Exploració per autor "Fernández Francos, Xavier"
Ara es mostren els items 6-25 de 115
-
Biobased imine vitrimers obtained by photo and thermal curing procedures-promising materials for 3D printing
Vilanova Pérez, Anna; De la Flor López, Silvia; Fernández Francos, Xavier; Serra Albet, Maria Àngels; Roig Gibert, Adriá (American Chemical Society (ACS), 2024-03-14)
Article
Accés obertImine-based vitrimers were prepared from synthesized diimine-dimethacrylate monomer derived from biobased vanillin. First, a methacrylate derivative starting from vanillin was synthesized. The diimine derivative was ... -
Characterization of sequential dual-curing of thiol-acrylate-epoxy systems with controlled thermal properties
Russo, Claudio; Serra Albet, Maria Àngels; Fernández Francos, Xavier; Flor López, Sílvia de la (Elsevier, 2019-03-01)
Article
Accés obertIn this work, a novel sequential dual-curing system based on thiol-acrylate-epoxy formulations is developed and characterized. Both reaction stages are thermally activated and sequentially relies on difference in the ... -
Click-based dual-curing thermosets and their applications
Ramis Juan, Xavier; Fernández Francos, Xavier; Flor López, Sílvia de la; Ferrando Piera, Francesc; Serra Albet, Maria Àngels (Elsevier, 2018)
Capítol de llibre
Accés restringit per política de l'editorialDual curing is the methodology for obtaining thermosets by combining two different and compatible polymerization reactions, taking place sequentially or simultaneously. Sequential dual-curing processing enables the preparation ... -
Comparative analysis of stochastic network build-up methods for the curing of epoxy-anhydride thermosets
Fernández Francos, Xavier; Serra Albet, Maria Àngels; Ramis Juan, Xavier (2014-04-01)
Article
Accés restringit per política de l'editorialThe network build-up of epoxy-anhydride thermosets has been studied using two different stochastic network build-up methods based on the random combination of primary chains or simple fragments. Explicit expressions for ... -
Comparative curing kinetics and thermal–mechanical properties of DGEBA thermosets cured with a hyperbranched poly(ethyleneimine) and an aliphatic triamine
Santiago, David; Fernández Francos, Xavier; Ramis Juan, Xavier; Salla Tarragó, José María; Sangermano, Marco (2011-11-10)
Article
Accés restringit per política de l'editorialThe use of commercially available hyperbranched poly(ethyleneimine)s (Hbpei, LupasolTM, BASF) as curing agent of DGEBA has been studied. HBpei can react with epoxy monomers by an epoxy-amine condensation mechanism and get ... -
Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR)
Fabregat Sanjuan, Albert; Fernández Francos, Xavier; Ferrando Piera, Francesc (Wiley, 2021-01-01)
Article
Accés obertControl of curing rate and exothermicity during processing of thermosetting composite materials is essential in order to minimize the formation of internal stresses leading to mechanical and dimensional defects in the ... -
Corrigendum: Network structure and thermomechanical properties of hybrid DGEBA networks cured with 1-methylimidazole and hyperbranched poly(ethyleneimine)s
Fernández Francos, Xavier; Santiago, David; Ferrando Piera, Francesc; Ramis Juan, Xavier; Salla Tarragó, José María; Serra Albet, Maria Àngels; Sangermano, Marco (2013-01-25)
Article
Accés restringit per política de l'editorial -
Cost-effectively 3d-printed rigid and versatile interpenetrating polymer networks
Konuray, Ali Osman; Bonada Bo, Jordi; Tercjak, Agnieszka; Fabregat Sanjuan, Albert; Fernández Francos, Xavier; Ramis Juan, Xavier (Multidisciplinary Digital Publishing Institute (MDPI), 2021-08-02)
Article
Accés obertVersatile acrylate–epoxy hybrid formulations are becoming widespread in photo/thermal dual-processing scenarios, especially in 3D printing applications. Usually, parts are printed in a stereolithography or digital light ... -
Critical analysis of the thermal stability of transesterification vitrimers for 3D-printing applications based on digital light processing
Romano, Angelo; Konuray, Ali Osman; Román Concha, Frida Rosario; Calventus Solé, Yolanda; Fernández Francos, Xavier; Roppolo, Ignazio; Sangermano, Marco (2023-11-17)
Article
Accés obert3D-printable vitrimers processed by digital light processing (DLP) have been recently developed, based on the transesterification reaction of ß-hydroxyester structures from mono- and diacrylate monomers employed in the ... -
Crosslinking of mixtures of DGEBA with 1,6-Dioxaspiro[4,4]nonan-2,7-dione initiated by tertiary amines. I. Study of the reaction and kinetic analysis
Fernández Francos, Xavier; Salla Tarragó, José María; Mantecón, Ana; Serra Albet, Maria Àngels; Ramis Juan, Xavier (2008-08)
Article
Accés restringit per política de l'editorialThe anionic copolymerization of a Diglycidyl ether of bisphenol A (DGEBA) epoxy resin and a bislactone has been studied with different initiators. The kinetics of the process has been dealt with in detail, and it has ... -
Crosslinking of mixtures of DGEBA with 1,6-dioxaspiro[4,4]nonan-2,7-dione initiated by tertiary amines. Part IV. Effect of hydroxyl groups on initiation and curing kinetics
Fernández Francos, Xavier; Cook, Wayne D.; Serra Albet, Maria Àngels; Ramis Juan, Xavier; Liang, Genhai G.; Salla Tarragó, José María (Elsevier, 2010-01-06)
Article
Accés restringit per política de l'editorialThe anionic homopolymerization of DGEBA epoxy resin and its anionic copolymerization with a bislactone was studied using two alternative tertiary amines, 1-methylimidazole (1MI) and dimethylaminopyridine (DMAP) as initiators. ... -
Crosslinking of mixtures of diglycidylether of bisphenol-A with 1,6-dioxaspiro[4.4] nonan-2,7-dione initiated by tertiary amines: III. Effect of hydroxyl groups on network formation
Fernández Francos, Xavier; Cook, Wayne D.; Salla Tarragó, José María; Serra Albet, Maria Àngels; Ramis Juan, Xavier (2009-12)
Article
Accés restringit per política de l'editorial -
Curado “Click” secuencial de mezclas tiol-acetoacetato-acrilato, catalizada por una fotobase latente
Ramis Juan, Xavier; Konuray, Ali Osman; Liendo Castillo, Freddy Jesus; Fernández Francos, Xavier; Morancho Llena, José María; Salla Tarragó, José María; Serra Albet, Maria Àngels (2016)
Comunicació de congrés
Accés restringit per política de l'editorial -
Curat tèrmic i fotocurat de resines epoxi per al control químic de la contracció i millora de la degradabilitat
Fernández Francos, Xavier (Universitat Politècnica de Catalunya, 2009-07-10)
Tesi
Accés obertS’ha estudiat la copolimerització de resines epoxi amb una spirobislactona com a comonòmer per tal de controlar la contracció química durant el curat i millorar la seva degradabilitat per tal d’afavorir la seva recuperació ... -
Cure kinetics modeling and thermomechanical properties of cycloaliphatic epoxy-anhydride thermosets modified with hyperstar polymers
Belmonte, Alberto; Daebritz, Frank; Ramis Juan, Xavier; Serra Albet, Maria Àngels; Void, Brigitte; Fernández Francos, Xavier (2014-09-15)
Article
Accés restringit per política de l'editorialHyperstar polymers (HSPs) with hyperbranched aromatic polyester core and arms consisting of block copolymers of poly(methyl methacrylate) and poly(hydroxyethyl methacrylate) have been used as polymeric modifiers in ... -
Curing and thermomechanical properties of off-stoichiometric anhydride-epoxy thermosets
Morancho Llena, José María; Ramis Juan, Xavier; Fernández Francos, Xavier; Salla Tarragó, José María; Konuray, Ali Osman; Serra Albet, Maria Àngels (Springer, 2019-11)
Article
Accés obertn the present work, we report the preparation and characterization of a new family of thermosets based on off-stoichiometric anhydride–epoxy formulations in the presence of an anionic initiator. Diglycidyl ether of bisphenol ... -
Curing kinetics and characterization of dual-curable thiol-acrylate-epoxy thermosets with latent reactivity
Konuray, Ali Osman; Fernández Francos, Xavier; Ramis Juan, Xavier (2018-01)
Article
Accés obertA new dual-curing scheme was developed for thiol-acrylate-epoxy mixtures. A photo-initiated latent catalytic system was used to carry out thiol-acrylate Michael addition at 35 °C (Stage 1) followed by thiol-epoxy click ... -
Curing kinetics of acrylate-based and 3D printable IPNs
Konuray, Ali Osman; Salla Tarragó, José María; Morancho Llena, José María; Fernández Francos, Xavier; García Álvarez, Montserrat; Ramis Juan, Xavier (2020-10-01)
Article
Accés obertIn this work, the kinetics of curing of a new family of interpenetrating polymer networks (IPNs) obtained by co-formulation of a photocurable acrylic resin with a thermocurable epoxy/anhydride mixture is studied. The first ... -
Curing kinetics of dually-processed acrylate-epoxy 3D printing resins
Konuray, Ali Osman; Morancho Llena, José María; Fernández Francos, Xavier; García Álvarez, Montserrat; Ramis Juan, Xavier (2021-07-01)
Article
Accés obertIn this work, the curing kinetics of a new ternary acrylate/epoxy/anhydride thermoset system which is used for dual-curing 3D-printing applications is studied. The first curing stage is an acrylate free-radical photopolymerization ... -
Curing of off-stoichiometric amine–epoxy thermosets
Morancho Llena, José María; Ramis Juan, Xavier; Fernández Francos, Xavier; Salla Tarragó, José María; Konuray, Ali Osman; Serra Albet, Maria Àngels (Springer, 2018-07)
Article
Accés obertThe kinetics of the epoxy–amine polycondensation and the epoxy homopolymerization in off-stoichiometric epoxy/amine formulations with excess of epoxy groups, and in the presence of an anionic initiator have been investigated. ...