Exploració per autor "Gómez Gras, Giovanni"
Ara es mostren els items 9-28 de 34
-
Development, characterization and test of an ultrasonic vibration-assisted ball burnishing tool
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Gómez Gras, Giovanni; Llumà Fuentes, Jordi (2018-03-01)
Article
Accés obertThis paper presents the design and characterization of an ultrasonic vibration-assisted ball burnishing (VABB) tool on Ti-6Al-4V. This process is based on the modification of conventional ball burnishing, by means of the ... -
Efectos del bruñido con bola acustoplástico sobre la integridad superficial de Ti6Al4V
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Gómez Gras, Giovanni; Llumà Fuentes, Jordi (2018)
Text en actes de congrés
Accés obert -
Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens
Travieso Rodríguez, José Antonio; Gómez Gras, Giovanni; Dessein, Gilles; Carrillo, F J.; Alexis, Joël; Jorba Peiró, Jordi; Aubazac, Nathalie (2015-11-20)
Article
Accés obertThis paper explores the effects on the surface roughness, hardness and residual stress of G10380 steel specimens milled and treated with a ball-burnishing process assisted by vibrations. These vibrations are incorporated ... -
Estudio comparativo del comportamiento térmico de diferentes disipadores de calor para impresoras 3D a través de MEF
Jerez Mesa, Ramón; Gómez Gras, Giovanni; Plana García, Victoria; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi (2016)
Text en actes de congrés
Accés obertLas impresoras 3D de código abierto han experimentado una rápida expansión durante los últimos años, protagonizando una verdadera revolución a niveles doméstico y educativo, y ocupando nuevos nichos de mercado como tecnología ... -
Estudio del proceso de bruñido con bola asistido por una vibración
Gómez Gras, Giovanni (Universitat Politècnica de Catalunya, 2015-04-17)
Tesi
Accés obertThe aim of this thesis is studying and characterizing a ball burnishing process assisted with vibrations. By introducing vibrations in the overall process, results are enhanced if compared to the ones derived from a ... -
Estudio experimental del efecto de bruñido sobre la vida a fatiga de probetas de acero AISI 1038
Jerez Mesa, Ramón; Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Casadesús Farràs, Oriol; Madueño Guerrero, Manel (2016)
Text en actes de congrés
Accés obertEl bruñido es una operación de acabado por deformación plástica que se ejecuta con herramientas dotadas de elementos indentadores capaces de transmitir una fuerza controlada. Este proceso es conocido por su capacidad de ... -
Experimental characterization of the influence of lateral pass width on results of a ball burnishing operation
Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón (2015-12-25)
Article
Accés obertBall burnishing has proved to be a highly effective mechanical finishing process of industrial workpieces, because of the excellent surface roughness and fatigue performance that induces in treated workpieces. In order to ... -
Experimental study of lateral pass width in conventional and vibrations-assisted ball burnishing
Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Llumà Fuentes, Jordi; Gomis de la Calle, Bernat (2016-02-20)
Article
Accés obertBurnishing is a mechanical finishing operation performed on workpieces to enhance their surface quality through plastic deformation. One of the main issues to understand the overall process is the behavior of the elastoplastic ... -
Experimental study on the mechanical effects of the vibration-assisted ball-burnishing process
Travieso Rodríguez, José Antonio; Gómez Gras, Giovanni; Jorba Peiró, Jordi; Carrillo, F J.; Dessein, Gilles; Alexis, Joël; González Rojas, Hernán Alberto (2015-12-02)
Article
Accés obertBurnishing processes are effective methods for treating pieces to increase their durability and roughness. Studies reveal that traditional burnishing can be strongly improved with the assistance of external energy sources. ... -
Fatigue lifespan study of PLA parts obtained by additive manufacturing
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Gómez Gras, Giovanni; Puig Martínez, Daniel (2017-10-05)
Article
Accés obertCurrently, additive manufacturing (AM) is not limited to prototype manufacturing, but is also used to generate parts with final applications. This paper considers this aspect of 3D printing, and aims to characterize fatigue ... -
Fatigue lifespan study of PLA parts obtained by additive manufacturing
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Gómez Gras, Giovanni; Puig, Daniel (2017)
Comunicació de congrés
Accés obertCurrently, additive manufacturing (AM) is not limited to prototype manufacturing, but is also used to generate parts with final applications. This paper considers this aspect of 3D printing, and aims to characterize fatigue ... -
Fatigue performance of fused filament fabrication PLA specimens
Gómez Gras, Giovanni; Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi (2017-12-13)
Article
Accés obertThis paper aims to analyze the fatigue response of PLA parts manufactured through fused filament fabrication (FFF). The influence of four factors (layer height, fill density, nozzle diameter and velocity) on the fatigue ... -
Finite element analysis of the thermal behavior of a RepRap 3D printer liquefier
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Corbella, Xavier; Busqué, Raquel; Gómez Gras, Giovanni (2016-05-01)
Article
Accés obertThe aim of this paper is to analyze the performance of a RepRap 3D printer liquefier by studying its thermal behavior, focusing on the convective heat dissipation developed along the liquefier body during the 3D printing ... -
Hardening effect and fatigue behavior enhancement through ball burnishing on AISI 1038
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Gómez Gras, Giovanni; Llumà Fuentes, Jordi; Casadesús Farràs, Oriol; Madueño Guerrero, Manel (Elsevier, 2019-12-18)
Article
Accés obertThe objective of this paper is to present a comprehensive study of the effects of ball burnishing on the low cycle fatigue endurance of cylindrical specimens subjected to alternative bending stress, by constructing fatigue ... -
Impresión 3D: del laboratorio a casa. FCT-14-8666. Memoria de las actividades realizadas
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Gómez Gras, Giovanni (2015-12-02)
Report de recerca
Accés obert -
Impresión 3D: Del laboratorio a casa. Programa de divulgación científico-tecnológica sobre la tecnología de impresión 3D
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Gómez Gras, Giovanni (EUETIB, 2014-12-01)
Text en actes de congrés
Accés obertLa impresión 3D comienza a ser un fenómeno tecnológico en España, dada la gran variedad de modelos a la venta para aquellas personas emprendedoras que deseen disponer de esta tecnología en su entorno doméstico. Sin embargo, ... -
Impresión 3D: Herramienta para la creación de vocación por las carreras técnicas
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Gómez Gras, Giovanni (2021)
Comunicació de congrés
Accés obertLa finalidad de este artículo es presentar los resultados de una serie de acciones llevadas a cabo para ayudar a crear y consolidar, en un grupo de estudiantes de educación secundaria, vocación hacia las carreras de ... -
Influence of peak height prior to milling the resulting surface roughness of the ball burnishing process on convex and concave pieces of aluminum
Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto; Nápoles Alberro, Amelia (2012)
Comunicació de congrés
Accés obertMolds, counterfoils of conformation, and many other industrial pieces with important presentations, face constant the engineers with the problem of obtaining superficial qualities that minimize the friction, optimize the ... -
Influencia del proceso de bruñido con bola sobre la dureza y las tensiones residuales en el aluminio A92017
Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto; Gómez Gras, Giovanni; Nápoles Alberro, Amelia; Sánchez Egea, Antonio José (2012)
Comunicació de congrés
Accés obertEl bruñido con bola se realiza, para mejorar el acabado de las piezas que han sido mecanizadas y para obtener una superficie más dura con tensiones residuales a compresión. De este modo se obtendrá una mayor resistencia ... -
Mechanical properties of 3D-printing polylactic acid parts subjected to bending stress and fatigue testing
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Llumà Fuentes, Jordi; Traver Ramos, Oriol; Gómez Gras, Giovanni; Roa Rovira, Joan Josep (Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-22)
Article
Accés obertThis paper aims to analyse the mechanical properties response of polylactic acid (PLA) parts manufactured through fused filament fabrication. The influence of six manufacturing factors (layer height, filament width, fill ...