Exploració per autor "Casellas Padró, Daniel"
Ara es mostren els items 1-20 de 50
-
A comparative study of the contact fatigue behavior and associated damage micromechanisms of TiN- and WC:H-coated cold-work tool steel
Ramírez Sandoval, Giselle; Jiménez Piqué, Emilio; Mestra Rodríguez, Álvaro Miguel; Vilaseca Vallvé, M. Mercedes; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel (2015-08-01)
Article
Accés obertIn this study the contact fatigue behavior of two coated tool steel is compared. They differ in the chemical nature of the coatings as well as on the deposition route used: a conventional TiN coating prepared by cathodic ... -
A damage-based uniaxial fatigue life prediction method for metallic materials
Parareda Oriol, Sergi; Casellas Padró, Daniel; Mares, Marc; Mateo García, Antonio Manuel (Elsevier, 2023-06-06)
Article
Accés obertDetermining the fatigue behaviour of metallic materials using standardised testing methods is costly and time-consuming. Therefore, several methods have been proposed to shorten the testing time and improve the fatigue ... -
A fracture mechanics approach to develop high crash resistant microstructures by press hardening
Casellas Padró, Daniel; Frómeta Gutiérrez, David; Lara, Antoni; Molas Busquets, Sílvia; Jonsén, Par (2017)
Text en actes de congrés
Accés obertCrashworthiness is a relevant engineering property for car parts. However it is not easy to measure at laboratory scale and complex impact tests have to be carried out to determine it. Crash re-sistance for high strength ... -
Analysis of fracture resistance of tool steels by means of acoustic emission
Martínez González, Eva; Picas Anfruns, Ingrid; Casellas Padró, Daniel; Romeu Garbí, Jordi (2010-12-10)
Article
Accés restringit per política de l'editorialThe automotive manufacturers currently use advanced high-strength steels (AHSS) to produce lightweight vehicles with increased safety performance. While showing excellent strengthto-weight ratios, AHSS have several limitations ... -
Analysis of fracture resistance of tool steels by means of acoustic emission.
Martínez González, Eva; Picas Anfruns, Ingrid; Casellas Padró, Daniel; Romeu Garbí, Jordi (2010)
Text en actes de congrés
Accés obertThe usage of advanced high strength steels (AHSS) in structural automotive components has been broadened in the past few years to satisfy the strict specifications of the automotive industry. Besides showing excellent ... -
Caracterización nanomecánica mediante la técnica de nanoindentación de partículas duras
Cuadrado, Núria; Casellas Padró, Daniel; Caro, J; Llanes Pitarch, Luis Miguel (2009)
Article
Accés obert -
Comportamiento a fractura de aceros metaestables
Mateo García, Antonio Manuel; Gutierrez, D.; Lara, A.; Zapata Dederle, Ana Cristina; Rodríguez Calvillo, Pablo; Fargas Ribas, Gemma; Calvo Muñoz, Jessica; Casellas Padró, Daniel (2012)
Article
Accés obert -
Comportamiento a fractura de aceros para trabajo en frío: Influencia de la microestructura
Goez, Alexey; Picas Anfruns, Ingrid; Torres Hernández, Yadir; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel (2009)
Article
Accés restringit per política de l'editorialLa implementación de los Aceros de Alta Resistencia (AHSS) en el diseño estructural del sector de la automoción permite reducciones importantes en el peso y consumo de combustible de los coches. Sin embargo, el conformado ... -
Determination of the essential work of fracture at high strain rates
Frómeta Gutiérrez, David; Casellas Padró, Daniel; Jonsén, Par (2017)
Text en actes de congrés
Accés obertDuring the last decades, the use of ultra-high strength steel (UHSS) has increased as its favorable ratio between strength and mass allows the design of lighter body-in-white while maintaining passenger safety. Modeling ... -
Efecto de la microesctructura en la anisotropía a fractura y fatiga de aceros de herramienta para trabajo en frío
Goez, Alexey; Picas Anfruns, Ingrid; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel (2010)
Text en actes de congrés
Accés restringit per política de l'editorial -
Efecto de la microestructura en la nucleación y propagación de fisuras en aceros de herramienta de trabajo en frío
Picas Anfruns, Ingrid; Cuadrado Lafoz, Nuria; Casellas Padró, Daniel; Goez, Alexey; Llanes Pitarch, Luis Miguel (2011)
Text en actes de congrés
Accés obert -
Efecto de la morfología de grietas generadas por nanoindentación y su efecto en el cálculo de la tenacidad de fractura
Cuadrado, Núria; Jiménez Piqué, Emilio; Casellas Padró, Daniel; Anglada Gomila, Marcos Juan (2011)
Text en actes de congrés
Accés obertEn el presente trabajo se ha utilizado la técnica de nanoindentación para inducir grietas en diferentes materiales cerámicos y estudiar la morfología de grieta generada por la aplicación de un indentador tipo Berkovich. ... -
Effect of carbides properties and microstructural characteristics on crack nucleation and propagation in cold forming tools
Casellas Padró, Daniel; Picas Anfruns, Ingrid; Castellà Rodil, Marc; Goez, Alexey; Llanes Pitarch, Luis Miguel; Casas Aguirregomezcorta, Begoña; Valls, I. (2009)
Text en actes de congrés
Accés restringit per política de l'editorial -
Effect of crystal anisotropy on the mechanical properties of WC embedded in WC-Co cemented carbides
Cuadrado, Núria; Casellas Padró, Daniel; Llanes Pitarch, Luis Miguel; Gonzalez, Iban; Caro, Jaume (2011)
Text en actes de congrés
Accés obert -
Effect of sandblasting on low and high-cycle fatigue behaviour after mechanical cutting of a twinning-induced plasticity steel
Lara, Antoni; Roca Puigvert, Mercè; Parareda, Sergi; Cuadrado Lafoz, Nuria; Calvo Muñoz, Jessica; Casellas Padró, Daniel (2018)
Text en actes de congrés
Accés obertIn the last years, car bodies are increasingly made with new advanced high-strength steels, for both lightweighting and safety purposes. Among these new steels, high-manganese or TWIP steels exhibit a promising combination ... -
Estudio de la resistencia a fatiga térmica en moldes de inyección de aluminio utilizando aceros de alta conductividad térmica
Molas, Sílvia; Hamasaiid, Anwar; Llobet, Albert; Valls, Isaac; Casellas Padró, Daniel; Riera Colom, María Dolores (2013)
Text en actes de congrés
Accés obertLa mayoría de los mecanismos de fallo que determinan la durabilidad de un molde de inyección de aluminio a alta presión están relacionados con las solicitaciones termo-mecánicas de la superficie. En cada ciclo, la ... -
Evaluación del comportamiento a desgaste en aceros de herramienta: simulación por ordenador y verificación experimental
Hernández Rossi, Ricardo; Cruz, Marlon; Casellas Padró, Daniel; Riera Colom, María Dolores; Prado Pozuelo, José Manuel (2007)
Article
Accés obertEn el sector automovilístico se ha incrementado el uso de aceros de alta y muy alta resistencia para conformar piezas de carrocería. La utilización de estos nuevos aceros lleva asociada una problemática específica en la ... -
Evaluation of essential work of fracture in a dual phase high strength steel sheet
Gutierrez, David; Pérez Caro, Lluís; Lara, Antoni; Casellas Padró, Daniel; Prado Pozuelo, José Manuel (2013-01)
Article
Accés obertLa tenacidad de fractura de aceros de alta resistencia (AHSS), es una propiedad interesante para optimizar el com- portamiento a impacto, pero su caracterización experimental en chapas metálicas es compleja debido a su ... -
Evaluation of fracture toughness of small volumes by means of cube-corner nanoindentation
Cuadrado Lafoz, Nuria; Casellas Padró, Daniel; Anglada Gomila, Marcos Juan; Jiménez Piqué, Emilio (2012-03)
Article
Accés obertIn this work, the applicability of the two most commonly used equations for calculating the fracture toughness by nanoindentation is discussed in terms of the indenter geometry and the indentation crack morphology. These ... -
Fatigue resistance evaluation of high Mn-TWIP steel through damage mechanics: A new method based on stiffness evolution
Parareda Oriol, Sergi; Casellas Padró, Daniel; Lara, Antoni; Mateo García, Antonio Manuel (2022-03-01)
Article
Accés obertThe work presented here deals with the implementation of a new methodology that allows fast and reliable determination of the fatigue strength. It is based on monitoring the specimen stiffness changes at different stress ...