Exploració per tema "Casting"
Ara es mostren els items 1-11 de 11
-
A phenomenological model for the solidification of eutectic and hypoeutectic alloys including recalescence and undercooling
(2018-05)
Article
Accés obertIn this work, a novel phenomenological model is proposed to study the liquid-to-solid phase change of eutectic and hypoeutectic alloy compositions. The objective is to enhance the prediction capabilities of the solidification ... -
Automatization and instrumentalization of a semisolid casting system
(Universitat Politècnica de Catalunya, 2019-06-06)
Treball Final de Grau
Accés restringit per decisió de l'autorEven though new systems like 3D printing start to get more viable, casting remains an important manufacturing technology. During a casting process, some segments at different spots of the material at the microscopic level ... -
Casting Fe-Al-based intermetallics microalloyed with Li and Ag
(2016-08-29)
Article
Accés obertThe effect on the mechanical properties at room temperature of Li and Ag additions to the Fe–Al (40 at.%)-based alloy produced by conventional casting were evaluated in this work. Alloying elements were added into a ... -
Comparative study of processing methods for starch/gelatin films
(2013-06)
Article
Accés restringit per política de l'editorialIn this work, the influence of processing methods on the properties of starch/gelatin films plasticizedwith glycerol and sorbitol is reported. Four different processing techniques: casting; pressing; pressingfollowed by ... -
Corrosion resistance and ion release of dental prosthesis of COCR obtained by CAD-CAM milling, casting and laser sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-06-01)
Article
Accés obert
Realitzat a/amb: Barcelona Dental Institute / Universitat Internacional de Catalunya / Porto Dental InstituteCorrosion resistance and ion release behavior have been evaluated for thirty dental restoration samples obtained by three different manufacturing systems: computer-aided design and manufacturing (CAD-CAM), traditional ... -
Efecte d'elements microaliants en les propietats mecàniques dels aliatges d'alumini per a foneria
(Universitat Politècnica de Catalunya, 2020-02-05)
Treball Final de Grau
Accés restringit per decisió de l'autor[CATALÀ] L’objectiu d’aquest treball és fer un estudi dels efectes de diferents additius a un aliatge d’alumini AlSi9Cu3. Els elements d’addició són el Zn, Cr, Mg i TiB, afegits en molt petites quantitats (microaliats). ... -
Efecte dels elements microaliants i dels tractaments tèrmics en les propietats mecàniques de l'aliatge AlSi9Cu3
(Universitat Politècnica de Catalunya, 2020-10-29)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: CIE Automotive. Componentes Vilanova / Aleastur / StlanEl principal objectiu d’aquest treball és fer un estudi dels efectes de diferents additius a un aliatge d’alumini AlSi9Cu3. Els elements d'addició seran Cr, Zr, Mg, Zn i Ti-B, introduïts en petits quantitats. D’altra banda, ... -
Efecto de los elementos microaleantes en las aleaciones de aluminio para fundición
(Universitat Politècnica de Catalunya, 2019-06)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Bostlan / Aleastur / CIE Automotive. Componentes Vilanova[CASTELLÀ] El objetivo principal de este trabajo es realizar un estudio de los diferentes elementos de aleación añadidos al AlSi9Cu3, proporcionado por CIE Componentes VIlanova, también denominado EN AC 46500. Estos elementos ... -
Mechanical properties of CoCr dental-prosthesis restorations made by three manufacturing processes. Influence of the microstructure and topography
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-06-14)
Article
Accés obert
Realitzat a/amb: Barcelona Dental Institute / Universidad de Oviedo / Universitat Internacional de CatalunyaThe aim of this study is to compare the mechanical properties of three different dental restorations’ manufacturing processes (CADCAM milling, casting and laser sintering) generated by only one laboratory scanner focusing ... -
Optimización de los procesos de producción de una caja de dirección de inyección de aluminio
(Universitat Politècnica de Catalunya, 2018-10-31)
Treball Final de Grau
Accés obert
Realitzat a/amb: CIE Automotive. Componentes Vilanova[CASTELLÀ] Este proyecto se basa en la mejora de procesos de producción de piezas de inyección de aluminio, en concreto, de una caja de dirección. Dichas piezas son fabricadas íntegramente en la empresa colaboradora de ... -
Synergetic effects of Cr, Zr, Mg and Zn microalloying on microstructure and mechanical behavior of AlSi9Cu3 alloy
(2020)
Comunicació de congrés
Accés restringit per política de l'editorialThe effect of the alloy elements on the microstructure and the mechanical properties of an AlSi9Cu3 (Fe) secondary alloy is analysed. The additives involved include Zn, Mg, Cr, Zr and TiB, which were added in small amounts. ...