Exploració per tema "Silicones"
Ara es mostren els items 1-20 de 26
-
Attachment of the Silver nanoplates on the SiO2 surface
(Universitat Politècnica de Catalunya / Tong ji da xue (Xina), 2010)
Projecte/Treball Final de Carrera
Accés obertA method to attach silver nanoplates on the silica surface has been developed. This is based on a conventional two steps seed mediated growth. The surface of SiO2 colloids, with a size around 220 nm has been modified with ... -
Boron diffused emitters passivated with Al2O3 films
(Institute of Electrical and Electronics Engineers (IEEE), 2013)
Text en actes de congrés
Accés restringit per política de l'editorialIn this work we study the fabrication and characterization of boron diffused emitters using FZ c-Si(n) substrates. Emitter surface was passivated with Al2O3(25 nm thick) layers deposited by thermal atomic layer deposition ... -
Cambios en las superficies de las lentes de contacto de hidrogel de silicona con el uso
(Universitat Politècnica de Catalunya, 2012-06-26)
Projecte Final de Màster Oficial
Accés obert -
Characterization and assessment of silicones for suitability for production of printing plates
(Universitat Politècnica de Catalunya, 2017-10-19)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autorA novel process to create holographic nanostructures, through the production of silicone nanostructured printing plates, was recently developed. In order to optimize the process, was required an understanding of material ... -
La cromatografía de exclusión: análisis de la distribución de pesos moleculares en siliconas por GPC
(Institut d'Investigació Tèxtil i Cooperació Industrial de Terrassa. Universitat Politècnica de Catalunya (UPC), 2009)
Article
Accés obertEn el presente trabajo se explican los fundamentos de la cromatografía de exclusión o permeación en gel (GPC) y se aplica dicha técnica a la determinación de la distribución pesos moleculares de 4 polímeros de aminodimetilsiloxano ... -
Crystalline Silicon kerf-less wafering for PV applications
(Universitat Politècnica de Catalunya, 2017-06-15)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitat -
Design and execution of a verification, validation, and uncertainty quantification plan for a numerical model of left ventricular flow after LVAD implantation
(Public Library of Science, 2022-06)
Article
Accés obertBACKGROUND: Left ventricular assist devices (LVADs) are implantable pumps that act as a life support therapy for patients with severe heart failure. Despite improving the survival rate, LVAD therapy can carry major ... -
Detección de siliconas en tejidos defectuosos mediante espectrofotometría de FTIR
(Institut d'Investigació Tèxtil i Cooperació Industrial de Terrassa. Universitat Politècnica de Catalunya (UPC), 2010)
Article
Accés obertEl análisis de siliconas tiene una especial dificultad, debido a la elevada estabilidad de estos compuestos, a su viscosidad y a su baja solubilidad en disolventes convencionales. En este trabajo se emplea la espectrofotometría ... -
Dynamics of fast pattern formation in porous silicon by laser interference
(2014-10-24)
Article
Accés obertPatterns are fabricated on 290 nm thick nanostructured porous silicon layers by phase-mask laser interference using single pulses of an excimer laser (193 nm, 20 ns pulse duration). The dynamics of pattern formation is ... -
Effect of the hydration on the biomechanical properties in a fibrin-agarose tissue-like model
(2014-08-01)
Article
Accés obertThe effect of hydration on the biomechanical properties of fibrin and fibrin-agarose (FA) tissue-like hydrogels is reported. Native hydrogels with approximately 99.5% of water content and hydrogels with water content reduced ... -
Effects of photon reabsorption phenomena in confocal micro-photoluminescence measurements in crystalline silicon
(American Institute of Physics (AIP), 2017-02-14)
Article
Accés obertConfocal micro-photoluminescence (PL) spectroscopy has become a powerful characterization technique for studying novel photovoltaic (PV) materials and structures at the micrometer level. In this work, we present a comprehensive ... -
Estudi de selecció i integració d’un robot en el post-procés de la línia SiOcast
(Universitat Politècnica de Catalunya, 2022-05-12)
Treball Final de Grau
Accés obert
Realitzat a/amb: SIOCASTSiOcast es una empresa que posee un sistema único de inyección de termoplástico en molde de silicona. Es un sistema revolucionario en el mundo de las miniaturas ya que es muy diferente y ventajoso sobre los otros sistemas ... -
Laser fabrication of porous silicon-based platforms for cell culturing
(2013-11)
Article
Accés restringit per política de l'editorial -
Macroporous silicon for high-capacitance devices using metal electrodes
(2014-09-05)
Article
Accés obertIn this paper, high-capacity energy storage devices based on macroporous silicon are demonstrated. Small footprint devices with large specific capacitances up to 100 nF/mm(2), and an absolute capacitance above 15 mu F, ... -
Micro- and nanotexturization of liquid silicone rubber surfaces by injection molding using hybrid polymer inlays
(Wiley (John Wiley & Sons), 2022-03-08)
Article
Accés obertMicro- and nanotexturization of surfaces can give to the parts different advanced functionalities, such as superhydrophobicity, self-cleaning, or antibacterial capabilities. These advanced properties in combination with ... -
Nanogeles para aplicaciones oculares
(Universitat Politècnica de Catalunya, 2022-07-18)
Projecte Final de Màster Oficial
Accés obertL’evolució en els materials de lents de contacte ha provocat que el número d’usuaris augmenti notablement. Tot i que les lents toves d’hidrogel de silicona han suposat un abans i un després per al confort, la hidratació i ... -
Prevención de la formación de biopelículas bacterianas sobre lentes de contacto hidrogel
(Universitat Politècnica de Catalunya, 2015-06-22)
Projecte Final de Màster Oficial
Accés obertEn este trabajo se han realizado recubrimientos estables con propiedades antibacterianas en lentes de contacto hidrogel de silicona mediante ultrasonidos y utilizando nanopartículas de zinc (ZnO), quitosano (CS) y ácido ... -
Procés de fabricació per obtenir un perfil de silicona a través d'extrusió vertical
(Universitat Politècnica de Catalunya, 2023-10-24)
Treball Final de Grau
Accés restringit per acord de confidencialitat
Realitzat a/amb: MerefsaL’enfocament d’aquest treball es centra en el procés de fabricació per obtenir un perfil de silicona mitjançant una línia d’extrusió vertical ascendent, en tot moment realitzant una comparació entre la línia d’extrusió ... -
Producte per a la superació sexual
(Universitat Politècnica de Catalunya, 2017-07)
Treball Final de Grau
Accés restringit per acord de confidencialitat -
“Silicon millefeuille” : From a silicon wafer to multiple thin crystalline films in a single step
(2013-04-29)
Article
Accés obertDuring the last years, many techniques have been developed to obtain thin crystalline films from commercial silicon ingots. Large market applications are foreseen in the photovoltaic field, where important cost reductions ...