Exploració per autor "Llanes Pitarch, Luis Miguel"
Ara es mostren els items 46-65 de 177
-
Efecto de la microesctructura en la anisotropía a fractura y fatiga de aceros de herramienta para trabajo en frío
Goez, Alexey; Picas Anfruns, Ingrid; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel (2010)
Text en actes de congrés
Accés restringit per política de l'editorial -
Efecto de la microestructura en la nucleación y propagación de fisuras en aceros de herramienta de trabajo en frío
Picas Anfruns, Ingrid; Cuadrado Lafoz, Nuria; Casellas Padró, Daniel; Goez, Alexey; Llanes Pitarch, Luis Miguel (2011)
Text en actes de congrés
Accés obert -
Effect of carbides properties and microstructural characteristics on crack nucleation and propagation in cold forming tools
Casellas Padró, Daniel; Picas Anfruns, Ingrid; Castellà Rodil, Marc; Goez, Alexey; Llanes Pitarch, Luis Miguel; Casas Aguirregomezcorta, Begoña; Valls, I. (2009)
Text en actes de congrés
Accés restringit per política de l'editorial -
Effect of corrosion-induced damage on microstructure and residual strenght of WC-Co,Ni cemented carbide
Zheng, Y.F.; Fargas Ribas, Gemma; Armelín Diggroc, Elaine Aparecida; Llanes Pitarch, Luis Miguel (2018)
Comunicació de congrés
Accés obert -
Effect of crystal anisotropy on the mechanical properties of WC embedded in WC-Co cemented carbides
Cuadrado, Núria; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel; Gonzalez, Iban; Caro, Jaume (2011)
Text en actes de congrés
Accés obert -
Effect of Y2O3 content on rheology, hardness and fracture toughness of 3D printing zirconia-base ceramic materials
Yarahmadi, Mona; Roa Rovira, Joan Josep; Cabezas, L.; Llanes Pitarch, Luis Miguel; Fargas Ribas, Gemma (Universitat Politècnica de Catalunya, 2022-06-16)
Comunicació de congrés
Accés obert -
Enhanced contact fatigue behavior of coated tool steels by using PM substrates
Ramírez, Giselle; Goez, Alexey; Casas Aguirregomezcorta, Begoña; Valls, I.; Martinez, R.; Llanes Pitarch, Luis Miguel (2009)
Text en actes de congrés
Accés restringit per política de l'editorial -
Enhanced hydrothermal resistance of Y-TZP ceramics through colloidal processing
Rayón Encinas, Emilio; Moreno, R.; Alcázar, C.; Salvador Moya, Maria Dolores; Manjon Herrera, Francisco Javier; Jiménez Piqué, Emilio; Llanes Pitarch, Luis Miguel (2013-02-28)
Article
Accés restringit per política de l'editorialTwo commercial zirconia powders with 3 mol% of yttria (TZ3YE and TZ3YS, labeled as ZE and ZS, respectively) sup- plied by Tosoh (Japan) were used for this study. Maximum colloidal stability for ZE was achieved by ... -
Evolution of microstructure and residual stresses in gradually ground/polished 3Y-TZP
Minguela Díaz, Joaquim; Slawik, Sebastian; Mücklich, Frank T.; Ginebra Molins, Maria Pau; Llanes Pitarch, Luis Miguel; Mas Moruno, Carlos; Roa Rovira, Joan Josep (Elsevier, 2019-01-01)
Article
Accés obert
Realitzat a/amb: Universität des Saarlandes / Institut de Bioenginyeria de CatalunyaA comprehensive study of progressively ground/polished 3Y-TZP was performed with the aim of better understanding the mechanisms driving the microstructural modifications observed after such procedures, and identifying the ... -
Fabrication and tribological performance of a laser-textured hardmetal guiding stone for honing processes
Fang, Shiqi; Klein, Sven; Hsu, Chia-Jui; Llanes Pitarch, Luis Miguel; Gachot, C; Bähre, Dirk (2019-11-01)
Article
Accés obertHoning is often implemented as surface finish process by improving geometrical and form precision of workpieces. Guiding stones, usually made of hard materials with requirement of excellent tribological properties, play a ... -
Fabrication of interference textures on cemented carbides using nanosecond and femtosecond laser pulses
Llanes Pitarch, Luis Miguel (Elsevier, 2020)
Article
Accés obertLaser surface texturing is becoming popular in recent years, as its application in variant fields can bring in many benefits, such as to improve tribological performances of contact surfaces. As frontline engineering ... -
Fatiga isotérmica de aceros para herramientas de trabajo en caliente
Mateo García, Antonio Manuel; Casas, B.; Mir Carbonell, Jordi; Molas, S.; Llanes Pitarch, Luis Miguel (2010)
Text en actes de congrés
Accés restringit per política de l'editorialEl trabajo reportado en este artículo forma parte de un proyecto de investigación en el cual se tratan de desarrollar aceros de herramientas para conformado en caliente con prestaciones optimizadas. Para ello se comenzó ... -
Fatiga isotérmica de aceros para herramientas de trabajo en caliente
Mateo García, Antonio Manuel; Llanes Pitarch, Luis Miguel; Casas, B.; Mir, J.; Molas, S. (2011-06-20)
Article
Accés obertEl trabajo reportado en este artículo forma parte de un proyecto de investigación en el cual se tratan de desarrollar aceros de herramientas para conformado en caliente con prestaciones optimizadas. Para ello se comenzó ... -
Fatigue behavior of a WC-Ni cemented carbide
Tarragó Cifre, Jose María; Ferrari, Claudio; Reig, Blanca; Coureaux Mustelier, David; Schneider, Ludwig; Llanes Pitarch, Luis Miguel (2013)
Comunicació de congrés
Accés restringit per política de l'editorialNickel is one of the materials most commonly used as a binder alternative to cobalt in cemented carbides. However, knowledge on mechanical properties and particularly on fatigue response of nickel-base cemented carbides ... -
Fatigue crack growth behavior of coarse-grained hardmetals
Serra Fanals, Marc; García Marro, Fernando; Konyashin, I.; Ries, B.; Llanes Pitarch, Luis Miguel (Universitat Politècnica de Catalunya, 2022-06-16)
Comunicació de congrés
Accés obert -
Fatigue crack growth behavior of WC-Co and WC-CoNi cemented carbides
Tarragó Cifre, Jose María; Roa Rovira, Joan Josep; Valle, Vladimir; Jessica, Marshall; Mateo García, Antonio Manuel; Llanes Pitarch, Luis Miguel (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2014)
Text en actes de congrés
Accés obertEn este trabajo se investigó el crecimiento de grietas por fatiga para diversas calidades de metal duro en función de la microestructura y el cociente de carga aplicada (R). De esta forma, se evaluó la influencia de la ... -
Fatigue performance improvement of electrical discharge machined hardmetals by means of combined thermal annealing and surface modification routes
Llanes Pitarch, Luis Miguel; Casas Aguirregomezcorta, Begoña; Salán Ballesteros, Maria Núria; Mestra Rodríguez, Álvaro Miguel; Torres Hernández, Yadir (2013-01)
Article
Accés restringit per política de l'editorialElectrical discharge machining (EDM) provides an effective means of shaping hardmetals. However, it is also known that surface integrity of these materials may be affected by EDM, degrading their tribomechanical characteristics. ... -
Fatigue strength of cold-work tool steels: microstructure – critical flaw correlation
Goez, Alexey; Picas Anfruns, Ingrid; Valls, I.; Casas, B.; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel (2009)
Comunicació de congrés
Accés restringit per política de l'editorial -
Fatigue susceptibility under contact loading of hardmetals coated with ceramic films
Llanes Pitarch, Luis Miguel; Tarrés, E.; Ramírez, Giselle; Botero Vega, Carlos Alberto; Jiménez Piqué, Emilio (2010-04)
Article
Accés restringit per política de l'editorialThe contact fatigue behavior of a fine-grained hardmetal coated with two distinct ceramic films, either a TiN monolayer or a WC/C multilayer, is studied by means of indentation testing techniques. Spherical indentation ... -
Fatigue testing and properties of hardmetals in the gigacycle range
Kotas, Agnieszka Betzwar; Danninger, Herbert; Weiss, Brigitte; Mingard, K.P.; Sánchez, José; Llanes Pitarch, Luis Miguel (2017-01-01)
Article
Accés obertHardmetal products are frequently fatigue loaded in service, such as e.g. cutting tools for milling or percussion drills. In the present work, the fatigue behaviour of hardmetals was investigated into the gigacycle range ...