Exploració per títol
Ara es mostren els items 58635-58654 de 245837
-
Design of a MATLAB HEC-RAS interface to test advanced control strategies on water systems
(2021-03-11)
Article
Accés obertThe software package HEC-RAS (Hydrologic Engineering Center’s River Analysis System) is widely used by the water engineering community to analyze hydraulic systems and perform development planning. Furthermore, it integrates ... -
Design of a Measurement System to determine Cooling Effectiveness on a rotating Turbine rig using Pressure Sensitive Paint
(Universitat Politècnica de Catalunya / Technishe Universität Darmstadt, 2013)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Technische Universität DarmstadtFilm cooling is widely used to protect gas turbine blades and vanes from the extremelly hot gases leaving the combustion chamber. Over the past decades, film cooling on blades, vanes and end-wall has been widely studied. ... -
Design of a metal multiframe structure building
(Universitat Politècnica de Catalunya / Ceské Vysoké Ucení Technické v Praze (Czech Technical University in Prague), 2010)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorCalculation of loads on the building and caused by cranes on runway beams. Design of steel structure of the building including supporting beams of cranes. Design selected connections. Drawings os steel structure. -
Design of a microclimate for improving thermal quality
(Universitat Politècnica de Catalunya, 2012)
Projecte/Treball Final de Carrera
Accés obertThe idea of benefiting from a glasshouse to create a local microclimate between two buildings is not new, around 1985 such a multi-occupancy block was built in Hagsätra, in the south of Stockholm. Four buildings were ... -
Design of a microfluidic channel for the purpose of VOCs discrimination
(2023-05-17)
Comunicació de congrés
Accés obert -
Design of a midi controller and representation of spectral analysis
(Universitat Politècnica de Catalunya, 2020-06-30)
Treball Final de Grau
Accés obertEn aquest projecte s’han dissenyat i implementat dos dispositius separats. El primer correspon a un controlador MIDI, que permet el control d’elements virtuals d’un programari de creació musical. El segon correspon a una ... -
Design of a minimized cyclic tetrapeptide that neutralizes bacterial endotoxins
(2006)
Article
Accés restringit per política de l'editorialSeptic shock is a leading cause of mortality in intensive care patients, and no specific drugs are as yet available for its treatment. Therefore, new leads ar e required in order to increase the numbe r of active ... -
Design of a modular drumstick display unit for music shops based on Human Centered Design techniques
(Universitat Politècnica de Catalunya, 2017-05)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Zhejiang da xueThe main aim of this project is to apply Human Centered Design techniques onto the development of a product, in this case a drumsticks display for music stores or music expositions, in order to create a product that can ... -
Design of a Modular Exponentiation Module for an RSA Cryptographic Coprocessor with Power Analysis Countermeasures
(Universitat Politècnica de Catalunya, 2018-06-21)
Treball Final de Grau
Accés obertRivest-Shamir-Adleman (RSA) is a widely used public key cryptographic method. The main operation performed in this method, for encryption and decryption, is modular exponentiation. The way modular exponentiation is computed ... -
Design of a modular facility for sustainable indoor farming in Greenland
(Universitat Politècnica de Catalunya, 2023-07-17)
Projecte Final de Màster Oficial
Accés obertThis thesis explores the design of a modular facility for sustainable indoor farming in Greenland, to address the challenge of food insecurity due to the harsh climate conditions in this Arctic Island. The proposed facility ... -
Design of a modular instrument with reconfigurable Input/Output for test and measurement
(Universitat Politècnica de Catalunya, 2018-02)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitatThe purpose of this Master Thesis is the study of the capabilities offered by the National Instruments sbRIO-9651 System-On-Module, to determine if it?s suitable for the implementation of automatic test equipment instruments. ... -
Design of a modular multilevel converter
(Universitat Politècnica de Catalunya, 2013-06)
Treball Final de Grau
Accés restringit per decisió de l'autorMultilevel converters are power electronics topologies that can generate two or more voltage levels in each output phase. As a result, the voltage and current waveforms generated have lower total harmonic distortion. There ... -
Design of a monitoring device for closed protocol fire protection systems
(Universitat Politècnica de Catalunya, 2020-11-25)
Treball Final de Grau
Accés restringit per acord de confidencialitat -
Design of a monitoring system for distributed data processing pipelines : ECiDA platform monitoring
(Universitat Politècnica de Catalunya, 2023-10-03)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autor
Realitzat a/amb: Rijksuniversiteit GroningenDistributed data processing pipelines allow businesses to reduce the time needed to get models in production, fostering accelerated innovation and breakthroughs in many fields. Monitoring is crucial for ensuring the health ... -
Design of a mooring system for a Wave Energy Converter
(Universitat Politècnica de Catalunya / Politecnico di Torino, 2014)
Treball Final de Grau
Accés obertIn the current scenario of exhaustion of fossil fuels, new forms of alternative energy must gain ground. Taking advantage of the great amount of water, the element that gives name to our planet (blue planet); this thesis ... -
Design of a morphing airfoil to be used in cars
(Universitat Politècnica de Catalunya, 2020-07)
Treball Final de Grau
Accés restringit per acord de confidencialitat -
Design of a motorcycle mount with integrated roll-and-pitch-torque measurement on a motorcycle simulator
(Universitat Politècnica de Catalunya, 2019-06-05)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Technische Universität DarmstadtOn the new motorcycle simulator developed by the Institute of Automotive Engineering (FZD) of the Technische Universität Darmstadt, a measuring system should be incorporated with the aim of deter-mining the forces generated ... -
Design of a mould for the preparation of curved plates of composites reinforced with aramid nonwoven fabrics
(Universitat Politècnica de Catalunya, 2020-06-18)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Odisee VZWL’objectiu d’aquest article és investigar el millor disseny de motlle per produir plaques corbades de compòsit de ciment reforçat amb aramida. Després d’estudiar el comportament i els límits del material, s’estudien i es ... -
Design of a multi-level memory cell with new emerging non-volatile memristive technology
(Universitat Politècnica de Catalunya, 2017-01)
Treball Final de Grau
Accés obertThis thesis based on theoretical work from Vourkas et al. demonstrates experimentally that ternary memory cells are achievable. It does so using Knowm.org commercially available memristors and combining several of them in ... -
Design of a Multi-Module and Fully Integrated Switched-Capacitor DC-DC Power Converter
(Universitat Politècnica de Catalunya, 2015-02)
Treball Final de Grau
Accés obert[ANGLÈS] DC-DC converters are one of the main components of a power management unit and, concretely, the Switched-Capacitor DC-DC Power Converters (SCPC) are recently used due to their high efficiency and the possibility ...