Exploració per autor "Bermejo Broto, Sandra"
Ara es mostren els items 28-47 de 52
-
High voltage ultrathin-photovoltaic minimodules: fabrication technology and application to bioimplantable telesupplying
Bermejo Broto, Sandra; Silvestre Bergés, Santiago; Ortega Villasclaras, Pablo Rafael (2013)
Comunicació de congrés
Accés restringit per política de l'editorial -
High voltage ultrathin-photovoltaic minimodules: fabrication technology and application to bioimplantable telesupplying
Bermejo Broto, Sandra; Silvestre Bergés, Santiago; Ortega Villasclaras, Pablo Rafael (2014-05-01)
Article
Accés restringit per política de l'editorialIn this work we show small (0.49 cm2) and thin (<70 µm) photovoltaic mini-generators capable of providing open circuit voltages up to 99 V and short circuit currents of 43 µA, achieving a maximum density power of 4.8 mW/cm2. ... -
Impact of metallization techniques of surface passivation of high efficiency crystalline silicon solar cells
Coll Valentí, Arnau; Martín García, Isidro; Ortega Villasclaras, Pablo Rafael; Bermejo Broto, Sandra; López, Gema; Alcubilla González, Ramón (2013)
Text en actes de congrés
Accés restringit per política de l'editorialMost of the high-efficiency c-Si solar cells are based on dielectric films that electrically passivate c-Si surface and must keep their passivation properties after metal deposition on top of them. This work studies the ... -
Impedance modeling of silica nanoparticle metal insulator metal capacitors
Véliz Noboa, Bremnen Marino; Bermejo Broto, Sandra; Orpella García, Alberto; Castañer Muñoz, Luis María (2018-08-01)
Article
Accés obertIn this study, we have fabricated metal-insulator-metal (MIM) capacitors where the insulator layer is made of 255¿nm diameter silica nanospheres. The MIM devices have been characterized and modeled by electrochemical ... -
Impedance spectroscopy interpretation of silica and polystyrene colloidal suspensions
Véliz Noboa, Bremnen Marino; Orpella García, Alberto; Domínguez Pumar, Manuel; Bermejo Broto, Sandra (2020-03-01)
Article
Accés obertImpedance spectroscopy differences between colloidal 295-nm silica and 300-nm polystyrene nanoparticles in deionized water are analyzed in this work. Using two different two-electrode measurement setups, designed for this ... -
Improving a nozzle tip with a guard ring for an electrospray system
Véliz Noboa, Bremnen Marino; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (Institute of Electrical and Electronics Engineers (IEEE), 2017)
Text en actes de congrés
Accés restringit per política de l'editorialThe Electrospray technique allows the formation of small droplets from aqueous solutions that may contain nanoparticles of different materials in suspension, leading to the deposition of layers of the nanoparticles. The ... -
Improving the hydrophobicity and electrowetting reversibility of teflon layers
Ahmadi Zeidabadi, Maziar; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (2013)
Comunicació de congrés
Accés restringit per política de l'editorial -
Large area deposition of ordered nanoparticle layers by electrospray
Véliz Noboa, Bremnen Marino; Bermejo Broto, Sandra; Vives, Jordi; Castañer Muñoz, Luis María (2018-07-01)
Article
Accés obertMass production of ordered nanostructures with enhanced optical properties such as colloidal crystals for applications such as solar cells or organic light emitted diodes demands low-cost and large-scale manufacturing ... -
Laser contact through electrosprayed alumina inverse opals on silicon
Coll Valentí, Arnau; Bermejo Broto, Sandra; Martín García, Isidro; Alcubilla González, Ramón (2015-02-18)
Article
Accés obertIn crystalline silicon (c-Si) solar cell field, an intensive effort is being paid to reduce the quantity of silicon material used in each cell in order to minimize its costs. With the reduction of wafer thickness, light ... -
Light harvesting photovoltaic mini-generator
Bermejo Broto, Sandra; Silvestre Bergés, Santiago; Ortega Villasclaras, Pablo Rafael; Herrera, Gerard (2011-08-23)
Article
Accés restringit per política de l'editorialIn this work, the design, fabrication and characterisation of a millimetre-size photovoltaic (PV) energy source is described. The fabrication process is based on p-type silicon-on-insulator wafers. It is shown that scaling ... -
Low voltage 2D capacitive-coupled electrowetting
Ahmadi Zeidabadi, Maziar; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (2013)
Comunicació de congrés
Accés restringit per política de l'editorial -
Low-cost thermal s-d air flow sensor
Domínguez Pumar, Manuel; Masana Nadal, Francisco; Jiménez Serres, Vicente; Bermejo Broto, Sandra; Amírola Sanz, Jorge; Ballester, Javier; Fueyo, Norberto; Castañer Muñoz, Luis María (2002-10)
Article
Accés obertThis paper describes the design and optimization of a hot-wire air flowmeter. A low-cost design of the packaging allows good thermal contact with the airflow, as well as good thermal isolation between the hot and cold ... -
Metal-insulator-metal capacitor using electrosprayed nanoparticles
Véliz Noboa, Bremnen Marino; Bermejo Broto, Sandra; Coll Valentí, Arnau; Castañer Muñoz, Luis María (2014-07-07)
Article
Accés restringit per política de l'editorialAn electrospray technique has been used to deposit SiO2 nanoparticles as insulator layer of a metal-insulator-metal device. Impedance spectroscopy measurements show that a 4.4 factor increase in capacitance is achieved ... -
Modeling and simulation of a cost-effective microfluidic circuit for particles' manipulation
Virgilio, Vito di; Bermejo Broto, Sandra; Castañer Muñoz, Luis María; Coll Valentí, Arnau (2011)
Comunicació de congrés
Accés obert -
Nanohole particle filling by electrospray
Coll Valentí, Arnau; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (Institute of Electrical and Electronics Engineers (IEEE), 2013)
Text en actes de congrés
Accés restringit per política de l'editorialNanostructuring materials such as silicon provides a good technology to fabricate optical and sensing devices. The possibility to fill the pores or channels with different material opens the way to new applications. In ... -
Self-assembly of ordered polystyrene and silica nanostructures by electrospray
Coll Valentí, Arnau; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (2013)
Comunicació de congrés
Accés restringit per política de l'editorial -
Self-assembly of ordered silica nanostructures by electrospray
Coll Valentí, Arnau; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (2014-06-01)
Article
Accés restringit per política de l'editorialIn this paper we introduce the electrospray technique as a suitable method to create SiO2 3D ordered nanostructures. We describe the experimental procedure and deposition parameters required. We have found that the use of ... -
Simulation of photonic crystals particle filling by electrospray
Coll Valentí, Arnau; Virgilio, Vito di; Bermejo Broto, Sandra; Castañer Muñoz, Luis María (2010)
Text en actes de congrés
Accés restringit per política de l'editorialPhotonic crystals are widely used in optical applications as waveguides and band filters. Filling the periodic structural material of photonic crystals with other materials is very useful in order to change the optical ... -
Space-charge limited ionic conductivity enhancement in gel polymer electrolyte capacitors by emb e dding nanoparticles
Cedeño Mata, Kristel Michelle; Orpella García, Alberto; Domínguez Pumar, Manuel; Bermejo Broto, Sandra (2021-08-03)
Article
Accés obertIn this work, a novel mixture of ionic liquid gel polymer electrolyte (ILGPE), containing 1-butyl-3-methylimidazolium bromide, ammonium acetate and poly(vinyl alcohol), with Si@C and SiO2 embedded nanoparticles is fabricated. ... -
Spherical probe for the thermophysical characterization of regoliths for planetary exploration using frequency methods
Domínguez Pumar, Manuel; Rosero Pozo, Carlos Alberto; Pons Nin, Joan; Ramos Castro, Juan José; Szewczyk, Daria; Jezowski, Andrzej; Solà Peñafiel, Nil; Manyosa i Vilardell, Xavier; Bermejo Broto, Sandra; Jiménez Serres, Vicente (2022-12-01)
Article
Accés obertThe objective of this paper is to analyse the capability of a spherical thermoprobe, recently proposed as a 3D heat flux sensor for regoliths, and additionally to characterize the thermophysical properties of regoliths. ...