Exploració per autor "Travieso Rodríguez, José Antonio"
Ara es mostren els items 52-71 de 92
-
Impact of printing orientation on inter and intra-layer bonds in 3D printed thermoplastic elastomers: a study using acoustic emission and tensile tests
Adrover Monserrat, Bàrbara; García Vilana, Silvia; Sánchez Molina, David; Llumà Fuentes, Jordi; Jerez Mesa, Ramón; Martínez González, Eva; Travieso Rodríguez, José Antonio (Elsevier, 2023-09-22)
Article
Accés obertThe use of the Material Extrusion technique with Thermoplastic Elastomers is currently growing because of the large number of benefits of this family of materials. They are processable materials with high flexibility, which ... -
Impact of printing orientation on inter and intra-layer bonds in 3D printed thermoplastic elastomers: A study using acoustic emission and tensile tests
Adrover Monserrat, Bàrbara; García Vilana, Silvia; Sánchez Molina, David; Llumà Fuentes, Jordi; Jerez Mesa, Ramón; Martínez González, Eva; Travieso Rodríguez, José Antonio (Elsevier, 2023-09)
Article
Accés obertThe use of the Material Extrusion technique with Thermoplastic Elastomers is currently growing because of the large number of benefits of this family of materials. They are processable materials with high flexibility, which ... -
Impacts of surface texture and nature of friction on energy-force efficiency of surface plastic deformation during burnishing
Bobrovskij, Igor; Bobrovskij, Nikolaj; Khaimovich, Alexander; Travieso Rodríguez, José Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2022-09-21)
Article
Accés obertBurnishing, the plastic deformation of the workpiece surface due to sliding contact with a tool called burnisher, is a finishing operation widely used in various industries. In this work, impacts of the initial surface ... -
Impresión 3D: del laboratorio a casa. FCT-14-8666. Memoria de las actividades realizadas
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Gómez Gras, Giovanni (2015-12-02)
Report de recerca
Accés obert -
Impresión 3D: Del laboratorio a casa. Programa de divulgación científico-tecnológica sobre la tecnología de impresión 3D
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Gómez Gras, Giovanni (EUETIB, 2014-12-01)
Text en actes de congrés
Accés obertLa impresión 3D comienza a ser un fenómeno tecnológico en España, dada la gran variedad de modelos a la venta para aquellas personas emprendedoras que deseen disponer de esta tecnología en su entorno doméstico. Sin embargo, ... -
Impresión 3D: Herramienta para la creación de vocación por las carreras técnicas
Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Gómez Gras, Giovanni (2021)
Comunicació de congrés
Accés obertLa finalidad de este artículo es presentar los resultados de una serie de acciones llevadas a cabo para ayudar a crear y consolidar, en un grupo de estudiantes de educación secundaria, vocación hacia las carreras de ... -
Influence of building orientation on the flexural strength of laminated object manufacturing specimens
Olivier, Djamila; Travieso Rodríguez, José Antonio; Borrós Gómez, Salvador; Reyes Pozo, Guillermo; Jerez Mesa, Ramón (Springer, 2017)
Article
Accés obertThis study aims to define the best building orientation for components produced via the Laminated object manufacturing (LOM) technique to enhance their flexural performance. Results of previous research show that components ... -
Influence of peak height prior to milling the resulting surface roughness of the ball burnishing process on convex and concave pieces of aluminum
Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto; Nápoles Alberro, Amelia (2012)
Comunicació de congrés
Accés obertMolds, counterfoils of conformation, and many other industrial pieces with important presentations, face constant the engineers with the problem of obtaining superficial qualities that minimize the friction, optimize the ... -
Influence of the brushing process on the roughness of inclined surfaces of pieces manufactured in X40CrMoV5
Rue Mascarell, Jaume; Velázquez Corral, Eric; Marqués Salvador, Jordi-Adalbert; Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón (2022-03-01)
Article
Accés obertThe purpose of the burnishing process is to achieve a good surface finish, improve mechanical properties and increase the useful life of parts with different geometries. This paper analyzes the effect of this process on ... -
Influence of the stainless-steel microstructure on tribological behavior and surface integrity after ball burnishing
Torres Chamorro, Lisbeth Alejandra; Cuadrado Lafoz, Núria; Llumà Fuentes, Jordi; Vilaseca, Montse; Travieso Rodríguez, José Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2022-12-10)
Article
Accés obertBurnishing is a plastic deformation process that reduces roughness while increasing hardness by introducing compressive residual stresses near the surface zone. These improvements will depend mainly on two fundamental ... -
Influencia del proceso de bruñido con bola sobre la dureza y las tensiones residuales en el aluminio A92017
Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto; Gómez Gras, Giovanni; Nápoles Alberro, Amelia; Sánchez Egea, Antonio José (2012)
Comunicació de congrés
Accés obertEl bruñido con bola se realiza, para mejorar el acabado de las piezas que han sido mecanizadas y para obtener una superficie más dura con tensiones residuales a compresión. De este modo se obtendrá una mayor resistencia ... -
Influencia del proceso de bruñido en las propiedades superficiales de piezas inclinadas fabricadas con X40CrMoV5
Rue Mascarell, Jaume; Velázquez Corral, Eric; Marqués Salvador, Jordi-Adalbert; Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón (2021)
Text en actes de congrés
Accés obertEl proceso de bruñido tiene como finalidad lograr un buen acabado superficial, mejorar las propiedades mecánicas e incrementar la vida útil de piezas con diferentes geometrías. En este estudio se analiza qué efecto tiene ... -
Ingeniería de procesos de fabricación
Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto (2011-10-21)
Llibre
Accés obert -
Interactivo para autoaprendizaje del análisis de mecanismos
Nápoles Alberro, Amelia; Travieso Rodríguez, José Antonio (2008-09-01)
Article
Accés obertCon este informe se da a conocer la herramienta y la metodología utilizada en el aprendizaje de análisis de mecanismos, planteado en la asignatura Mecánica y Teoría de Mecanismos 2 (MTM 2) impartida para la titulación de ... -
Investigation of ball burnishing process using vibration and acoustic emission sensors
Fernández Osete, Ismael; Velázquez Corral, Eric; Marqués Salvador, Jordi-Adalbert; Llumà Fuentes, Jordi; Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio (Institute of Physics (IOP), 2021-10-01)
Article
Accés obertIn this paper, a ball burnishing tool mounted in a CNC lathe is characterized. This tool may work as vibration assisted ball-burnishing tool and in conventional way. The characterization consists of acoustic emission ... -
Manufacturing and application of 3D printed photo fenton reactors for wastewater treatment
Nasr Esfahani, Kourosh; Zandi, Mohammad Damous; Travieso Rodríguez, José Antonio; Graells Sobré, Moisès; Pérez Moya, Montserrat (2021-05-04)
Article
Accés obertAdditive manufacturing (AM) or 3D printing offers a new paradigm for designing and developing chemical reactors, in particular, prototypes. The use of 3D printers has been increasing, their performance has been improving, ... -
Manufacturing and application of raceway ponds for wastewater treatment
Nasr Esfahani, Kourosh; Zandi, Mohammad Damous; Travieso Rodríguez, José Antonio; Graells Sobré, Moisès; Pérez Moya, Montserrat (2019)
Comunicació de congrés
Accés obert -
Mechanical characterization of thermoplastic elastomers based on olefin processed through material extrusion
Adrover Monserrat, Bàrbara; Llumà Fuentes, Jordi; Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio (Springer Nature, 2023-05-12)
Article
Accés obertThermoplastic elastomeric materials are processable through 3D printing. These materials demonstrate excellent mechanical properties, along with good flexibility. A better understanding of the creation of bonds between the ... -
Mechanical properties of 3D-printing polylactic acid parts subjected to bending stress and fatigue testing
Travieso Rodríguez, José Antonio; Jerez Mesa, Ramón; Llumà Fuentes, Jordi; Traver Ramos, Oriol; Gómez Gras, Giovanni; Roa Rovira, Joan Josep (Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-22)
Article
Accés obertThis paper aims to analyse the mechanical properties response of polylactic acid (PLA) parts manufactured through fused filament fabrication. The influence of six manufacturing factors (layer height, filament width, fill ... -
Mechanical strengthening in S235JR steel sheets through vibration-assisted ball burnishing
Llumà Fuentes, Jordi; Gómez Gras, Giovanni; Jerez Mesa, Ramón; Rue Mascarell, Jaume; Travieso Rodríguez, José Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2020-07-28)
Article
Accés obertThe superficial effect of hardening caused after vibration-assisted ball burnishing and its consequences in the tensile behavior of a carbon steel material are studied in this paper. As ball burnishing affects the material ...