Exploració per tema "Osseointegration"
Ara es mostren els items 1-20 de 37
-
All-in-one trifunctional strategy: A cell adhesive, bacteriostatic and bactericidal coating for titanium implants
(2018-09-01)
Article
Accés obertStrategies to inhibit initial bacterial adhesion are extremely important to prevent infection on biomaterial surfaces. However, the simultaneous attraction of desired eukaryotic cells remains a challenge for successful ... -
Análisis mecánico de la evolución de curación de diferentes tipos de fracturas y de la osteogénesis a distracción
(Sociedad Ibérica de Biomecánica y Biomateriales, 1998)
Article
Accés obert -
Avaluació dels Efectes del Tractament de Plasma de Baixa Temperatura sobre Ciments de Fosfat de Calci per a la millora de la Regeneració Òssia.
(Universitat Politècnica de Catalunya, 2013-02)
Projecte/Treball Final de Carrera
Accés obertEls ciments de fosfat de calci són materials molt utilitzats en aplicacions biomèdiques per a l’ompliment de cavitats òssies. Es troben constituı̈ts per una fase sòlida en forma de pols i un lı́quid, que al mesclar-se ... -
Biofunctionalization of titanium surfaces for osseintegration process improvement
(Institute Of Physics Publishing Ltd, 2010-06-01)
Article
Accés restringit per política de l'editorialThis study aims to improve the osseointegration of titanium implants through surface immobilization of peptides that induce a beneficial biological response. This was carried out biofunctionalizating titanium surfaces by ... -
Biofunctionalization of titanium surfaces with heparin-binding biomolecules to enhance osteointegration of implants
(Universitat Politècnica de Catalunya, 2015-06)
Projecte Final de Màster Oficial
Accés obertFor orthopaedic, dental or craniofacial applications osteointegration is critical for short-term initial stability and long-term success of the implant. Important efforts have been made in the past to optimize the ... -
Biomedical applications of powder metallurgy
(Elsevier, 2021-09-01)
Capítol de llibre
Accés restringit per política de l'editorialThe performance and properties of Titanium (Ti) and its alloys can be fully exploited for biomedical applications such as orthopedic and dental implants, when porous structures are used. Such Ti structures can matched the ... -
Biomimetic treatment on dental implants for short-term bone regeneration
(2014-01-01)
Article
Accés restringit per política de l'editorial
Realitzat a/amb: University of Minnesota School of DentistryObjectives The main purpose of this work was to assess the short-term bone regenerative potential of new osteoconductive implants. The novelty of the study lies in the analysis of the effectiveness of a novel two-step ... -
Calidad y cualidad del titanio para su uso en cirugía ortopédica
(Sociedad Ibérica de Biomecánica y Biomateriales, 1997)
Article
Accés obertPuesto que en los momentos actuales se está usando el titanio de manera habitual como componente de todas las endoprótesis, y de manera cada vez más importante se está incluyendo en la fabricación de los implantes de ... -
Caracterización fisicoquímica y biológica de un proceso de funcionalización del titanio para mejorar la osteointegración
(Universitat Politècnica de Catalunya, 2015-02)
Projecte/Treball Final de Carrera
Accés obertHoy en día, los implantes de titanio son a menudo utilizados en ortopedia y odontología. Aunque el titanio es un material biocompatible, su interacción con los tejidos biológicos circundantes puede verse afectada por ... -
Desarrollo y bioactivación de espumas metálicas de titanio de alta porosidad interconectada y mínima rigidez para aplicaciones biomédicas
(Universitat Politècnica de Catalunya, 2015-11)
Projecte/Treball Final de Carrera
Accés restringit per acord de confidencialitat -
Estudio comparativo del porcentaje de osteointegración entre implantes convencionales con distintas superficies e implantes experimentales
(SIIB, 2008-12-01)
Article
Accés obertSe realizó un estudio histomorfométrico comparativo del porcentaje de osteointegración (B.I.C.: bone implant contact) entre implantes dentales comerciales, con distintas superficies (titanio liso, plasma spray de titanio, ... -
Estudio experimental del relleno de cavidades óseas con hidroxiapatita asociada a colágeno
(Sociedad Ibérica de Biomecánica y Biomateriales, 1997-12)
Article
Accés obertLa cirugía ortopédica y maxilo-facial necesita realizar en muchas ocasiones resecciones masivas de tejido óseo. Esto ha hecho que se hayan propuesta la utilización de materiales inertes como sustitutos óseos, gracias a la ... -
Finite element analysis of narrow dental implants
(2020-07-08)
Article
Accés obertNarrow-diameter implants (NDIs) traditionally have been associated to higher rates of failure in comparison with regular-diameter implants (RDIs) and wide-diameter implants (WDIs), since they generate a more unfavorable ... -
Functionalization of 3D-printed titanium scaffolds with elastin-like recombinamers to improve cell colonization and osteoinduction
(2023-03-08)
Article
Accés obert
Realitzat a/amb: Universidad de Valladolid / Consejo Superior de Investigaciones Científicas / Institut de Bioenginyeria de CatalunyaThe 3D printing of titanium (Ti) offers countless possibilities for the development of personalized implants with suitable mechanical properties for different medical applications. However, the poor bioactivity of Ti is ... -
Functionalization of a Ti-based alloy with synthesized recombinant fibronectin fragments to improve cellular response
(Universitat Politècnica de Catalunya, 2014-07-22)
Tesi
Accés obertAccording to a study of the European Commission, approximately one million hips are replaced by prostheses worldwide every year. The interaction of the human body with foreign materials that are subjected to alternating ... -
Human primary osteoblast behaviour on microrough zirconia-toughened alumina and on selectively etched microrough zirconia-toughened alumina
(Elsevier, 2018-03-01)
Article
Accés restringit per política de l'editorialHip arthroplasty cementless acetabular components require excellent mechanical properties, biocompatibility, low friction and good osseointegration with surrounding bone tissue. Zirconia-toughened alumina (ZTA) fulfils ... -
Implant resonance and the mechanostat theory: Applications of therapeutic ultrasound for porous metallic scaffolds
(Elsevier, 2021-06-01)
Article
Accés obertThe development of treatment strategies for improving secondary stability at the bone-implant interface is a challenge. Porous implants are one solution for improving long-term implant stability, but the osteoconduction ... -
Incorporación del estroncio para mejorar la osteointegración de los implantes de titanio
(Universitat Politècnica de Catalunya, 2015-02)
Projecte/Treball Final de Carrera
Accés obertEl objetivo de este estudio es generar una nueva superficie de implante que contenga estroncio para la administración local de los iones de estroncio (Sr2+), que tienen el potencial de mejorar la osteointegración de los ... -
Influence of nanosecond laser surface patterning on dental 3Y-TZP: Effects on the topography, hydrothermal degradation and cell response
(2024-01-01)
Article
Accés obert
Realitzat a/amb: Institut de Bioenginyeria de CatalunyaObjectives Laser surface micropatterning of dental-grade zirconia (3Y-TZP) was explored with the objective of providing defined linear patterns capable of guiding bone-cell response. Methods A nanosecond (ns-) laser ... -
Influence of the elastic modulus on the osseointegration of dental implants
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-01-01)
Article
Accés obert
Realitzat a/amb: Universidad de Oviedo / Universidad de Sevilla / Universitat Internacional de CatalunyaThe load transfer from metallic prosthesis to tissue plays an important role in the success of a designed device. From a mechanical behavior point of view, the load transfer will be favored when the elastic modulus between ...