Exploració per tema "Electrònica--Aparells i instruments"
Ara es mostren els items 1-20 de 23
-
A 3–5-GHz, 385–540-ps CMOS true time delay element for ultra-wideband antenna arrays
(Elsevier, 2022-05-01)
Article
Accés restringit per política de l'editorialThis paper proposes an all-pass filter-based true time delay (TTD) element covering a 3–5-GHz ultra-wideband (UWB) frequency. The proposed TTD element designed in a standard 0.18-µm CMOS technology achieves a tunable delay ... -
Active-Clamp Flyback converter for USB-PD application design and implementation
(Universitat Politècnica de Catalunya, 2021-05-28)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitat -
An Easy-to-use hand-to-hand impedance-based sensor to obtain carotid pulse arrival time
(2023-03-01)
Article
Accés obertPulse arrival times (PATs) are time intervals between the electrocardiogram (ECG) and an arterial pulse wave (APW) widely used to obtain cuffless blood pressure (BP). Although some distal APWs can be easily measured using, ... -
An electromagnetic vibration energy harvester based on ring magnets with Halbach configuration: numerical modeling
(Universitat Politècnica de Catalunya, 2023-06-27)
Treball Final de Grau
Accés obert
Realitzat a/amb: Université de LilleThe power supply of electronic equipments is one of the major problems, during the construction of new structures. To provide this power supply, the main answer today is by building an electric network. However, this will ... -
Analysis of gender differences in hrv of patients with myalgic encephalomyelitis/chronic fatigue syndrome using mobile-health technology
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-05-28)
Article
Accés obertIn a previous study using mobile-health technology (mHealth), we reported a robust association between chronic fatigue symptoms and heart rate variability (HRV) in female patients with myalgic encephalomyelitis/chronic ... -
Análisis de la instrumentación de la Catedral de Mallorca
(Universitat Politècnica de Catalunya, 2013-05-14)
Tesina
Accés obert -
Avaluació de la relació entre la utilització de dispositius electrònics i els resultats del test DEM
(Universitat Politècnica de Catalunya, 2022-07-06)
Treball Final de Grau
Accés obertL’ús de dispositius electrònics és una tendència a l’alça entre les noves generacions. Molt se’n sap de les contraindicacions o afectacions que pot arribar a provocar a nivell de salut. Però hi ha algun aspecte que en pugui ... -
Desenvolupament del firmware d'una targeta de "Pulse Time Stamping" amb comunicació PCI express
(Universitat Politècnica de Catalunya, 2012-01-13)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorEnglish: this final project has been developed in an ambitious project made by Signadyne, a spin-off of Institut de Ciències Fotòniques (ICFO). This project is enshrined in the modular instrumentation systems and software ... -
Desenvolupament d’una unitat d’adquisició i monitorització de dades per a una vehicle
(Universitat Politècnica de Catalunya, 2020-06-29)
Treball Final de Grau
Accés obertL’objectiu del present projecte és la posada en pràctica dels coneixements adquirits durant el grau, que s’hauran de materialitzar en el present treball. L’usuari d’una bicicleta i l’entorn que l’envolta, generen unes ... -
Diseño de un sistema RF para lecturas de sensores en aplicaciones docentes de proyectos básicos de ingeniería
(Universitat Politècnica de Catalunya, 2012-07-24)
Projecte Final de Màster Oficial
Accés obert[ANGLÈS] The project has as aim implement the new method of studies CDIO, which will be in use in one of the subjects. It consists of the design of a system to do sensors readings which later are transmitted by RF to a ... -
Disseny i construcció d'acobladors híbrids i Lange. I de càrregues de calibració
(Universitat Politècnica de Catalunya, 2006-05)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorEn aquest projecte s’ha dissenyat i construït diversos acobladors híbrids i de Lange per aplicacions docents. S’han realitzat amb tecnologia microstrip a una freqüència de treball de 900 MHz. L’híbrid s’ha dissenyat ... -
Disseny i implementació d'un equip de fil incandescent segons norma UNE-EN 60695
(Universitat Politècnica de Catalunya, 2013-01-11)
Projecte Final de Màster Oficial
Accés obert[ANGLÈS] This project's main objective is to implement an equipment for testing according to UNE EN 60695 on the Fire Laboratory of the Universitat Politècnica de Catalunya. This standard is of great importance in the ... -
Estudi del disseny d'un dispositiu d'assistència mèdica
(Universitat Politècnica de Catalunya, 2024-02-05)
Treball Final de Grau
Accés obertEl principal objectiu d’aquest projecte és l’estudi i l'elaboració d’un dispositiu d'assistència mèdica. Mitjançant una investigació exhaustiva i un desenvolupament pràctic, es busca integrar diverses funcionalitats de ... -
Experimental Characterization of NBTI Effect on pMOSFET and CMOS Inverter
(2009-02)
Comunicació de congrés
Accés obert -
Healthy and open phase PMaSynRM model based on virtual reluctance concept
(2021-11-23)
Article
Accés obertThe trend in the industrial power electronics electrical drives is to reach high power density and high efficiency in variable load conditions at cost-effective unwasteful designs. Currently, motors with permanent magnets ... -
Inductive method for assessing the amount and orientation of steel fibers in concrete
(2012-04-24)
Article
Accés restringit per política de l'editorialSteel fibers are ferromagnetic and they have the property of altering the magnetic field around them. This paper discusses a method and gives a practical example to measure, non-destructively, the amount and orientation ... -
Introducció al laboratori d'electrònica
(Factoria de Recursos Docents del Campus de Terrassa, 2004)
Altres
Accés obert -
Operators to calculate the derivative of digital signals
(2013)
Comunicació de congrés
Accés obertThis paper presents an FIR operator with a very low computational cost for calculating the first derivative of discrete band-limited signals. The basic idea is to use cubic spline polynomials for interpolating among the ... -
Optimization of a clinostat for cell growth monitoring
(Universitat Politècnica de Catalunya, 2023-02-01)
Treball Final de Grau
Accés obert
Realitzat a/amb: Universidade Federal de PernambucoThe effects of microgravity on organisms is an important study field expected to have plenty of applications in the future. The problem is that it is not easy at all to experiment with microgravity. The spatial missions ... -
PSoC based measurament of voltage and current
(2007)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autor
Realitzat a/amb: Cork Institute of Technology