microcontroller running a conjugate gradient algorithm. The inclusion of this device ... -
Automatización y control de un motor a pasos para la sintonización de filtros de microondas
(Universitat Politècnica de Catalunya, 2010-12-15)
Projecte/Treball Final de Carrera
Accés obertCatalà: L'objectiu del projecte és ajustar de forma automàtica la freqüència central de un ressonador de microones a la freqüència que desitgi l'usuari. Per aconseguir-ho, s'introdueix la freqüència desitjada al software ... -
Cloud monitoring system for industrial engines maintenance
(Universitat Politècnica de Catalunya, 2020-07-21)
Projecte Final de Màster Oficial
Accés obertThis document reflects the memory of the Master's Final Project of the master's studies: Master's degree in Automatic Systems and Industrial Electronics Engineering (MUESAEI), from the Polytechnic University of Catalonia ... -
Connection system and registration of medical devices through the CONTINUA protocol
(Universitat Politècnica de Catalunya, 2015-10)
Treball Final de Grau
Accés restringit per decisió de l'autorThe aim of this project is follow the Continua Health Alliance guidelines to collect data using Bluetooth Low Energy from any glucometer device which supports it. This project form part of a larger project which is a ... -
Design and implementation of a prospection system to detect buried objects for achaeological and civil engineering applications
(Universitat Politècnica de Catalunya, 2014-11-03)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autor[ENGLISH] Magnetic prospecting systems allow to locate possible structures and objects under the ground using only measurements in the surface, thus allowing to locate for instance buried pipes in civil engineering or ... -
Design of a simpler ampere-hourmeter
(2013-04-10)
Article
Accés obertIn any application in which working with batteries is a must, the knowledge of the batteries’ state-of-charge (SOC) is a fundamental parameter for anyone, so it determines the remaining capacity in the battery. There exist ... -
Developing a wireless distributed embedded machine learning application for the Arduino Portenta H7
(Universitat Politècnica de Catalunya, 2023-01-23)
Treball Final de Grau
Accés obertL'objectiu del projecte és desenvolupar una aplicació d'aprenentatge automàtic integrada distribuïda sense cables per a Arduino Portenta H7 -
Developing a wireless distributed embedded machine learning application for the Arduino Portenta H7
(Universitat Politècnica de Catalunya, 2023-01-23)
Treball Final de Grau
Accés obertThis project is my Degree Final Project for my Degree in Informatics Engineering in the Computing specialization, which I am studying at the Facultat d'Informàtica de Barcelona (FIB). I will be supervised by Felix Freitag, ... -
Development of an NFC-based system for control and remote communication
(Universitat Politècnica de Catalunya, 2017-02-09)
Treball Final de Grau
Accés restringit per decisió de l'autorNear Field Communication (NFC) is a new short-range contactless communication technology that is the descendent or an evolved form of Radio Frequency Identification (RFID). It is designed to enable exchange of information ... -
Differential inductive sensor-to-microcontroller interface circuit
(Institute of Electrical and Electronics Engineers (IEEE), 2019)
Text en actes de congrés
Accés restringit per política de l'editorialThis paper proposes a low-cost interface circuit for differential inductive sensors where the sensor is directly connected to a microcontroller unit (MCU) without any active intermediate electronics in between. The timer ... -
Direct interface for capacitive sensors based on the charge transfer method
(2007-05-01)
Text en actes de congrés
Accés obertWe present the theoretical analysis and experimental performance results of a direct interface for capacitive sensors based on the charge transfer method when parasitic capacitances are included. The interface circuit ... -
Diseño, montaje y control de una plataforma educacional de levitación neumática
(Universitat Politècnica de Catalunya, 2021-07-06)
Treball Final de Grau
Accés restringit per decisió de l'autorEl projecte actual tracta sobre el disseny i muntatge d’una maqueta destinada a la implementació de diferents controls amb caràcter educacional i/o d’investigació. La funcionalitat de la maqueta es la levitació d’una ... -
Electronic reading of a mechanical gas meter based on dual magnetic sensing
(2021-06-08)
Article
Accés obertThis article proposes a measurement system controlled by a microcontroller unit (MCU) for the electronic reading of a mechanical gas meter. The measurement relies on dual magnetic sensing: (a) low-cost low-power primary ... -
Experimental characterization of off-the-shelf LEDs as photodetectors for waking up microcontrollers
(Institute of Electrical and Electronics Engineers (IEEE), 2019)
Text en actes de congrés
Accés restringit per política de l'editorialThe use of LEDs as photodetectors has been subject of study for a long time. However, LEDs manufacturers do not provide information about the response of LEDs to the light. It is essential for the designers of electronic ... -
Experimental characterization of the energy consumption of ADC embedded into microcontrollers operating in low power
(Institute of Electrical and Electronics Engineers (IEEE), 2019)
Text en actes de congrés
Accés restringit per política de l'editorialThis work aims to experimentally characterize the energy consumption of analog-to-digital converters (ADC) embedded into microcontroller units (MCU) operating in low power for autonomous sensor applications. The study ... -
Experimental study on the power consumption of timers embedded into microcontrollers
(Institute of Electrical and Electronics Engineers (IEEE), 2021)
Text en actes de congrés
Accés obertAn experimental study on the current consumption of timers embedded into microcontrollers is presented in this work. The study is carried out in two commercial microcontrollers (MSP430FR5969 and ATtiny2313) and the ... -
Fabricación de un dispositivo para calcular la energía específica de corte de los materiales
(Universitat Politècnica de Catalunya, 2021-07-13)
Treball Final de Grau
Accés restringit per decisió de l'autorEn l'actualitat cal destacar la importància dels processos de fabricació i en particular, el mecanitzat per arrencament de ferritja. Aquest fenomen es troba en la majoria d'empreses relacionades amb el sector de l'enginyeria. ...