Exploració per autor "Maspoch Rulduà, M. Lluïsa"
Ara es mostren els items 116-125 de 125
-
Tensile properties of LDPE/electrical cable waste blends prepared by melt extrusion process
Franco-Urquiza, Edgar; Camacho, N.; Maspoch Rulduà, M. Lluïsa (2017-04-01)
Article
Accés obertIn this study low density poly-ethylene (LDPE)/electrical cable waste blends were prepared using asingle-screw extruder at pilot plant level. The cable waste was mainly composed of LDPE, synthetic rubbers, flexible poly-vinyl ... -
The effect of organo-modifier on the structure and properties of poly[ethylene–(vinyl alcohol)]/organo-modified montmorillonite composites
Franco Urquiza, Edgar Adrian; Gamez Pérez, José; Sánchez Soto, Miguel; Santana Pérez, Orlando Onofre; Maspoch Rulduà, M. Lluïsa (2010-02-02)
Article
Accés restringit per política de l'editorialEthylene–(vinyl alcohol) (EVOH)/organo-modified montmorillonite clay (OMMT) composites were prepared using commercial OMMTs with two different organo-modifiers. The first one has polar groups, which interact with EVOH ... -
The effect of titanium dioxide surface modification on the dispersion, morphology, and mechanical properties of recycled PP/PET/TiO2 PBNANOs
Matxinandiarena, Eider; Múgica, Agurtzane; Zubitur, Manuela; Loaeza Becerril, Alfonso David; Santana Pérez, Orlando Onofre; Maspoch Rulduà, M. Lluïsa (Multidisciplinary Digital Publishing Institute (MDPI), 2019-10-16)
Article
Accés obertTitanium dioxide (TiO2) nanoparticles have recently appeared in PET waste because of the introduction of opaque PET bottles. We prepare polymer blend nanocomposites (PBNANOs) by adding hydrophilic (hphi), hydrophobic (hpho), ... -
The influence of the clay particles on the mechanical properties and fracture behavior of PLA/o-MMT composite films
Franco Urquiza, E; Velázquez Infante, Julio César; Cailloux, Jonathan; Santana Pérez, Orlando Onofre; Maspoch Rulduà, M. Lluïsa (2015-03-01)
Article
Accés obertIn this study, calendered films of polylactic acid/organo-montmorillonite clay (PLA/o-MMT) were prepared and the influence of the clay particles' morphology on the mechanical properties and fracture behavior was evaluated. ... -
The multi-scalar effect of incorporating nanofillers and cellulosic-based reinforcements into polyurethane foams: towards the development of low cost structural lightweight materials
Antunes, Marcelo de Sousa Pais; Maspoch Rulduà, M. Lluïsa; Velasco Perero, José Ignacio (2012)
Text en actes de congrés
Accés restringit per política de l'editorialIn the present work polyurethane foams containing different low cost cellulosic-based reinforcements and variable concentra tions of a silicate-Jayered nanoclay were prepared and characterized. with the objective of ... -
Thermal degradation of poly(lactic acid) and acrylonitrile-butadiene-styrene bioblends: Elucidation of reaction mechanisms
Carrasco Alonso, Félix Ángel; Santana Pérez, Orlando Onofre; Cailloux, Jonathan; Sánchez Soto, Miguel; Maspoch Rulduà, M. Lluïsa (2017-05-15)
Article
Accés obertSquare plates (nominal tickness: 3 mm, nominal width: 100 mm) of diferent rheolgically modified PLA/acrylonitrile-butadiene-styrene (ABS) blends were manufactured through injection molding process. During processing, the ... -
Toughened carbon fibre fabric-reinforced thermoplastic composites
Abt, Tobias Martin; Sánchez Soto, Miguel; Maspoch Rulduà, M. Lluïsa; Velasco Perero, José Ignacio (Universidad de Sevilla. Grupo de Elasticidad y Resistencia de Materiales, 2014)
Text en actes de congrés
Accés restringit per política de l'editorialToughened carbon fibre fabric-reinforced composites were obtained by compression moulding of powder prepregs, using a modified cyclic butylene terephthalate (pCBT) matrix and a bi-directional [0°/90°] carbon fibre fabric. ... -
Using the small punch test to analyse the influence of ultraviolet radiation on the mechanical behaviour of recycled polyethylene terephthalate
Abt, Tobias Martin; Maspoch Rulduà, M. Lluïsa (2019-10-01)
Article
Accés obertThe aim of this work is to evaluate the feasibility of small punch test as a tool for analysing the mechanical response of small plastic parts or specimens. Here, the small punch test was used to study the possible influence ... -
Using viscoelastic properties to quantitatively estimate the amount of modified poly(Lactic Acid) chains through reactive extrusion
Cailloux, Jonathan; Santana Pérez, Orlando Onofre; Bou Serra, Jordi; Carrasco Alonso, Félix Ángel; Maspoch Rulduà, M. Lluïsa (2015-05-12)
Article
Accés obertIn this study the dynamic viscoelastic properties of three structurally modified poly(lactic acid) (PLA) samples processed through reactive extrusion were analyzed. While classical chromatographic and spectroscopic techniques ... -
Viabilidad del reaprovechamiento de residuos de PVC provenientes de cables eléctricos: propiedades mecánicas
Franco Urquiza, Edgar Adrian; Maspoch Rulduà, M. Lluïsa (2014-07-01)
Article
Accés restringit per política de l'editorialEn este trabajo se han evaluado las propiedades mecánicas de desechos de cloruro de polivinilo (PVC) provenientes de cables eléctricos. El residuo contenía 60% de PVC, 30% de polietileno, 7% de goma y 3% de fracción metálica. ...