Exploració per autor "Bonada Bo, Jordi"
Ara es mostren els items 36-42 de 42
-
Reinforced photocurable materials for an Additive Manufacturing process based on Mask Image Projection
(2020-03-09)
Article
Accés obertMask Image Projection based on Stereolithography (MIP-SL) is an Additive Manufacturing (AM) system which it is based on a Frontal Photopolymerization Process (FPP) to manufacture parts made of photocurable materials. In ... -
Residual stresses and initial imperfections in non-linear analysis
(2013-01)
Article
Accés restringit per política de l'editorialWhen non-linear finite element analysis (FEA) of cold-formed thin-walled steel sections subject to compression is carried out, an initial perturbation must be introduced in the model in order to trigger the failure due ... -
Seismic pushover analysis of unbraced adjustable pallet racks in the down-aisle direction. Need for multimode analysis
(2023-12)
Article
Accés restringit per política de l'editorialModal Pushover Analysis has been proposed to account for the higher modes contribution in seismic analysis of slender structures, such as unbraced racks in the down-aisle direction. In these structures, only single-mode ... -
Selection of the initial geometrical imperfection in nonlinear FE analysis of cold-formed steel rack columns
(2011-11-05)
Article
Accés restringit per política de l'editorialThis paper presents three methodologies to predict the load carrying capacity of cold formed steel rack columns via nonlinear finite element analysis (FEA). The column lengths are chosen in the range where the main failure ... -
Simulation of the Roll-Forming Process for the Determination of the Relevant Residual Stresses of Cold-Formed Steel Members
(LABEIN, 2009-10-14)
Text en actes de congrés
Accés obertThe uprights for pallet rack systems are usually thin-walled open cold-formed steel sections. Their behaviour under compression can be analysed experimentally, analytically or by finite element simulation. In the ... -
State-of-the-art review on adjustable pallet racks testing for seismic design
(2022-12)
Article
Accés obertThis paper presents a state-of-the-art review on seismic tests of adjustable pallet rack systems: on particular components of racks, subassemblies, full racks and stored goods. The tested particular components are the most ... -
Structural analysis of rack upright frames under a pure compression load by means of a nonlinear Generalized Beam Theory analysis
(2023-09)
Article
Accés restringit per política de l'editorialRack uprights are commonly mono-symmetric open thin-walled members with regular perforations along their length. These perforations are used to enable the connection with Rack upright frames of conventional pallet racking ...
