Exploració per tema "Design"
Ara es mostren els items 1-20 de 312
-
4MAT com a model de disseny d'unitats didàctiques de tecnologia a l'ESO
(Universitat Politècnica de Catalunya, 2018-06-20)
Projecte Final de Màster Oficial
Accés obertAquest treball pretén proposar la implementació del model didàctic 4MAT, de Bernice McCarthy, per al disseny d'Unitats Didàctiques de tecnologia a l'ESO a Catalunya. Es tracta d'un model basat en el desenvolupament de ... -
A boolean rule-based approach for manufacturability-aware cell routing
(2014-03-01)
Article
Accés obertAn approach for cell routing using gridded design rules is proposed. It is technology-independent and parameterizable for different fabrics and design rules, including support for multiple-patterning lithography. The core ... -
A centrality-based topology control protocol for wireless mesh networks
(Elsevier, 2015-01-01)
Article
Accés obertNodes in wireless multi-hop networks establish links with their neighbors, which are used for data transmission. In general, in this kind of networks every node has the possibility of acting as a router, forwarding the ... -
A remotely-driven hoverboard with platform leaning control
(Universitat Politècnica de Catalunya, 2019-10)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitat
Realitzat a/amb: Institut de Robòtica i Informàtica Industrial -
A retargetable and accurate methodology for logic-IP-internal electromigration assessment
(2015)
Text en actes de congrés
Accés obertA new methodology for SoC-level logic-IP-internal EM verification is presented, which provides an on-the-fly retargeting capability for reliability constraints. This flexibility is available at the design verification ... -
A review of gerotor technology in hydraulic machines
(2019-06-24)
Article
Accés obertOver the years, numerous investigations have established the gerotor fundamentals. This work aims to provide a complete review of the literature from the last decade, focusing on the articles published in the past five ... -
A robust predictive current controller for healthy and open-circuit faulty conditions of five-phase BLDC drives applicable for wind generators and electric vehicles
(Elsevier, 2015-03-01)
Article
Accés obertFault tolerant control of five-phase brushless direct current (BLDC) machines is gaining more importance in high-safety applications such as offshore wind generators and automotive industries. In many applications, traditional ... -
A study of interaction design in the Catalunya Railway Museum of Vilanova i la Geltrú
(Universitat Politècnica de Catalunya, 2014-06)
Treball Final de Grau
Accés obertEl Museu del Ferrocarril de Catalunya has one of the most renowned and largest train collections in Europe, more than fifty-‐two trains on display, including 28 locomotives, the biggest coll ... -
A survey and taxonomy of ID/Locator Split Architectures
(2014-02-26)
Article
Accés restringit per política de l'editorialThe IP-based addressing scheme currently supporting the whole routing architecture embeds some well-known limitations that may significantly hinder the deployment of new applications and services on the Internet. Indeed, ... -
Abstract design methodologies: non-euclidean and extrinsic design
(Universitat Politècnica de Catalunya, 2022-07-12)
Treball Final de Grau
Accés obertThis thesis is aimed at the study and practical reproduction of video game design methodologies which, as it stands today, are ambiguous in their classification or without a general consensus in their use. Specifically, ... -
Advanced watchdog, remote pair for marine electronics
(Universitat Politècnica de Catalunya, 2018-06-11)
Treball Final de Grau
Accés restringit per decisió de l'autorIn deep sea underwater research, often rigid containers are used to encapsulate and protect the inside electronics. To conserve battery during the transportation of these containers, the battery is turned off up until ... -
Aerodynamic CFD study on a production vehicle: experimental validation on a wind tunnel
(Universitat Politècnica de Catalunya, 2023-07-17)
Treball Final de Grau
Accés obertCFD software technology has gone a long way over the past decades and the automotive industry has evolved on the data they can extract from it. On this basis, this Dissertation plans on modeling and simulating a real ... -
An aerospace requirements setting to improve system design
(Universitat Politècnica de Catalunya / Cranfield University, 2013)
Treball Final de Grau
Accés restringit per decisió de l'autorThe design of modern aircraft engines relies heavily on technological advances. In response to pressures from customers and competitors for improvements in efficiency of performance, scheduling and overall cost reduction, ... -
An extremely thin and robust interconnecting layer providing 76% fill factor in a tandem polymer solar cell architecture
(Royal Society of Chemistry, 2015-04-17)
Article
Accés obertWe report a thin and robust interconnecting layer (ICL) for polymer tandem solar cells. This ICL shows low absorption, good electrical contacts, large work function contrast and robustness. Its use yields tandem cells with ... -
Analysis and implementation of a methodology for optimal PMa-SynRM design taking into account performances and reliability
(Universitat Politècnica de Catalunya, 2018-07-12)
Tesi
Accés obertAutomotive applications focus to develop drive-train technologies with higher energy efficiency and lower environmental impact. Electric and hybrid vehicles are gaining popularity since they fulfill these requirements . ... -
Anàlisi i disseny d'un Add-on per a Navision
(Universitat Politècnica de Catalunya, 2017)
Treball Final de Grau
Accés obert
Realitzat a/amb: Olivia SistemasThis document pretends to reflect both the analysis of requirements and the design of the architecture and the data model, which are needed to develop and implement an add-on for the Warehouse granule of Dynamics Navision, ... -
Análisis arquitectónico: una inmersión en el primer curso de proyectos
(Universitat Politècnica de Catalunya. Iniciativa Digital Politècnica / Grup per a la Innovació i la Logística Docent en l'Arquitectura (GILDA) / Universidad de Zaragoza. Servicio de Publicaciones de la Universidad de Zaragoza, 2018-11)
Text en actes de congrés
Accés obertEl curso de Análisis Arquitectónico fue el punto cero desde donde se implantó, en sus inicios (curso 1997-1998), la línea pedagógica de los estudios de la Escuela de Arquitectura de La Salle - Universidad Ramon Llull, ... -
Análisis del espacio urbano regenerado: Isola (Milán)
(DUOT, UPC, 2020-09-28)
Text en actes de congrés
Accés obertSe plantea un método de análisis del espacio urbano regenerado, con la intención de estudiar su complejidad a través de lecturas abiertas. Este análisis procede con instrumentos gráficos y, por tanto, propone una interfaz ... -
Análisis y mejora del comportamiento en pista de un turismo de competición
(Universitat Politècnica de Catalunya, 2020-07-02)
Treball Final de Grau
Accés obert[CASTELLÀ] En este proyecto se analiza y mejora el comportamiento en pista de un turismo de competición. Para ello, en primer lugar, se analiza el vehículo en servicio, en una situación dinámica real y se comentan las ... -
Anteproyecto de un aeropuerto en el Alt Penedès
(Universitat Politècnica de Catalunya, 2014-12-18)
Treball Final de Grau
Accés restringit per decisió de l'autorIn this project, a new airport in the Alt Penedès region has been conceived, planned and designed. The differential element that distinguishes this airport from others lies in the idea itself that led to it: its goal, since ...
