Exploració per autor "Rodríguez-Pérez, Miguel Ángel"
Ara es mostren els items 5-19 de 19
-
Effects of wet/dry-cycling and plasma treatments on the properties of flax nonwovens intended for composite reinforcing
(2016-02-03)
Article
Accés obertThis research analyzes the effects of different treatments on flax nonwoven (NW) fabrics which are intended for composite reinforcement. The treatments applied were of two different kinds: a wet/dry cycling which helps to ... -
Extrusion foaming of PHB-copolymer: effect of chain extender and cooling system on the cellular structure and properties
(2015)
Text en actes de congrés
Accés restringit per política de l'editorialIn this study, we analyse the extrusion foaming capabilities of polyhydroxyalkanoates (PHAs) with endothermic chemical blowing agents (CBAs) based on sodium bicarbonate and citric acid. An epoxy functionalized chain extender ... -
Foaming behavior, cellular structure and physical properties of polybenzoxazine foams
(2012-04-10)
Article
Accés restringit per política de l'editorialIn this paper, polymer foams based on a benzoxazine resin have been successfully prepared using azodicarbonamide (ADC) as a chemical blowing agent and have been characterized regarding their foaming behavior, cellular ... -
Foaming of polypropylene by using both chemical and physical blowing agents. A comparative study of the structure and physical properties
(2010)
Text en actes de congrés
Accés restringit per política de l'editorialMicrocellular foams have focused attention of researches due to improvement in some properties when compared to conventional foams. Several production routes for these materials have been developed although most of them ... -
Heat transfer in polyolefin foams
(Springer-Verlag, 2011)
Capítol de llibre
Accés restringit per acord de confidencialitatThis chapter is dedicated to the study of heat transfer in polyolefin-based foams, particularly thermal conductivity, as a function of their structure and chemical composition. A small review of the main experimental ... -
Heat transfer in polypropylene-based foams produced using different foaming processes
(Wiley, 2009-10)
Article
Accés restringit per política de l'editorialThis paper presents the characterization of the cellular structure and thermal conduction behaviour of polypropylene foams produced using different foaming processes, with the aim of selecting the best possible PP foam ... -
Heat Transfer of Mineral-Filled Polypropylene Foams
(Trans Tech Publications, 2010)
Article
Accés restringit per política de l'editorialThe thermal conductivity of unfilled polypropylene foams produced using different foaming processes has previously been demonstrated to be mainly affected by the foam’s bulk density [1]. The influence of adding inorganic ... -
Moulded polypropylene foams produced using chemical or physical blowing agents: structure–properties relationship
(2012)
Article
Accés restringit per política de l'editorialPolypropylene (PP) foams have become essential items due to their excellent properties. Nevertheless, obtaining net-shaped PP foams with medium relative densities is a complicated issue. In this article, two processes ... -
Optical expandometry: a technique to analyze the expansion kinetics of chemically blown thermoplastic foams
(2012-07)
Article
Accés restringit per política de l'editorialA novel technique to determine in situ the free expansion kinetics of chemically foamed thermoplastic foams, so-called optical expandometry, is presented in this work. This technique is based on the camera monitoring ... -
Polypropylene/Clay Nanocomposites: Combined effects of clay treatment and compatibilizer polymers on the structure and properties
(Wiley, 2006)
Article
Accés restringit per política de l'editorialCombined effects of clay treatment and compatibilizer polymers on the structure and properties of polypropylene/clay nanocomposites were studied. Dynamic mechanical analysis was used to analyze comparatively the dynamic ... -
Study of the cellular structure-mechanical properties relation in starch-based foamed blocks reinforced with natural fillers and produced by microwave radiation
(2015)
Text en actes de congrés
Accés restringit per política de l'editorialStarch-based foamed blocks reinforced with natural fillers and with a high potential for being applied as bioderived and biodegradable shaped protective packaging were produced in this work. The use of natural fillers as ... -
The effect of anionic clay particles on the structure and thermomechanical behavior of sodium partially-neutralized EMAA ionomer
(2010-06-20)
Article
Accés obertNanocomposites based on a sodium partially-neutralized ionomer of poly (ethylene-comethacrylic acid) (EMAA) and MgAl layered double hydroxide (LDH) particles with and without organic modification were prepared from a melt ... -
The influence fiber treatment on the mechanical properties of biocomposites reinforced with flax nonwovens
(2015)
Comunicació de congrés
Accés restringit per política de l'editorial -
Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO2 dissolution
(2012-09)
Article
Accés restringit per política de l'editorialDifferent relative density polypropylene foams were prepared by means of two foaming processes: chemical foaming by compression moulding and physical foaming by high pressure CO2 dissolution. By controlling the foaming ... -
Thermal Conductivity of Carbon Nanofibre-Polypropylene Composite Foams
(Trans Tech Publications, 2010)
Article
Accés restringit per política de l'editorialCarbon nanofibre-reinforced polypropylene nanocomposites containing from 5 to 20 wt.% of carbon nanofibres and a chemical blowing agent were melt-compounded and later foamed using compression-moulding. Alongside their ...
