Exploració per autor "Gil Espert, Lluís"
Ara es mostren els items 99-118 de 131
-
New equations and methods for solving the size effects in the comparison of 2D Finite Element Analysis
Marcé Nogué, Jordi; DeMiguel, Daniel; Fortuny Terricabras, Josep; De Esteban Trivigno, Soledad; Gil Espert, Lluís (2012)
Text en actes de congrés
Accés restringit per política de l'editorial -
Non-destructive techniques for characterising earthen structures
Bernat Masó, Ernest; Teneva, Elitsa; Mercedes Cedeño, Luis Enrique; Gil Espert, Lluís (International Centre for Numerical Methods in Engineering (CIMNE), 2021)
Comunicació de congrés
Accés restringit per política de l'editorialEarthen architecture is one of the most relevant building technologies among heritage structures. However, mechanical properties are commonly obtained from destructive tests. To contribute at changing this trend, two ... -
Numerical analysis of the load-bearing capacity of brick masonry walls strengthened with textile reinforced mortar and subjected to eccentric compressive loading
Bernat Masó, Ernest; Gil Espert, Lluís; Roca Fabregat, Pedro (2015-05-15)
Article
Accés obertThere is little research about the numerical modelling of brick masonry walls strengthened with Textile Reinforced Mortar (TRM) against second order bending effects. Thus, a numerical model has been implemented to cover ... -
Numerical homogenization and experimental validation of a composite plate using modal analysis
Pérez Martínez, Marco Antonio; Gil Espert, Lluís; Hammami, Farah; Neifar, Mondher; Chafra, Moez (2010)
Text en actes de congrés
Accés restringit per acord de confidencialitatA Finite Element (FE) simulation and an experimental (EXP) test are performed for the validation of the homogenized global elastic properties of a composite material plate. Composite material homogenization is based on ... -
Numerical simulation of masonry walls strengthened with vegetal fabric reinforced cementitious matrix (FRCM) composites and subjected to cyclic loads
Mercedes Cedeño, Luis Enrique; Bernat Masó, Ernest; Gil Espert, Lluís (Elsevier, 2022-01)
Article
Accés obertThe growing concern for the preservation of old buildings and the wide use of masonry in the construction of civil works has led to a great development of specific techniques to strengthen masonry structures. FRCM (fabric ... -
Performance of hemp-FRCM-strengthened beam subjected to cyclic loads
Mercedes Cedeño, Luis Enrique; Mendizábal Dinucci, Virginia Dolores; Bernat Masó, Ernest; Gil Espert, Lluís (2022-03-03)
Article
Accés obertFabric-reinforced cementitious matrix (FRCM) composites are materials that are usually applied to strengthen existing structures. In this study, a hemp mesh coated with epoxy was manufactured and combined with a cementitious ... -
Propiedades mecánicas de compuestos de matriz cementicia reforzados con tejidos pretensados (PFRCM)
Bernat Masó, Ernest; Mercedes Cedeño, Luis Enrique; Gil Espert, Lluís (2019)
Text en actes de congrés
Accés obertLa matriz cementicia reforzada con tejidos (FRCM) es un material de refuerzo compuesto que se usa para reforzar estructuras de mampostería y de hormigón de forma pasiva, debido al requisito de activación de fisuras. Se ... -
Protective layers for concrete elements against impact load
Mercedes Cedeño, Luis Enrique; Bernat Masó, Ernest; Gil Espert, Lluís (2023-11-17)
Article
Accés obertDuring their lifetimes, concrete structures can be subjected to impact actions that can cause considerable damage or collapse. This paper proposes the use of protective layers and/or deformable coating materials to prevent ... -
Quasi-homothetic transformation for comparing the mechanical performance of planar models in biological research
Marcé Nogué, Jordi; DeMiguel, Daniel; Fortuny Terricabras, Josep; Esteban Trivigno, Soledad de; Gil Espert, Lluís (2013-11)
Article
Accés obertThe potential of Finite Element Analysis (FEA) as an analytical technique in biological research has been widely highlighted in recent years. In spite of its great power, only in the best of circumstances one can compare ... -
¿Quo vadis ciencia?
Díez, José; Estany, Anna; Gil Espert, Lluís; Hoefer, Carl; Martí, Genoveva; Martínez, Manolo; Romea Rosas, Carlos; Solé, Albert; Sus, Adán; Vallverdú, Jordi (Universitat Politècnica de Catalunya. Iniciativa Digital Politècnica, 2016)
Llibre
Accés obert¿Es el azar la frontera de nuestro conocimiento? ¿Cómo influye el contexto social en el avance de la ciencia? ¿Quién va más rápido, la tecnología o la ciencia? ¿Cuál es el papel de la computación en el conocimiento? ¿Qué ... -
Refuerzo a cortante de vigas de hormigón armado con tejidos y matrices base cemento. Análisis y comparativa
Escrig Pérez, Christian; Gil Espert, Lluís (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2016-06-01)
Llibre
Accés obertEl principal objetivo de la presente investigación es realizar un estudio comparativo sobre la capacidad de diversos tipos de TRM actuando como refuerzo a cortante en vigas de hormigón armado de características actuales1. ... -
Self-assessment exercises in continuum mechanics with autonomous learning
Marcé Nogué, Jordi; Gil Espert, Lluís; Pérez Martínez, Marco Antonio; Sánchez Romero, Montserrat (Universitat Politècnica de Catalunya. Institut de Ciències de l'Educació (ICE), 2013-03-19)
Article
Accés obert -
Self-assessment exercises in continuum mechanics with autonomous learning
Marcé Nogué, Jordi; Gil Espert, Lluís; Pérez Martínez, Marco Antonio; Sánchez Romero, Montserrat (Universitat Politècnica de Catalunya. Institut de Ciències de l'Educació, 2013-03)
Article
Accés obert -
Shear performance of the interface of sandwich specimens with fabric-reinforced cementitious matrix vegetal fabric skins
Gil Espert, Lluís; Mercedes Cedeño, Luis Enrique; Mendizábal Dinucci, Virginia Dolores; Bernat Masó, Ernest (Multidisciplinary Digital Publishing Institute, 2024-01-19)
Article
Accés obertThe utilization of the vegetal fabric-reinforced cementitious matrix (FRCM) represents an innovative approach to composite materials, offering distinct sustainable advantages when compared to traditional steel-reinforced ... -
Soil biostabilisation and interaction with compaction processes for earthen engineering structures production
Bernat Masó, Ernest; Gil Espert, Lluís; Lis Arias, Manuel José; Teneva, Elitsa (2021-08-17)
Article
Accés obertInteraction between microbially induced calcium carbonate precipitation (MICP) and compaction procedures to stabilise raw soil materials has been studied with the aim of producing earthen engineering structures. Initial ... -
Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology
Zahid, Muhammad; Shafiq, Nasir; Hasnain Isa, M.; Gil Espert, Lluís (2018-09-01)
Article
Accés obertFly ash-based geopolymer binders have been identified as one of the alternatives to the Ordinary Portland Cement (OPC), which qualify the criteria of green construction material. In the process of enhancement of the ... -
Strength performance of unreinforced brick masonry walls under flexo-compression load. Analytical methods
Bernat Masó, Ernest; Gil Espert, Lluís (2014)
Article
Accés obertThe structure of many historical buildings relies on unreinforced masonry load-bearing walls. In the case of large slenderness or significant eccentricity of the vertical compressive loads the mechanism formation failure ... -
Stress relaxation analysis of adhesively bonded anchorages for CFRP tendons
Puigvert Cobos, Francesc; Gil Espert, Lluís; Escrig Pérez, Christian; Bernat Masó, Ernest (2014)
Article
Accés restringit per política de l'editorialAn adhesively bonded anchor for Carbon Fibre Reinforced Polymer (CFRP) tendons was investigated under the stress relaxation phenomenon. Experimental stress relaxation tests were undertaken on anchorages with four different ... -
Structural characterisation of textile ceramic technology used as a curtain wall
Bernat Masó, Ernest; Gil Espert, Lluís; Roca Fabregat, Pedro; Sarrablo Moreno, Vicenç; Escrig Pérez, Christian (2013-12)
Article
Accés obertTextile Ceramic Technology (TCT) is a system composed of ceramic units installed in a grid of steel wires. TCT application as a curtain wall which allows ventilation is expected to be an inexpensive, aesthetic and sustainable ... -
Study of an insulating hemp-based bio-material: mechanical, thermal and acoustic properties
Martínez Martínez, Borja; Gil Espert, Lluís; Bernat Masó, Ernest (2022-07-18)
Article
Accés obertCurrently there is a need to develop more sustainable and renewable materials compromised with the environment. From these needs, hemp stalk has great potential because it is mostly a waste material. Moreover, hemp shives ...