Exploració per autor "Calvo Muñoz, Jessica"
Ara es mostren els items 3-22 de 51
-
Caracteristicas de la deformacion en caliente de aceros TWIP
Calvo Muñoz, Jessica; Rodríguez Calvillo, Pablo; Cabrera Marrero, José M.; Mateo García, Antonio Manuel (2012)
Text en actes de congrés
Accés obert -
Characterization of precipitation kinetics of Inconel 718 superalloy by the stress relaxation technique
Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Shu, Sheyu (2012)
Article
Accés restringit per política de l'editorialInconel 718 is a nickel-chromium-iron superalloy which presents excellent mechanical properties at high temperatures, as well as good corrosion resistance and weldability. These characteristics can be optimized with an ... -
Characterization of strain-induced precipitation in Inconel 718 superalloy
Calvo Muñoz, Jessica; Penalva, Mariluz; Cabrera Marrero, José M. (2016-06-15)
Article
Accés obert© 2016 ASM International Inconel 718 presents excellent mechanical properties at high temperatures, as well as good corrosion resistance and weldability. These properties, oriented to satisfy the design requirements of gas ... -
Classical controlled rolling of low C steels microalloyed with Ti and Mo
Calvo Muñoz, Jessica (2014-02-26)
Article
Accés obertTwo low-C steels, one microalloyed with Ti and the other with Ti and Mo were subjected to a classical controlled rolling schedule using torsion testing. The specific torsion schedules were a simulation of an industrial ... -
Comportamiento a fractura de aceros metaestables
Mateo García, Antonio Manuel; Gutierrez, D.; Lara, A.; Zapata Dederle, Ana Cristina; Rodríguez Calvillo, Pablo; Fargas Ribas, Gemma; Calvo Muñoz, Jessica; Casellas Padró, Daniel (2012)
Article
Accés obert -
Constitutive model research of a TWIP steel processed by equal channel angular pressing
Wang, Lei; Benito Páramo, José Antonio; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2017-02)
Article
Accés restringit per política de l'editorialInfluence of equal channel angular pressing (ECAP) on mechanical properties of a TWIP steel was studied, and the tensile true stress-strain curves of the steel were fitted by Ludwik, Hollomon and Swift three kinds of ... -
Design of microalloyed steel hot rolling schedule by torsion testing: average schedule vs. real schedule
Calvo Muñoz, Jessica; Collins, Laurie; Yue, S. (2010)
Article
Accés restringit per política de l'editorialThe hot torsion simulator has been extensively used as a means to understand the microstructure evolution of different steel grades during hot rolling. The test is suitable to simulate ‘real’ industrial schedules as well ... -
Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
Azarbarmas, M.; Aghaie-Khafri, M.; Cabrera Marrero, José M.; Calvo Muñoz, Jessica (2016-12-15)
Article
Accés obertThe hot deformation behavior of an IN718 superalloy was studied by isothermal compression tests under the deformation temperature range of 950–1100 °C and strain rate range of 0.001–1 s-1 up to true strains of 0.05, 0.2, ... -
Efecto de los elementos residuales e impurezas en la ductilidad y mecanismos de fragilización en caliente de un acero de construcción 0.23C-0.9Mn-0.13SI
Calvo Muñoz, Jessica (Universitat Politècnica de Catalunya, 2006-03-23)
Tesi
Accés obertEl agrietamiento transversal en la superficie de los productos de colada continua es un problema que sigue provocando el rechazo de algunos de estos productos con las correspondientes pérdidas energéticas y económicas. A ... -
Effect of ECAP processing temperature on an austenitic TWIP steel's microstructure, texture and mechanical properties
Lima, Marcos Natan da Silva; Filgueiras Rodrigues, Samuel; Al-Maharbi, Majid; Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Ferreira Gomes de abreu, Hamilton (Elsevier, 2023-05-01)
Article
Accés obertThe development of microstructure and texture of twinning-induced plasticity (TWIP) steel sheet during ECAP at two temperatures (250° and 350°) up to four passes were investigated. The high chromium content is the differential ... -
Effect of Manganese during the stabilization of austenite in Quench and Partitioning (Q&P) Steels
Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2019)
Text en actes de congrés
Accés obertNowadays, automobile emissions are one of the leading causes of air contamination. In this regard, the weight reduction of the vehicles structures and parts is vital, while the passenger’s safety is the first issue. ... -
Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel
Mejía, Ignacio; Salas Reyes, A.E.; Bedolla Jacuinde, Arnoldo; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2014-10-20)
Article
Accés restringit per política de l'editorialThis research work studies the influence of single microalloying elements (Nb and Mo) and the solidification route on the hot ductility behavior of a high-manganese austenitic Twinning Induced Plasticity (TWIP) steel. For ... -
Effect of sandblasting on low and high-cycle fatigue behaviour after mechanical cutting of a twinning-induced plasticity steel
Lara, Antoni; Roca Puigvert, Mercè; Parareda, Sergi; Cuadrado Lafoz, Nuria; Calvo Muñoz, Jessica; Casellas Padró, Daniel (2018)
Text en actes de congrés
Accés obertIn the last years, car bodies are increasingly made with new advanced high-strength steels, for both lightweighting and safety purposes. Among these new steels, high-manganese or TWIP steels exhibit a promising combination ... -
Effect of the testing conditions on the hot ductility and fracture mechanisms of a C-Mn steel
Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Rezaeian, A.; Yue, S. (2006)
Article
Accés obert -
Effect of Ti and B microadditions on the hot ductility behavior of a high-Mn austenitic Fe-23Mn-1.5Al-1.3Si-0.5C TWIP steel
Mejía, Ignacio; Salas Reyes, A.E.; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2015-11)
Article
Accés obertThis research work studies the effect of combined Ti and B microadditions and the solidification route on the hot ductility behavior of a high-Mn austenitic Twinning Induced Plasticity (TWIP) steel. For this purpose, ... -
Effect of V on Hot Deformation Characteristics of TWIP Steels
Reyes, Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M.; Mejía, Ignacio (2012-04)
Article
Accés restringit per política de l'editorialTwinning induced plasticity (TWIP) steels, which rely on high Mn contents to promote twinning as the deformation mechanism, exhibit high ultimate strengths together with outstanding combinations of ultimate strength and ... -
Equal channel angular pressing of a TWIP steel: microstructure and mechanical response
Wang, Lixin; Benito Páramo, José Antonio; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (Springer, 2017-06-01)
Article
Accés obertA Fe–20.1Mn–1.23Si–1.72Al–0.5C TWIP steel with ultrafine grain structure was successfully processed through equal channel angular pressing (ECAP) at warm temperature up to four passes following the BC route. The microstructure ... -
Fracture resistance of advanced high-strength steel sheets for automotive applications
Frómeta Gutiérrez, David; Lara, Antoni; Grifé, Laura; Dieudonné, Thomas; Dietsch, Pascal; Rehrl, Johannes; Suppan, Clemens; Casellas Padró, Daniel; Calvo Muñoz, Jessica (2021-01-03)
Article
Accés obertThe fracture resistance of different advanced high strength steel (AHSS) sheets for automotive applications is investigated through conventional tensile tests, fracture toughness measurements and hole expansion tests. ... -
Heat treatment design for a QP steel: effect of partitioning temperature
Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (Multidisciplinary Digital Publishing Institute (MDPI), 2021-07-19)
Article
Accés obertDesigning a new family of advanced high-strength steels (AHSSs) to develop automotive parts that cover early industry needs is the aim of many investigations. One of the candidates in the 3rd family of AHSS are the quenching ... -
High-temperature deformation behavior of 718PLUs: Consideration of y' effects
Ozturk, Utkudeniz; Cabrera Marrero, José M.; Calvo Muñoz, Jessica; Redjaïmia, Abdelkrim; Ghanbaja, Jaâfar (2020-01-16)
Article
Accés obertThe hot deformation behavior of 718Plus is modeled through a physically based hybrid dislocation density model, which includes the effects of precipitating particles. It is well known that the service performance and hot ...