Exploració per autor "Oller Martínez, Sergio Horacio"
Ara es mostren els items 76-95 de 166
-
High cycle fatigue simulation: a new stepwise load-advancing strategy
Barbu, Lucia Gratiela; Oller Martínez, Sergio Horacio; Martínez García, Javier; Barbat Barbat, Horia Alejandro (2015-08)
Article
Accés obertA stepwise load-advancing strategy for cyclic loading will be presented in this paper that yields convergence in reasonable computational time for highly nonlinear behaviour occurring past the S–N curve. The algorithm is ... -
High-cycle fatigue constitutive model and a load-advance strategy for the analysis of unidirectional fiber reinforced composites subjected to longitudinal loads
Barbu, Lucia Gratiela; Oller Martínez, Sergio Horacio; Martínez García, Javier; Barbat Barbat, Horia Alejandro (2019-07)
Article
Accés obertA fatigue constitutive model valid for the composite constituent will be presented in this paper. The composite behaviour will be obtained by means of the serial/parallel mixing theory that is also used as a constitutive ... -
Impact damage identification in composite laminates using vibration testing
Pérez Martínez, Marco Antonio; Gil Espert, Lluís; Oller Martínez, Sergio Horacio (2014-02)
Article
Accés restringit per política de l'editorialDue to the problems arising from impact damage in composite laminates, there is a need to develop fast, accurate, cost-effective and non-destructive testing methods to identify this type of damage at an early stage and ... -
Impact damage prediction in carbon fiber-reinforced laminated composite using the matrix-reinforced mixing theory
Pérez Martínez, Marco Antonio; Martínez García, Javier; Oller Martínez, Sergio Horacio; Gil Espert, Lluís; Rastellini, Fernando G.; Flores, Fernando (2013-10-01)
Article
Accés obertThe impact damage tolerance of fiber-reinforced laminated composite materials is a source of concern, mainly due to internal induced damage which causes large reductions on the strength and stability of the structure. This ... -
Importance of non-simulated failure modes in incremental dynamic analysis (IDA) of non-ductile RC frames
López Almansa, Francisco; Alfarah, Bashar; Oller Martínez, Sergio Horacio (International Association for Earthquake Engineering, 2017)
Text en actes de congrés
Accés restringit per política de l'editorialNonlinear dynamic analysis of reinforced concrete structures requires a thorough understanding of behavior of structural elements for all levels of performance, especially collapse. Main reason is that reinforced concrete ... -
Inelastic analysis of geometrically exact rods
Mata Almonacid, Pablo; Barbat Barbat, Horia Alejandro; Oller Martínez, Sergio Horacio; Boroschek Krauskopf, Rubén Luis (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2008)
Llibre
Accés obert -
Large scale validation of a new isotropic hardening law for the barcelona plastic damage model under ultra low cycle fatigue conditions
Barbu, Lucia Gratiela; Martínez García, Javier; Oller Martínez, Sergio Horacio; Barbat Barbat, Horia Alejandro (CIMNE, 2015)
Text en actes de congrés
Accés obertThis paper presents the results of finite element simulations made on a bent pipe subjected to an in-plane variable cyclic displacement combined with internal pressure. The results of the numerical analyses will be compared ... -
Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures
Cornejo, Alejandro; Barbu, Lucia Gratiela; Escudero Torres, Cuauhtemoc; Martínez García, Javier; Oller Martínez, Sergio Horacio; Barbat Barbat, Horia Alejandro (2018-09)
Article
Accés obertThe main purpose of this paper is to develop a reliable method based on a three-dimensional (3D) finite-element (FE) model to simulate the constitutive behaviour of reinforced concrete structures strengthened with ... -
Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures: large scale non-linear analysis
Barbu, Lucia Gratiela; Cornejo Velázquez, Alejandro; Martínez García, Javier; Oller Martínez, Sergio Horacio; Barbat Barbat, Horia Alejandro (2019-05)
Article
Accés obertThe main purpose of this paper is to develop a reliable method based on a three-dimensional (3D) finite-element (FE) model to simulate the constitutive behaviour of reinforced concrete structures strengthened with ... -
Una Metodología para la simulación de mezclas asfálticas recicladas
González Lopez, Jose Manuel; Oller Martínez, Sergio Horacio; Miquel Canet, Juan; Miró Recasens, José Rodrigo (Universitat Politècnica de Catalunya. CIMNE, 2011)
Article
Accés obertEn el presente artículo se presenta una nueva metodología para la caracterización mecánica de mezclas asfálticas con particular interés en las mezclas recicladas, lo que se traduce en la definición de ensayos de laboratorio ... -
Micro-mechanical approach for the vibration analysis of CFRP laminates under impact-induced damage
Pérez Martínez, Marco Antonio; Oller Martínez, Sergio Horacio; Felippa, Carlos; Gil Espert, Lluís (Elsevier, 2015-12-15)
Article
Accés obertThis paper deals with modelling the effect of low-velocity impact damage upon the vibration response of CFRP laminates through a micro-mechanical description of the induced internal damage. The serial-parallel (SP) continuum ... -
Model-wise algorithm for the resolution of fatigue problems
Barbu, Lucia Gratiela; Oller Martínez, Sergio Horacio; Martínez García, Javier; Barbat Barbat, Horia Alejandro (CIMNE, 2015)
Text en actes de congrés
Accés obertThe present work presents a general constitutive model formulation and a numerical algorithm for automatically selecting the appropriate coupling of damage and plasticity as a function of the number of cycles the material ... -
Modelización numérica de la no-linealidad constitutiva de laminados compuestos
Rastellini, Fernando G.; Oller Martínez, Sergio Horacio; Oñate Ibáñez de Navarra, Eugenio (International Centre for Numerical Methods in Engineering (CIMNE), 2007)
Llibre
Accés obertEl objetivo principal del presente trabajo es el desarrollo, formulación e implementación computacional, de un modelo numérico para el tratamiento de la no linealidad constitutiva de laminados reforzados con fibras, en el ... -
Modelización numérica del comportamiento estructural cíclico de barras esbeltas de acero con pandeo restringido
Castro Medina, J.C.; López Almansa, Francisco; Oller Martínez, Sergio Horacio (Universitat Politècnica de Catalunya. CIMNE, 2014)
Article
Accés obertEste trabajo presenta un modelo numérico del comportamiento estructural cíclico de barras de pandeo restringido, comúnmente utilizadas como una alternativa a las clásicas barras de arriostramiento concéntrico para protección ... -
Modelización numérica del comportamiento estructural de barras de pandeo restringido
Castro Medina, J. C.; López Almansa, Francisco; Oller Martínez, Sergio Horacio (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2011)
Llibre
Accés obertLos disipadores de energía son elementos pasivos que se incorporan a edificios y a otras construcciones que, pueden estar sometidas a acciones dinámicas, especialmente movimientos sísmicos. Su finalidad es absorber la ... -
Modelling the elastic behaviour of carbon nanotube-reinforced composites
Otero-Gruer, Fermín; Oller Martínez, Sergio Horacio; Martínez García, Javier; Salomón, Ramón Omar (2011)
Text en actes de congrés
Accés restringit per política de l'editorialCarbon nanotubes (CNTs), since their discovery by Lij ima in 1991 [1], are considered a new generation of reinforcement [2]. Their "nano" size structure makes them potentially free of defects, which provides them with ... -
Modelling viscoelastic behaviour of carbón nanotube-reinforced thermo-plastics
Otero Gruer, Fermín Enrique; Oller Martínez, Sergio Horacio; Martínez García, Javier; Salomón, Ramón Omar (Asociación Argentina de Mecánica Computacional, 2012)
Text en actes de congrés
Accés obertCarbon nanotubes (CNTs), since their discovery by Lijima (S. Lijima, Nature, 354:56-58 (1991)), are considered a new generation of reinforcement. Their "nano" size structure makes them potentially free of defects, which ... -
Un modelo constitutivo de daño plástico para materiales friccionales. Parte II: Generalización para procesos con degradación de rigidez: ejemplos
Oliver Olivella, Xavier; Oller Martínez, Sergio Horacio; Lubliner, J.; Oñate Ibáñez de Navarra, Eugenio (Centro Internacional de Métodos Numéricos en Ingeniería, 1988-10)
Article
Accés obert -
Modelo de degradación diferenciada para materiales compuestos
Quinteros, Ricardo D.; Oller Martínez, Sergio Horacio; Nallim, Liz (Asociación Argentina de Mecánica Computacional, 2012)
Text en actes de congrés
Accés restringit per política de l'editorialEn este trabajo se presenta la formulación y validación de un modelo de degradación elástica diferenciado. El modelo propuesto permite degradar en forma diferenciada la parte volumétrica y desviadora del comportamiento ... -
Modelo numérico de elastómeros multi-fase y su aplicación al análisis de estructuras con aislamiento sísmico
Salomón, O; Oller Martínez, Sergio Horacio; Barbat Barbat, Horia Alejandro (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 1999-11)
Llibre
Accés obertTeniendo en cuenta las ventajas del aislamiento sísmico de base en comparación con el diseño convencional de estructuras sismorresistentes y considerando la escasa cantidad de modelos numéricos que permitan una simulación ...