Exploració per autor "Llumà Fuentes, Jordi"
Ara es mostren els items 89-108 de 131
-
Optimization of nanocrystalline aluminium production using an objective function
Solà Saracibar, Joan; Llumà Fuentes, Jordi; Jorba Peiró, Jordi (2010)
Text en actes de congrés
Accés obert -
Pequeños proyectos de ingeniería como enseñanza no presencial
Llumà Fuentes, Jordi; Manzanares Brotons, Manuel; Rodriguez, Julian; Bordoy, Albert (Oficina de Serveis Editorials i Multimèdia del Servei de Comunicació Institucional de la UPC, 2004)
Text en actes de congrés
Accés obertLa introducción de la enseñanza no presencial abre la posibilidad a nuevas formas de aprendizaje no dirigido. En el presente trabajo se presentan los resultados de plantear un pequeño proyecto de ingeniería (el diseño de ... -
Prediction of mechanical properties of human rib cortical bone using fractal dimension
Velázquez Ameijide, Juan; García Vilana, Silvia; Sánchez Molina, David; Llumà Fuentes, Jordi; Martínez González, Eva; Rebollo-Soria, M. Carmen; Arregui Dalmases, Carlos (Gordon and Breach Science Publishers, 2020-10-26)
Article
Accés obertA large number of post mortem human subjects was used to investigate the relation between the micro-structure of rib cortical bone and the mechanical properties using Fractal Dimension. Uniaxial tensile tests were performed ... -
Predictive model for polishing times in mould finishing
González Rojas, Hernán Alberto; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Jorba Peiró, Jordi; Sánchez Egea, Antonio J. (EUETIB, 2013-12)
Comunicació de congrés
Accés obertEl pulido, proceso final utilizado en la producción de piezas, es a menudo lento y se aplica manualmente. Normalmente define la rugosidad superficial y la precisión de la pieza. Se lleva a cabo utilizando partículas duras ... -
Relation between mechanical and densimetric properties to fractal dimension in human rib cortical bone
García Vilana, Silvia; Sánchez Molina, David; Velázquez Ameijide, Juan; Llumà Fuentes, Jordi; Arregui Dalmases, Carlos (2023-07)
Article
Accés restringit per política de l'editorialNumerous prior studies hypothesized a power-law relationship () between cortical bone Young's modulus (E) and density (¿) with an exponent , that has not been previously justified in the literature on a theoretical level. ... -
Sostenibilitat en el transport- optimització del consum de combustible
Llumà Fuentes, Jordi; Manzanares Brotons, Manuel (Centre per a la sostenibilitat de la UPC, 2007)
Text en actes de congrés
Accés obertLa reducció del dispendi d’energia d’un vehicle es pot minimitzar mitjançant un ús adequat del sistema propulsor. El mètode desenvolupat implica l’elaboració d’un model numèric del vehicle i una descripció matemàtica de ... -
Sostenibilitat en el transport: optimització del consum de combustible
Llumà Fuentes, Jordi; Manzanares Brotons, Manuel (Centre per a la Sostenibilitat, 2007-07-12)
Text en actes de congrés / Comunicació de congrés
Accés obertLa reducció del dispendi d’energia d’un vehicle es pot minimitzar mitjançant un ús adequat del sistema propulsor. El mètode desenvolupat implica l’elaboració d’un model numèric del vehicle i una descripció matemàtica de ... -
Spectral analysis of forces during a ball-burnishing process assisted by vibrations
Gómez Gras, Giovanni; Travieso Rodríguez, José Antonio; Llumà Fuentes, Jordi; Jerez Mesa, Ramón (Destech, 2015)
Text en actes de congrés
Accés obertOne of the most recent innovations in manufacturing engineering has been the assistance of machining, finishing and superfinishing processes with vibrations as a means of improving the mechanical properties of the workpieces. ... -
Study of the influence of the manufacturing parameters on tensile properties of thermoplastic elastomers
Adrover Monserrat, Bàrbara; Llumà Fuentes, Jordi; Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2022-01-31)
Article
Accés obertAdditive manufacturing (AM) has increased its field of application, not only for prototypes but also for final parts. Therefore, the need of study new materials is currently growing. This paper aims to study the effect of ... -
Study of the lateral pass width for conventional and ultrasonic vibrations-assisted ball burnishing on Ti-6Al-4V specimens
Jerez Mesa, Ramón; Gómez Gras, Giovanni; Llumà Fuentes, Jordi; Travieso Rodríguez, José Antonio (2016)
Text en actes de congrés
Accés obertBall burnishing is a technological finishing process based on plastic deformation of the objective surface by means of a hard ball gliding over it. Along with its easiness of application, possible on the same machine where ... -
Study of the manufacturing process effects of fused filament fabrication and injection molding on tensile properties of composite PLA-wood parts
Zandi, Mohammad Damous; Jerez Mesa, Ramón; Llumà Fuentes, Jordi; Jorba Peiró, Jordi; Travieso Rodríguez, José Antonio (2020-05-30)
Article
Accés restringit per política de l'editorialThe present study evaluates the effects of manufacturing parameters on the tensile properties of a commercial composite material based upon polylactic acid (PLA) with wood fibers known as Timberfill. The specimens are built ... -
Study of the nanometric grain size distribution in iron compacts obtained by mechanical milling
Llumà Fuentes, Jordi; Benito Páramo, José Antonio; Roca, A.; Cabrera Marrero, José M.; Prado Pozuelo, José Manuel (2006-01)
Article
Accés obertA study has been carried out on the grain size distribution of cylindrical compacts obtained by consolidation of iron powder severely deformed by mechanical milling. Consolidation has been performed in two consecutive ... -
Study of the nanometric grain size distribution in iron compacts obtained by mechanical milling
Llumà Fuentes, Jordi; Benito Páramo, José Antonio; Cabrera Marrero, José M.; Prado Pozuelo, José Manuel; Roca Vallmajor, Antoni (Trans Tech Publications, 2005)
Text en actes de congrés
Accés obert -
Superficial effects of ball burnishing on TRIP steel AISI 301LN sheets
Jerez Mesa, Ramón; Fargas Ribas, Gemma; Roa Rovira, Joan Josep; Llumà Fuentes, Jordi; Travieso Rodríguez, José Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2021-01-03)
Article
Accés obertThis paper explores the consequences of applying an ultrasonic vibration-assisted ball burnishing process and its non-vibration assisted version on the topology and subsurface microstructure of a transformation-induced ... -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (2n parcial)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2008-01-18)
Examen
Accés restringit a la comunitat UPC -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (4t quadrimestre)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2007-05-08)
Examen
Accés restringit a la comunitat UPC -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (Examen 1er parcial)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2004-05-07)
Examen
Accés restringit a la comunitat UPC -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (Examen 1er parcial)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2003-11-14)
Examen
Accés restringit a la comunitat UPC -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (Examen 1er parcial)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2004-06-15)
Examen
Accés restringit a la comunitat UPC -
TECNOLOGIA DE MATERIALS CERÀMICS I COMPÒSITS (Examen 1er parcial)
Llumà Fuentes, Jordi (Universitat Politècnica de Catalunya, 2002-12-03)
Examen
Accés restringit a la comunitat UPC