Exploració per tema "Interface"

Ara es mostren els items 1-20 de 29

    • ASR expansions at the level of a single glass-cement paste interface: experimental results and proposal of a reaction-expansion mechanism 

      Liaudat, Joaquín; Carol, Ignacio; López Garello, Carlos María; Leemann, Andreas (Elsevier, 2019-09)
      Article
      Accés obert
      A new experimental methodology for studying ASR expansions at the level of a single aggregate-cementitious matrix interface is proposed. For this methodology, small sandwich-like specimens, with cement paste or mortar on ...

    • Automatización de una línea de trefilado de cobre 

      Méndez Comas, Miguel (Universitat Politècnica de Catalunya, 2010-01)
      Projecte/Treball Final de Carrera
      Accés obert
      Realitzat a/amb:   Aplicacions i Gestió de l'Energia Sabadell
      En este proyecto final de carrera se describe el proceso para el diseño y ejecución de automatización de una línea de producción de trefilado de cobre. La realización de este proyecto viene motivado a consecuencia de ...

    • Bromine etching of kesterite thin films: perspectives in depth defect profiling and device performance improvement 

      Tiwari, Kunal Jogendra; Jiménez Arguijo, Alex; Giraldo, Sergio; Placidi, Marcel Jose; Calvo-Barrio, L; Fonoll Rubio, Robert; Izquierdo Roca, Víctor; Sánchez González, Yudania; Perez Rodriguez, Alejandro; Saucedo Silva, Edgardo Ademar; Jehl Li-Kao, Zacharie (Institute of Electrical and Electronics Engineers (IEEE), 2021)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Using a controlled bromine etching on kesterite absorbers, two major results are obtained. We establish the first defect depth profiling and secondary phases depth profiling of a state of the art Cu2ZnSnSe4 (CZTSe) film ...

    • Deoxyribonucleic acid-based electron selective contact for crystalline silicon solar cells 

      Tom, Thomas; Ros Costals, Eloi; Rovira, David; Lopez Vidrier, Julià; Asensi López, José Miguel; Ortega Villasclaras, Pablo Rafael; Puigdollers i González, Joaquim; Voz Sánchez, Cristóbal; Bertomeu Balagueró, Joan (Wiley, 2023-02-10)
      Article
      Accés obert
      Development of carrier selective contacts for crystalline silicon solar cells has been recently of great interest toward the further expansion of silicon photovoltaics. The use of new electron and hole selective layers has ...

    • Desarrollo de una interfaz de usuario para la aplicación de ciberseguridad HUNTDOWN 

      Franco Baena, Daniel (Universitat Politècnica de Catalunya, 2023-06-28)
      Treball Final de Grau
      Accés obert
      Este proyecto de fin de grado se centra en la actualización de la plataforma de ciberseguridad HuntDown, desarrollada originalmente por estudiantes de la Facultad de Informática de Barcelona. El objetivo principal es ...

    • Design, implementation and testing of 3Cat-4 subsystems 

      Montserrat Canals, Joan (Universitat Politècnica de Catalunya, 2018-10-22)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      Inside the Fly Your Satellite! competition framework, the 3Cat-4 nanosatellite developed by the NanoSat Lab constitutes an educational project designed and built primarily in-house. Within the satellite, this work focuses ...

    • Development of a web interface for managing scientific applications in the field of proteomics 

      Quilez Cuenca, Oriol (Universitat Politècnica de Catalunya, 2014-11-01)
      Treball Final de Grau
      Accés restringit per acord de confidencialitat
      Realitzat a/amb:   University of Washington

    • Disseny i implementació d'una plataforma de proves funcionals utilitzant VirtualBench 

      Marias López, Jessica (Universitat Politècnica de Catalunya, 2016-01)
      Projecte/Treball Final de Carrera
      Accés obert
      The project involves the design and implementation of a standard test platform using LabVIEW and VirtualBench device. The goal is to automate the test of low complexity electronic boards, in the production process of Dicoel ...

    • Effect of extruder type in the interface of PLA layers in FDM printers: filament extruder versus direct pellet extruder 

      Pagés-Llobet, Antoni; Espinach, Francesc Xavier; Julian, Fernando; Oliver Ortega, Helena; Méndez González, José Alberto (Multidisciplinary Digital Publishing Institute (MDPI), 2023-04-24)
      Article
      Accés obert
      FDM (Fused Deposition Modeling) is one of the most used and industrially applied additive manufacturing processes due to its fast prototyping and manufacturing, simplicity, and low cost of the equipment. However, the ...

    • Enhanced stability in semi-transparent PTB7/PC71BM photovoltaic cells 

      Romero Gómez, Pablo; Betancur Lopera, Rafael; Martinez Otero, Alberto; Elias Pera, Xavier; Mariano, Marina; Romero, Beatriz; Arredondo, Belen; Vergaz, Ricardo; Martorell Pena, Jordi (2015-06-01)
      Article
      Accés obert
      We studied the performance over time of opaque and semi-transparent PTB7:PC71BM bulk heterojunction solar cells. For unsealed inverted configuration cells we observe that when the isolation from the environment is improved, ...

    • Estudi d'usabilitat web: cas concret de la pàgina web de l'ETSEIB 

      Valero Gómez, Javier (Universitat Politècnica de Catalunya, 2011-01-19)
      Projecte/Treball Final de Carrera
      Accés obert
      Antigament, es desenvolupaven aplicacions sense tenir en compte els usuaris finals. Aquestes aplicacions eren més properes al llenguatge màquina que al llenguatge humà. No va ser fins el moment en què es va començar a ...

    • Experimental characterization of concrete-to-concrete interface shear strength design-oriented constitutive parameters 

      Monserrat López, Andrea; Nogales Arroyo, Alejandro; Fuente Antequera, Albert de la (Elsevier, 2023-09)
      Article
      Accés obert
      In concrete composite systems, the shear strength between concrete layers cast at different times determines the mechanical performance of the structure. Different mechanisms are identified as potential shear–transfer ...

    • Experimental comparison of three electro-textile interfaces for textile UHF-RFID tags on clothes 

      Luo, Chengyang; Gil Galí, Ignacio; Fernández García, Raúl (2022-03)
      Article
      Accés obert
      Textile Ultra High Frequency (UHF, 865–868 MHz) Radio Frequency Identification (RFID) devices meet difficulties from connection of solid chips and textile antennas. In this work, three electro-textile interfaces integrated ...

    • Experimental study of the effects of mechanical restraints on ASR expansions in concrete 

      Liaudat, Joaquín; López Garello, Carlos María; Carol, Ignacio (2021-03)
      Article
      Accés obert
      This paper summarizes an experimental campaign devoted to the study of the effect of (internal and external) mechanical restraints on Alkali-Silica Reaction (ASR) expansions in concrete made with sodalime (SL) glass as ...

    • Extended hybridizable discontinuous galerkin with heaviside enrichment for heat bimaterial problems 

      Gürkan, Ceren; Kronbichler, Martin; Fernández Méndez, Sonia (2017-01-28)
      Article
      Accés obert
      A novel strategy for the hybridizable discontinuous Galerkin (HDG) solution of heat bimaterial problems is proposed. It is based on eXtended finite element philosophy, together with a level set description of interfaces. ...

    • Herramienta online de prototipado y testeo de aplicaciones mediante inteligencia artificial (IA) 

      Balletbó Morales, Daniel; Fernández López, David (Universitat Politècnica de Catalunya, 2021-06-30)
      Treball Final de Grau
      Accés obert
      Aquest projecte es basa en la ideació i programació d'una aplicació anomenada protoEmotion, que s'ha concebut amb l'afany de facilitar la tasca de testatge de prototips digitals a emprenedors i petites startups que a priori, ...

    • Influence of choice of FLAC and PLAXIS interface models on reinforced soil-structure interactions 

      Yu, Yan; Puig Damians, Ivan; Bathurst, Richard (Elsevier, 2015-04-01)
      Article
      Accés obert
      The choice of structure element to simulate soil reinforcement and soil–structure interaction details for numerical modelling of mechanically stabilized earth (MSE) walls can have a significant influence on numerical ...

    • Interfacing issues in multiagent simulation for smart grid applications 

      Wang, Xin; Zhang, Peng; Wang, Z.; Dinavahi, Venkata; Chang, Yun Lin; Martínez Velasco, Juan Antonio; Davoudi, Ali; Mehrizi-Sani, Ali; Abhyankar, Shrirang (2013-07)
      Article
      Accés restringit per política de l'editorial
      Interfacing issues in multiagent simulation for smart grid applications Wang, X.1; Zhang, P.2; Wang, Z.3; Dinavahi, V.4; Chang, G.5; Martinez, J.A.6; Davoudi, A.7; Mehrizi-Sani, A.8; Abhyankar, S.9 Source: IEEE ...

    • Interfaz multimodal avanzada para el control del climatizador de un turismo 

      Figueras Resina, David (Universitat Politècnica de Catalunya, 2011-01-27)
      Projecte/Treball Final de Carrera
      Accés restringit per acord de confidencialitat

    • O Papel da interface público/privada na vida urbana: o Bairro da Torre, João Pessoa/PB, Brasil 

      Barbosa de Aquino, Caroline; Trigueiro de Araújo Morais, Marcele (Departament d’Urbanisme i Ordenació del Territori. Universitat Politècnica de Catalunya, 2019-06)
      Text en actes de congrés
      Accés obert
      Este artigo é extraído de um trabalho de conclusão de curso, intitulado “O Papel da Interface Público/Privada na Vida Urbana – O Bairro da Torre, João Pessoa”. Esse tipo de interface, de extrema importância na vida urbana ...