Exploració per autor "Mejía, Ignacio"
Ara es mostren els items 7-12 de 12
-
Hot ductility behavior of a low carbon advanced high strength steel (AHSS) microalloyed with boron
Mejía, Ignacio; Bedolla Jacuinde, Arnoldo; Maldonado, Cuauhtémoc; Cabrera Marrero, José M. (2011-05-24)
Article
Accés restringit per política de l'editorialThe current study analyses the influence of boron addition on the hot ductility of a low carbon advanced high strength NiCrVCu steel. For this purpose hot tensile tests were carried out at different temperatures (650, ... -
Hot ductility behavior of high-Mn austenitic Fe-22Mn-1.5Al-1.5Si-0.45C TWIP steels microalloyed with Ti and V
Salas-Reyes, A. E.; Mejía, Ignacio; Bedolla Jacuinde, Arnoldo; Boulaajaj, Ahmed; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2014-07)
Article
Accés restringit per política de l'editorialThis research work studies the influence of microalloying elements (Ti and V) and the solidification route on the hot ductility behavior of high-manganese TWIP steels. Uniaxial hot tensile tests in the temperature range ... -
Influence of Nb microaddition on microstructure and texture evolution in a Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel under uniaxial hot-tensile conditions
Salas Reyes, Antonio Enrique; Mejía, Ignacio; Cabrera Marrero, José M. (Cambridge University Press, 2017-11)
Article
Accés obertAdvanced high-strength steels as Twinning Induced Plasticity (TWIP) steels have been developed using microalloying elements and subsequent thermo-mechanical processing techniques. Moreover, under hot-working conditions, ... -
Modeling of the hot deformation behavior of boron microalloyed steels under uniaxial hot-compression conditions
Mejía, Ignacio; López Chipres, Edgar; Maldonado, Cuauhtémoc; Bedolla Jacuinde, Arnoldo; Cabrera Marrero, José M. (2008)
Article
Accés restringit per política de l'editorial -
Modeling of the hot flow behavior of advanced ultra-high strength steels (A-UHSS) microalloyed with boron
Mejía, Ignacio; Altamirano, G.; Bedolla Jacuinde, Arnoldo; Cabrera Marrero, José M. (2014-07)
Article
Accés restringit per política de l'editorialIn this research work, modeling of the hot flow behavior was carried out in a low carbon advanced ultra-high strength steels (A-UHSS) microalloyed with different amounts of boron (14, 33, 82, 126 and 214 ppm). For this ... -
Modeling the hot flow behavior of a Fe-22Mn-0.41C-1.6Al-1.4Si TWIP steel microalloyed with Ti, V and Nb
Mejía, Ignacio; Reyes, Francisco; Cabrera Marrero, José M. (2015-09-17)
Article
Accés obertThe present research work analyses the influence of Ti, V and Nb microalloying elements on the hot flow behavior of a high-Mn Twinning Induced Plasticity (TWIP) steel. For this purpose, flow curves were obtained by uniaxial ...