Exploració per autor "Calvo Muñoz, Jessica"
Ara es mostren els items 9-28 de 51
-
Design of microalloyed steel hot rolling schedule by torsion testing: average schedule vs. real schedule
Calvo Muñoz, Jessica; Collins, Laurie; Yue, S. (2010)
Article
Accés restringit per política de l'editorialThe hot torsion simulator has been extensively used as a means to understand the microstructure evolution of different steel grades during hot rolling. The test is suitable to simulate ‘real’ industrial schedules as well ... -
Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
Azarbarmas, M.; Aghaie-Khafri, M.; Cabrera Marrero, José M.; Calvo Muñoz, Jessica (2016-12-15)
Article
Accés obertThe hot deformation behavior of an IN718 superalloy was studied by isothermal compression tests under the deformation temperature range of 950–1100 °C and strain rate range of 0.001–1 s-1 up to true strains of 0.05, 0.2, ... -
Efecto de los elementos residuales e impurezas en la ductilidad y mecanismos de fragilización en caliente de un acero de construcción 0.23C-0.9Mn-0.13SI
Calvo Muñoz, Jessica (Universitat Politècnica de Catalunya, 2006-03-23)
Tesi
Accés obertEl agrietamiento transversal en la superficie de los productos de colada continua es un problema que sigue provocando el rechazo de algunos de estos productos con las correspondientes pérdidas energéticas y económicas. A ... -
Effect of ECAP processing temperature on an austenitic TWIP steel's microstructure, texture and mechanical properties
Lima, Marcos Natan da Silva; Filgueiras Rodrigues, Samuel; Al-Maharbi, Majid; Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Ferreira Gomes de abreu, Hamilton (Elsevier, 2023-05-01)
Article
Accés obertThe development of microstructure and texture of twinning-induced plasticity (TWIP) steel sheet during ECAP at two temperatures (250° and 350°) up to four passes were investigated. The high chromium content is the differential ... -
Effect of Manganese during the stabilization of austenite in Quench and Partitioning (Q&P) Steels
Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2019)
Text en actes de congrés
Accés obertNowadays, automobile emissions are one of the leading causes of air contamination. In this regard, the weight reduction of the vehicles structures and parts is vital, while the passenger’s safety is the first issue. ... -
Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel
Mejía, Ignacio; Salas Reyes, A.E.; Bedolla Jacuinde, Arnoldo; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2014-10-20)
Article
Accés restringit per política de l'editorialThis research work studies the influence of single microalloying elements (Nb and Mo) and the solidification route on the hot ductility behavior of a high-manganese austenitic Twinning Induced Plasticity (TWIP) steel. For ... -
Effect of sandblasting on low and high-cycle fatigue behaviour after mechanical cutting of a twinning-induced plasticity steel
Lara, Antoni; Roca Puigvert, Mercè; Parareda, Sergi; Cuadrado Lafoz, Nuria; Calvo Muñoz, Jessica; Casellas Padró, Daniel (2018)
Text en actes de congrés
Accés obertIn the last years, car bodies are increasingly made with new advanced high-strength steels, for both lightweighting and safety purposes. Among these new steels, high-manganese or TWIP steels exhibit a promising combination ... -
Effect of the testing conditions on the hot ductility and fracture mechanisms of a C-Mn steel
Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Rezaeian, A.; Yue, S. (2006)
Article
Accés obert -
Effect of Ti and B microadditions on the hot ductility behavior of a high-Mn austenitic Fe-23Mn-1.5Al-1.3Si-0.5C TWIP steel
Mejía, Ignacio; Salas Reyes, A.E.; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2015-11)
Article
Accés obertThis research work studies the effect of combined Ti and B microadditions and the solidification route on the hot ductility behavior of a high-Mn austenitic Twinning Induced Plasticity (TWIP) steel. For this purpose, ... -
Effect of V on Hot Deformation Characteristics of TWIP Steels
Reyes, Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Mejía, Ignacio (2012-04)
Article
Accés restringit per política de l'editorialTwinning induced plasticity (TWIP) steels, which rely on high Mn contents to promote twinning as the deformation mechanism, exhibit high ultimate strengths together with outstanding combinations of ultimate strength and ... -
Equal channel angular pressing of a TWIP steel: microstructure and mechanical response
Wang, Lixin; Benito Páramo, José Antonio; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (Springer, 2017-06-01)
Article
Accés obertA Fe–20.1Mn–1.23Si–1.72Al–0.5C TWIP steel with ultrafine grain structure was successfully processed through equal channel angular pressing (ECAP) at warm temperature up to four passes following the BC route. The microstructure ... -
Fracture resistance of advanced high-strength steel sheets for automotive applications
Frómeta Gutiérrez, David; Lara, Antoni; Grifé, Laura; Dieudonné, Thomas; Dietsch, Pascal; Rehrl, Johannes; Suppan, Clemens; Casellas Padró, Daniel; Calvo Muñoz, Jessica (2021-01-03)
Article
Accés obertThe fracture resistance of different advanced high strength steel (AHSS) sheets for automotive applications is investigated through conventional tensile tests, fracture toughness measurements and hole expansion tests. ... -
Heat treatment design for a QP steel: effect of partitioning temperature
Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (Multidisciplinary Digital Publishing Institute (MDPI), 2021-07-19)
Article
Accés obertDesigning a new family of advanced high-strength steels (AHSSs) to develop automotive parts that cover early industry needs is the aim of many investigations. One of the candidates in the 3rd family of AHSS are the quenching ... -
High-temperature deformation behavior of 718PLUs: Consideration of y' effects
Ozturk, Utkudeniz; Cabrera Marrero, José M.; Calvo Muñoz, Jessica; Redjaïmia, Abdelkrim; Ghanbaja, Jaâfar (2020-01-16)
Article
Accés obertThe hot deformation behavior of 718Plus is modeled through a physically based hybrid dislocation density model, which includes the effects of precipitating particles. It is well known that the service performance and hot ... -
High-temperature deformation of delta-processed Inconel 718
Páramo-Kañetas, Pedro; Ozturk, Utkudeniz; Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Guerrero Mata, Martha P. (2018-05-01)
Article
Accés obert© 2017 Elsevier B.V. The hot-flow behavior of Inconel 718 subjected to delta processing (DP) was analyzed. Hot compression tests were subsequently performed at 960 °C and 1020 °C at the four different strain rates of 0.001, ... -
Hot ductility behavior of high-Mn austenitic Fe-22Mn-1.5Al-1.5Si-0.45C TWIP steels microalloyed with Ti and V
Salas-Reyes, A. E.; Mejía, Ignacio; Bedolla Jacuinde, Arnoldo; Boulaajaj, Ahmed; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2014-07)
Article
Accés restringit per política de l'editorialThis research work studies the influence of microalloying elements (Ti and V) and the solidification route on the hot ductility behavior of high-manganese TWIP steels. Uniaxial hot tensile tests in the temperature range ... -
Identification of fracture toughness parameters to understand the fracture resistance of advanced high strength sheet steels
Frómeta Gutiérrez, David; Parareda, Sergi; Lara, Antoni; Molas Busquets, Sílvia; Casellas Padró, Daniel; Jonsén, P.; Calvo Muñoz, Jessica (2020-04-15)
Article
Accés obertThe fracture toughness of four advanced high strength steel (AHSS) thin sheets is evaluated through different characterization methodologies, with the aim of identifying the most relevant toughness parameters to describe ... -
Influence of grain refinement method on mechanical behavior and texture of TWIP steels
Wang, Liang; Benito Páramo, José Antonio; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2016-08-25)
Article
Accés restringit per política de l'editorialAustenitic high-Mn (15%-30%) steels showing twinning-induced plasticity (TWIP) provide great potential in applications for structural components in the automotive industry, owing to their excellent tensile strength-ductility ... -
Influence of laser cutting on the fatigue limit of two high strenght steels
Mateo García, Antonio Manuel; Fargas Ribas, Gemma; Calvo Muñoz, Jessica; Roa Rovira, Joan Josep (2015-03-05)
Article
Accés obertLaser cutting is widely used in the metal industry, particularly when components of high strength steel sheets are produced. However, the roughness of cut edges produced by laser differs from that obtained by other methods, ... -
INFLUENCE OF LASER CUTTING ON THE FATIGUE LIMIT OF TWO HIGH STRENGTH STEELS
Mateo García, Antonio Manuel; Fargas Ribas, Gemma; Calvo Muñoz, Jessica; Roa Rovira, Joan Josep (2013)
Text en actes de congrés
Accés obertLaser cutting is widely used in the metal industry, particularly when components of high strength steels sheets are produced. On the other hand, the roughness of cut - edges produced by laser differs from that obt ained ...