Exploració per tema "Àrees temàtiques de la UPC::Enginyeria dels materials::Materials plàstics i polímers"
Ara es mostren els items 1-20 de 627
-
A Lagrangian PFEM approach for non-Newtonian viscoplastic materials
(Universitat Politècnica de Catalunya. CIMNE, 2017-07)
Article
Accés obertThis paper presents the application of a stabilized mixed Particle Finite Element Method (PFEM) to the solution of viscoplastic non-Newtonian flows. The application of the proposed model to the deformation of granular ... -
A new class of vitrimers based on aliphatic poly(thiourethane) networks with shape memory and permanent shape reconfiguration
(Elsevier, 2019-01-05)
Article
Accés obertVitrimers are a new promising class of polymeric materials which are attracting increasing attention thanks to their thermosetting characteristics with their capability of being reprocessed and recyclable, which make them ... -
A new two-stage curing system: Thiol-ene/epoxy homopolymerization using an allyl terminated hyperbranched polyester as reactive modifier
(Elsevier, 2013-10-04)
Article
Accés restringit per política de l'editorialAn allyl terminated hyperbranched polyester (HBP) was added to an epoxy formulation containing a trithiol compound to perform a thiol-ene click reaction. By this procedure a flexible thioether network was formed. The ... -
A novel comparative study of different layered silicate clay types on exfoliation process and final nanostructure of trifunctional epoxy nanocomposites
(2016-12)
Article
Accés obertThe effect of three different organically modified layered silicate clays (Nanomer I.30E, Cloisite 30B and Nanofil SE 3000) on the exfoliation process and on the thermal properties and nanostructure of cured trifunctional ... -
A numerical method for calculating the strain rate intensity factor
(CIMNE, 2015)
Comunicació de congrés
Accés obertThe strain rate intensity factor is the coefficient of the leading singular term in a series expansion of the equivalent strain rate in the vicinity of maximum friction surfaces. In the case of rigid perfectly plastic ... -
A Review of the recent advances in cyclic butylene terephthalate technology and its composites
(2016-05)
Article
Accés obertCyclic butylene terephthalate (CBT®) oligomers are a relatively new class of material and are capable of polymerizing in an entropically driven ring-opening polymerization into high-molecular-weight polymerized CBT (pCBT) ... -
A versatile thiol-ene/sol-gel two-stage curing process based on a hyperbranched polyester with different degrees of 10-undecenoyl modification
(2014-04-01)
Article
Accés restringit per política de l'editorialHybrid thiol-ene system based on a hyperbranched polyester with different degrees of 10-undecenoyl modification are prepared via a dual UV-thermal process. The pristine thiol-ene formulation shows a high reactivity towards ... -
Acetoacetate based thermosets prepared by dual-Michael addition reactions
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-01-01)
Article
Accés obertA novel set of dual-curable multiacetoacetate-multiacrylate-divinyl sulfone ternary materials with versatile and manipulable properties are presented. In contrast to common dual-curing systems, the first stage polymer ... -
ACV de bolsas de compra. Aplicación a Córcega. Análisis del cambio de bolsas de un solo uso por alternativas reutilizables.
(Universitat Politècnica de Catalunya, 2014-07-21)
Projecte Final de Màster Oficial
Accés obert -
Adaptación de dos piezas distintas a una pieza bi-materia
(Universitat Politècnica de Catalunya, 2014-06)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorEl presente proyecto se ha realizado en la empresa Faurecia Automotive Exteriors [Anexo-A], para la pieza llamada Spoiler del proyecto parachoques delantero A05GPPOLO del grupo Volkswagen (VW). Dicho proyecto se enfoca ... -
Aligeramiento de peso de PP/GF: materiales compuestos espumados para aplicaciones de automoción
(2018)
Article
Accés obertEl aligeramiento de peso es una de las principales estrategias llevadas a cabo por los fabricantes de automóvile s para reducir consumo de combustible y emisiones de gases de efecto invernadero. Debido a la creciente demanda ... -
Amphiphilic ionic complexes of hyaluronic acid with organophosphonium compounds and their antimicrobial activity
(2018-01-01)
Article
Accés obertAmphiphilic ionic complexes of hyaluronic acid and alkyltrimethylphosphonium soaps with alkyl chains containing even numbers of carbons from 12 to 22 have been produced. The complexes have a nearly stoichiometric composition, ... -
An investigation on the effect of pressure and temperature on microcellular foams of Poly(lactic) acid (PLA)/Acrylonitrile-Butadiene-Styrene (ABS) binary blends
(Springer, 2020-05-30)
Capítol de llibre
Accés restringit per política de l'editorialReducing the weight of petrol-derived plastics is a common way to decrease the environmental impact of several products. Another option consist in using biopolymers instead. However, most of the times, the complete ... -
Analysis of innovative matrix systems for continuous fiber reinforced plastics in RTM process
(Universitat Politècnica de Catalunya / Technishe Universität Darmstadt, 2012)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Technische Universität DarmstadtThe use of lightweight and high-performance materials is nowadays one of the main challenge for the global automotive industry. Companies are forced to look for new ways to design and manufacture a commercially viable ... -
Analysis of ultra low cycle fatigue problems with the Barcelona plastic damage model
(Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2013)
Text en actes de congrés
Accés obertThis paper presents a plastic formulation based on the Barcelona plastic damage model capable of predicting the material failure due to Ultra Low Cycle Fatigue. This is achieved taking into account the fracture energy ... -
Anàlisi de la contribució a tallant dels reforços exteriors amb laminats de polímers reforçats amb fibres (FRP) en bigues de formigó armat
(Universitat Politècnica de Catalunya, 2012-07)
Tesina
Accés obert[ANGLÈS] (...) Nowadays, the existing guides and recommendations propose calculating shear capacity by adding the contribution of the concrete and the passive reinforcement. In FRP reinforced elements, existing models ... -
Análisis comparativo de propiedades termo estructurales y eléctricas entre polietileno de alta densidad (HD-PE), y el HD-DE reforzado con neumáticos al final de su vida útil. Estudio de aplicación como dieléctrico
(2022-01-01)
Article
Accés obertEl propósito del presente trabajo pasa por analizar la permitividad y el factor de pérdidas tanto del polietile-no de alta densidad (HD-PE), como del compuesto de matriz polimérica (HD-PE)reforzado con neumáticos fuera de ... -
Análisis de propiedades de recubrimientos biodegradables
(Universitat Politècnica de Catalunya, 2018-06-29)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitatEl objetivo del presente proyecto es mejorar las propiedades de barrera al vapor de agua y al agua líquida de un soporte en base papel mediante la aplicación de un novedoso recubrimiento biodegradable de ácido poliláctico. El ... -
Análisis de un componente plástico cromado en automoción mediante ensayos mecánicos y simulación por elementos finitos para la predicción del correcto montaje y desmontaje de la pieza
(Universitat Politècnica de Catalunya, 2014-06)
Treball Final de Grau
Accés restringit per decisió de l'autorEste proyecto nace con motivo de los problemas que sufrió una pieza de automoción durante el proceso de homologación de la misma y que no permitieron su lanzamiento al mercado. La pieza en cuestión consiste en un tapa-buje. ... -
Andamios temporales basados en mezclas de poliláctico-polibiguanida: material con actividad antibacteriana
(Universitat Politècnica de Catalunya, 2013-03)
Projecte/Treball Final de Carrera
Accés obertEn este estudio se ha producido mediante la técnica de electrospinning o electrohilado microfibras a partir de disoluciones de la mezcla del polímero poliláctico (PLA), y de la polibiguanida (PHMB). El interés por obtener ...