Exploració per autor "Carrasco Alonso, Félix Ángel"
Ara es mostren els items 12-24 de 24
-
Kinetics of the thermal decomposition of processed poly(lactic acid)
(2010-12)
Article
Accés restringit per política de l'editorialThe kinetics of the thermal decomposition of processed poly(lactic acid) has been studied and compared to that of raw material. Processing consisted of two different industrial processes: 1) Injection (with or without ... -
PLA-OMMT Nanocomposites manufactured by reactive extrusion
(IAPC Publishing, 2017-05-03)
Capítol de llibre
Accés obert -
PLA/BIOPA bioblends for FDM: Mechanica and fracture behavior
(2020)
Comunicació de congrés
Accés obertThe fracture behaviour of PLA/PA bioblends has been investigated in order to extend its processing through fused deposition modeling printing by pellets supply (FDM-p). The viability of the processing technique in creating ... -
PLA/PA bio-blends: induced morphology by extrusion
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-12-19)
Article
Accés obertThe effect of processing conditions on the final morphology of Poly(Lactic Acid) (PLA) with bio-based Polyamide 10.10 (PA) 70/30 blends is analyzed in this paper. Two types of PLA were used: Commercial (neat PLA) and a ... -
PLA/SiO2 composites: influence of the filler modifications on the morphology, crystallization behaviour and mechanical properties
(Wiley, 2017-06-14)
Article
Accés obertFilms of an architecturally modified poly(lactic acid) (PLAREx) with three different types of fumed silica nanofillers (SiO2) were processed through reactive extrusion-calendering in a pilot plant. The effects of the SiO2 ... -
Poly(lactic acid) and acrylonitrile-butadiene-styrene blends: influence of adding ABS-g-MAH compatibilizer on the kinetics of the thermal degradation
(Elsevier, 2018-05)
Article
Accés obertSquare plates (nominal thickness: 3 mm, nominal width: 100 mm) of different rheologically modified PLA/ABS blends were manufactured through injection molding, with or without adding ABS grafted with maleic anhydride (MAH). ... -
Processing of poly (lactic acid) (PLA) and PLA / montmotillonite nanocomposites in a pilot plant: a study of structural changes and thermal stability
(2010-03)
Article
Accés restringit per política de l'editorialSe aplican procesos de transformación y tratamiento de termoplásticos (inyección, extrusión-inyección y recocido) al àcido poliláctico (PLA) y a determinados nanocompuestos PLA/montmorillonita, con objeto de estudiar las ... -
Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties
(2010-02)
Article
Accés restringit per política de l'editorialThe processing of poly(lactic acid) (injection and extrusion/injection) as well as annealing of processed materials were studied in order to analyze the variation of its chemical structure, thermal degradation and ... -
Sheets of branched poly(lactic acid) obtained by one step reactive extrusion calendering process: Physical Aging and Fracture Behaviour
(Springer, 2014-03-13)
Article
Accés restringit per política de l'editorial -
Sheets of branched poly(lactic acid) obtained by one-step reactive extrusion-calendering process: physical aging and fracture behavior
(2014-06-01)
Article
Accés restringit per política de l'editorialThe architectural modifications of a linear poly(D,L-Lactide) acid (PD,L-LA) commercial grade were induced by a one-step reactive extrusion-calendering process using a styrene-glycidyl acrylate copolymer as reactive agent. ... -
Sheets of poly(lactide)/o-MMT prepared by one-step reactive extrusion-calendering process
(Universidad de Sevilla. Grupo de Elasticidad y Resistencia de Materiales, 2014)
Text en actes de congrés
Accés obertIn this study, a reactive extrusion-calendering process was used in order to manufacture OMMT-based (2.5 wt.%) PLA-REX sheets with a nominal thickness of 1 mm. During processing, the properties of the melt were stabilized ... -
Thermal degradation of poly(lactic acid) and acrylonitrile-butadiene-styrene bioblends: Elucidation of reaction mechanisms
(2017-05-15)
Article
Accés obertSquare plates (nominal tickness: 3 mm, nominal width: 100 mm) of diferent rheolgically modified PLA/acrylonitrile-butadiene-styrene (ABS) blends were manufactured through injection molding process. During processing, the ... -
Using viscoelastic properties to quantitatively estimate the amount of modified poly(Lactic Acid) chains through reactive extrusion
(2015-05-12)
Article
Accés obertIn this study the dynamic viscoelastic properties of three structurally modified poly(lactic acid) (PLA) samples processed through reactive extrusion were analyzed. While classical chromatographic and spectroscopic techniques ...
