Exploració per autor "Buj Corral, Irene"
Ara es mostren els items 49-68 de 105
-
Fabrikazio gehigarria ezinbesteko teknologia osasunean eta industrian: Euskadi eta Katalunia
Tejo Otero, Aitor; Buj Corral, Irene; Fenollosa i Artés, Felip (2020-05-18)
Article
Accés obertAzken urteetan, fabrikazio gehigarria (FG) oso azkar garatu da hainbat sektoretan: osasuna, automobilgintza, aeronautika, etab. Aipatutako lehen sektorean, aplikazio anitzetan erabili da: prototipo eta gida kirurgikoak, ... -
Foreseeing new multi-material FFF-Additive Manufacturing concepts meeting mimicking requirements with living tissues
Fenollosa i Artés, Felip; Gomà Ayats, Joan Ramon; Buj Corral, Irene; Tejo Otero, Aitor; Minguella Canela, Joaquim; Uceda Molera, Roger; Valls Esteve, Arnau; Ayats, Marta (2019)
Article
Accés obertThe development of additive manufacturing (AM) during the last years has revolutionized not only the industry, but also the medical sector. This alongside the necessity in our society and in medicine to enhance the quality ... -
Freeform reversible embedding of suspended hydrogels for the manufacturing of biomedical applications
Tejo Otero, Aitor; Colly, Arthur; Courtial, Edwin-Joffrey; Fenollosa i Artés, Felip; Buj Corral, Irene; Marquette, Cristophe A. (2020)
Comunicació de congrés
Accés restringit per política de l'editorialAdditive Manufacturing (AM) can be applied in different medical applications. Amongst all the AM technologies, DIW (Direct Ink Writing), FDM (Fused Deposition Modelling) and SLS (Selective Laser Sintering) are some of the ... -
Implementation of intelligent manufacturing algorithms in agile architectures for production: world models for systems incorporating binary and continuous variables
Minguella Canela, Joaquim; Buj Corral, Irene; Gomà Ayats, Joan Ramon (S. Ekinovic, S. Yalcin, J. Vivancos., 2014)
Comunicació de congrés
Accés obertBuilding in previous works of the authors, the present paper focuses on the extension of the Algorithms described for the specific case study of binary systems (systems in which each variable can take one out of two ... -
Improved neural models for roughness in honing processes
Sivatte Adroer, Mauricio; Llanas Parra, Francesc Xavier; Buj Corral, Irene (2016)
Text en actes de congrés
Accés obertIn the present work improved neural network models for average roughness Ra in rough honing processes are studied. Four different adaptive models were tested, which integrate previously obtained direct and indirect models. ... -
Improvement of the manufacturing process of abrasive stones for honing
Buj Corral, Irene; Vivancos Calvet, Joan (2013-03)
Article
Accés restringit per política de l'editorialIn the present work, the mixing process of different components of abrasive stones of cubic boron nitride used for rough honing was studied. Stones are made by the sintering process of abrasive grains, a metallic bond, and ... -
Indirect model for roughness in rough honing processes based on artificial neural networks
Sivatte Adroer, Mauricio; Llanas Parra, Francesc Xavier; Buj Corral, Irene; Vivancos Calvet, Joan (2016-01-01)
Article
Accés obertIn the present paper an indirect model based on neural networks is presented for modelling the rough honing process. It allows obtaining values to be set for different process variables (linear speed, tangential speed, ... -
Influence of eccentricity on roughness distributions in side milling
Buj Corral, Irene; Vivancos Calvet, Joan; González Rojas, Hernán Alberto (2016-06-01)
Article
Accés obertIn this paper, a numerical model was used based on the tool-piece geometric intersection, which enables the determination of a roughness profile as a function of feed, tool radii and tool eccentricity in side milling ... -
Influence of fused deposition modeling (FDM) parameters on surface finish of plastic parts
Buj Corral, Irene; Marco Almagro, Lluís; Rodero de Lamo, Lourdes; Domínguez Fernandez, Alejandro (2018)
Text en actes de congrés
Accés restringit per política de l'editorialIn the present paper, influence of FDM (fused deposition modeling) parameters on surface finish of printed parts is presented. Cylindrical specimens were printed in PLA (Polylactic Acid). Five variables ... -
Influence of honing parameters on the quality of the machined parts and innovations in honing processes
Sender, Piotr; Buj Corral, Irene (Multidisciplinary Digital Publishing Institute (MDPI), 2023-01-10)
Article
Accés obertThe article presents a literature review dealing with the effect of the honing parameters on the quality of the machined parts, as well as with the recent innovations in honing processes. First, an overview about the honing ... -
Influence of humectant quantity and mixing time on the quality of abrasive stones used in honing processes
Buj Corral, Irene; Vivancos Calvet, Joan; Corominas Rovira, Laura (2012)
Comunicació de congrés
Accés restringit per decisió de l'autorIn the manufacturing process of abrasive stones with cubic boron nitride (CBN) as abrasive and metallic binder, some differences were observed regarding abrasive density at different heights of the stones. If abrasive ... -
Influence of infill and nozzle diameter on porosity of FDM printed parts with rectilinear grid pattern
Buj Corral, Irene; Bagheri, Ali; Domínguez Fernandez, Alejandro; Casado López, Ramón (2019)
Article
Accés obertThe aim of the paper is to analyze the effect of nozzle diameter and infill on porosity and pore size of FDM printed specimens with rectilinear grid pattern. Two different nozzle diameters (0.2 and 0.4 mm), as well as four ... -
Influence of infill pattern on the elastic mechanical properties of Fused Filament Fabrication (FFF) parts through experimental tests and numerical analyses
Bonada Bo, Jordi; Pastor Artigues, María Magdalena; Buj Corral, Irene (Multidisciplinary Digital Publishing Institute (MDPI), 2021-09-21)
Article
Accés obertFused Filament Fabrication (FFF) is one of the most extensive additive manufacturing technologies for printing prototypes or final parts in various fields. Some printed parts need to meet structural requirements to be ... -
Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes
Buj Corral, Irene; Domínguez Fernandez, Alejandro; Durán Llucià, Ramón (Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-21)
Article
Accés obertIn the present paper, we address the influence of print orientation angle on surface roughnessobtained in lateral walls in fused deposition modelling (FDM) processes. A geometrical model isdefined that considers the shape ... -
Influence of structure support printing parameters on surface finish of PLA hemispherical cups for emulation of ceramic hip prostheses
Buj Corral, Irene; Bagheri, Ali; Domínguez Fernandez, Alejandro (Elsevier, 2018)
Comunicació de congrés
Accés obertHemispherical hip ceramic prostheses require certain degree of porosity on their external surface so as to fix them by means of osteointegration. This can be achieved with porous mesostructures. In contrast, internal surface ... -
Influence of the tool eccentricity on the surface roughnes obtained in side milling processes
Buj Corral, Irene; Vivancos Calvet, Joan; González Rojas, Hernán Alberto (2009)
Comunicació de congrés
Accés restringit per política de l'editorial -
Informe final de proyectos de I+D+I. DPI2016-80345R
Buj Corral, Irene (2020-02-26)
Report de recerca
Accés restringit per decisió de l'autor -
Leaching behaviour of magnesium phosphate cements containing high quantities of heavy metals
Buj Corral, Irene; Torras Grané, Josep; Rovira Boixaderas, Miquel; Pablo Ribas, Joan de (Elsevier, 2009-10-30)
Article
Accés restringit per política de l'editorialStabilization/solidification (S/S) is one of the most employed techniques for treating liquid wastes containing heavy metals. Magnesium potassium phosphate cements have been used in recent years as stabilizing agents with ... -
Material extrusion of 3D printed ceramics parts: Parameters, structures and challenges
Buj Corral, Irene; Tejo Otero, Aitor; Fenollosa i Artés, Felip; Uceda Molera, Roger; El Mesbahi, Jihad; El Mesbahi, Abdelilah (Scientific.Net, 2023-10-05)
Article
Accés restringit per política de l'editorialAM technologies have been developed for different applications in sectors such as aeronautics, automotive, or healthcare. Additionally, the range of materials that can be 3D printed has increased considerably since these ... -
Modeling of Surface Roughness in Honing Processes by Using Fuzzy Artificial Neural Networks
Buj Corral, Irene; Sender, Piotr; Luis Pérez, Carmelo Javier (MDPI, 2023-01-15)
Article
Accés obertHoning processes are abrasive machining processes which are commonly employed to improve the surface of manufactured parts such as hydraulic or combustion engine cylinders. These processes can be employed to obtain a ...