Exploració per autor "Gil Mur, Francisco Javier"
Ara es mostren els items 59-78 de 130
-
I Jornada de R+D+I
Jordana Riba, Francisco de Paula; Serrat Piè, Carles; Gil Mur, Francisco Javier (2010-05-05)
Audiovisual
Accés obert -
Immobilization strategies to functionalize tantalum surfaces with cell-adhesive peptides: physicochemical and biological characterization
Mas Moruno, Carlos; Garrido Dominguez, Beatriz; Rodríguez Rius, Daniel; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier (Curran, 2014)
Comunicació de congrés
Accés obert -
Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria
Hoyos Nogués, Mireia; Brosel, Sergi; Abramova, Natalia; Muñoz, FJ; Andrey, Bratov; Gil Mur, Francisco Javier; Mas Moruno, Carlos (2016)
Article
Accés obert
Realitzat a/amb: Center for Research in NanoEngineering (CRNE)Peri-implantitis, an inflammation caused by biofilm formation, constitutes a major cause of implant failure in dentistry. Thus, the detection of bacteria at the early steps of biofilm growth represents a powerful strategy ... -
Implant-abutment connections: influence of the design on the microgap and their fatigue and fracture behavior of dental implants
Gil Mur, Francisco Javier; Herrero Climent, Mariano; Lázaro, Pedro; Rios Santos, Jose Vicente (2014-04-10)
Article
Accés restringit per política de l'editorialMicrogap between implant and abutment can produce biological and mechanical problems such as peri-implantitis and/or fatigue failures. The aim of this study was to evaluate microgap size and fatigue ... -
Importance of the roughness and residual stresses of dental implants on fatigue and osseointegration behavior. In vivo study in rabbits
Velasco Ortega, E; Monsalve Guil, L; Jimenez Guerra, A; Ortiz Garcia, Ivan; Moreno Muñoz, Jesus; Nuñez Marquez, Enrique; Pegueroles Neyra, Marta; Pérez Antoñanzas, Román; Gil Mur, Francisco Javier (2016-12-01)
Article
Accés restringit per política de l'editorial
Realitzat a/amb: Universitat Internacional de Catalunya. Facultat d'OdontologiaThis study focuses on the fatigue behavior and bone-implant attachment for the more usual surfaces of the different CP-titanium dental implants. The implants studied were: as-received (CTR), acid etching (AE), spark-anodization ... -
Improvement in adhesion of the brackets to the tooth by sandblasting treatment
Espinar, Eduardo; Barrera, J.; Llamas, José María; Solano, E.; Rodríguez Rius, Daniel; Gil Mur, Francisco Javier (Springer, 2011)
Article
Accés restringit per política de l'editorialIn oral orthodontic treatments, achievement of a good adhesion between brackets and teeth surfaces is essential. One way to increase adhesion is to apply a surface treatment of teeth facing surfaces through the ... -
In vitro corrosion behavior of lingual orthodontic archwires
Suárez, Carlos; Vilar, Teresa; Sevilla Sánchez, Pablo; Gil Mur, Francisco Javier (2011)
Article
Accés obertTo investigate the in vitro electrochemical corrosive behavior of archwires used in lingual orthodontics and the effects on the phase transition temperatures. Materials and Methods. Six different types of archwires of ... -
In vitro evaluation of surface topographic changes and nickel release of lingual orthodontic archwires
Suárez, Carlos; Vilar, Teresa; Gil Mur, Francisco Javier; Sevilla Sánchez, Pablo (2010-02)
Article
Accés restringit per acord de confidencialitatThe objective of the article is to study surface topographic changes and nickel release in lingual orthodontic archwires in vitro. Stainless steel (SS), nickel–titanium (NiTi) and copper–nickel–titanium (CuNiTi) ... -
In-vitro response of pre-osteoblastic MG63 cells on Ni-free Ti shape memory substrates
Arciniegas Angarita, Milena Patricia; Peña Andrés, Francisco Javier; Gil Mur, Francisco Javier; Manero Planella, José María (2013)
Article
Accés restringit per política de l'editorialNi-free Ti alloys are a potential strategy to overcome the risk of Ni-adverse reactions and rigidity mismatch for implant materials. Here, we report the biological behavior induced for two promising candidate alloys—Ti19.1Nb8.8Zr ... -
Influence of acid-etching after grit-blasted on osseointegration of titanium dental implants: in vitro and in vivo studies
Herrero Climent, Mariano; Lázaro, Pedro; Rios Santos, Jose Vicente; Lluch Margarit, Sara; Marqués Calvo, M. Soledad; Guillem Martí, Jordi; Gil Mur, Francisco Javier (2013-04)
Article
Accés restringit per política de l'editorial -
Influence of cold work in the elastic modulus of the Ti-16.2Hf-24.8Nb-1Zr alloy characterized by instrumented nanoindentation
González Colominas, Marta; Peña Andrés, Francisco Javier; Manero Planella, José María; Gil Mur, Francisco Javier (2010)
Article
Accés restringit per política de l'editorialNowadays, β type Ti-based alloys have been developed for load transfer clinical applications due to their superelasticity, shape memory effect, low elastic modulus and high damping capacity [1]. These properties promote ... -
Influence of different CoCrMo counterfaces on wear in UHMWPE for artificial joints
González-Mora, V. A.; Hoffmann, Michael; Stroosnijder, R.; Espinar, Eduardo; Llamas, José María; Fernández-Fairén, Mariano; Gil Mur, Francisco Javier (Springer, 2011)
Article
Accés obertWear tests were carried out to study the effect of various counterface materials in the wear behaviour of Ultra High Molecular Weight Polyethylene (UHMWPE). The materials used as counterfaces were based on varieties of ... -
Influence of Soft Drinks with Low pH on Different Ni-Ti Orthodontic Archwire Surface Patterns
Ábalos, C.; Paúl, A.; Mendoza, A.; Solano, E.; Palazon, C.; Gil Mur, Francisco Javier (2013-03)
Article
Accés obertThe aim of this study was to determine the influence of soft drinks on the surface of Ni-Ti archwires and their corrosion behavior. Archwires with different patterns (smooth, scratch, dimple, and crack) were selected and ... -
Influence of the elastic modulus on the osseointegration of dental implants
Brizuela Velasco, Aritza; Herrero Climent, Mariano; Ríos Carrasco, Elisa; Rios Santos, Jose Vicente; Pérez Antoñanzas, Román; Manero Planella, José María; Gil Mur, Francisco Javier (Multidisciplinary Digital Publishing Institute (MDPI), 2019-01-01)
Article
Accés obert
Realitzat a/amb: Universidad de Oviedo / Universidad de Sevilla / Universitat Internacional de CatalunyaThe load transfer from metallic prosthesis to tissue plays an important role in the success of a designed device. From a mechanical behavior point of view, the load transfer will be favored when the elastic modulus between ... -
Influence of the Height of the External Hexagon and Surface Treatment on Fatigue Life of Commercially Pure Titanium Dental Implants
Gil Mur, Francisco Javier; Aparicio Bádenas, Conrado José; Manero Planella, José María; Padrós, Alejandro (2009)
Article
Accés restringit per política de l'editorial
Realitzat a/amb: University of Minnesota School of Dentistry -
Influence of the microstructure on electrochemical corrosion and nickel release in NiTi orthodontic archwires
Briceño, J.; Romeu, A.; Espinar, Eduardo; Llamas Carreras, Jose Maria; Gil Mur, Francisco Javier (2013)
Article
Accés restringit per política de l'editorialThe aim of this work was to determine the influence of the present phases and the chemical composition on the corrosion behavior and the nickel ion release of the NiTi orthodontic archwires. Eight Ni–Ti archwires from six ... -
Influence of topographical feature on the fluoride corrosión of Ni-Ti orthodontic archwires
Abalos, C.; Paúl, A.; Mendoza, A.; Solano, E.; Gil Mur, Francisco Javier (Springer, 2011)
Article
Accés restringit per política de l'editorialDifferent manufacturing processes of Ni–Ti archwires respond differently to corrosion due to the surface conditions involved. In this study, several topographical features and their influence upon fluoride corrosion ... -
Influencia de la naturaleza de las partículas de proyección en el proceso de shot peening en la mejora de la osteointegración de implantes dentales.
Aparicio, C.; Gil Mur, Francisco Javier; Padrós, A.; Peraire, C.; Planell Estany, Josep Anton (Sociedad Ibérica de Biomecánica y Biomateriales, 1997-12)
Article
Accés obertEl presente trabajo se ha centrado en valorar el efecto que tiene sobre las características superficiales, tratar la superficie de discos de Ti C. P., mediante un shot peening con distintos tipos de partículas de proyección: ... -
Influencia del proceso de esterilización en la mojabilidad del titanio modificado superficialmente
Pergueroles, M.; Menéndez Crespo, Emilio; Aparicio, C.; Planell Estany, Josep Anton; Gil Mur, Francisco Javier (Sociedad Ibérica de Biomecánica y Biomateriales, 2004-12)
Article
Accés obertEl objetivo de este trabajo es estudiar el cambio en las propiedades energéticas de muestras de titanio comercialmente puro debido a distintos tratamientos superficiales y a distintos métodos de esterilización; con la ... -
Installing multifunctionality on titanium with RGD-decorated polymeric nanocapsules: Towards new osteointegrative therapies
Mas Moruno, Carlos; Hoyos Nogués, Mireia; Manero Planella, José María; Gil Mur, Francisco Javier; Albericio Palomera, Fernando; Rocas, Josep; Rocas, Pau (2014)
Comunicació de congrés
Accés obert