Exploració per tema "Safety"
Ara es mostren els items 45-64 de 104
-
ICT-based solution as a support tool for foreigners in an emergency
(Universitat Politècnica de Catalunya, 2015-05-27)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Høgskolen i OsloThe aim of this report is to present the proposition of the ICT based tools to overcome the problem of language barrier in an emergency situation -
Impact of parameter variations on circuits and microarchitecture
(2006-12)
Article
Accés obertParameter variations, which are increasing along with advances in process technologies, affect both timing and power. Variability must be considered at both the circuit and microarchitectural design levels to keep pace ... -
Improve Sofa Assembly through Automation and Redesign of the Processes
(Universitat Politècnica de Catalunya, 2010)
Projecte/Treball Final de Carrera
Accés obert
Realitzat a/amb: Lunds universitetEnglish: To redesign the current assembly process of the Ektorp Sofa from IKEA in order to improve cycle times, quality levels and to reduce, if possible, costs associated with manufacturing, production times and materials. ... -
Increasing the Reliability of Software Timing Analysis for Cache-Based Processors
(IEEE, 2019-06-01)
Article
Accés obertReal-time systems are witnessing a significant increase in critical software's size, complexity, and performance needs, which can only be satisfied with high-performance hardware features. Cache memories, pervasively used ... -
Ingeniería de Mantenimiento: Mejora de la accesibilidad a una tolva de una mezcladora de polvo con material de base bauxita
(Universitat Politècnica de Catalunya, 2021-07-05)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Refratechnik IbéricaEn aquest projecte es presenta l'estudi i desenvolupament de l'accés a una tremuja d'una mescladora. Es pretén buscar la millor solució perquè els mecànics de manteniment puguin treballar còmodament, eliminant així tots ... -
ITER safety studies: the effect of two simultaneous perturbations during a loss of plasma control transient
(2014-10-01)
Article
Accés restringit per política de l'editorialThe loss of plasma control events in ITER are safety cases investigated to give an upper bound of the worse effects foreseeable from a total failure of the plasma control function. Conservative analyses based on simple OD ... -
La pérdida de seguridad en las líneas de remolque por problemas de fatiga en los trenzados de fibras sintéticas: trabajo de divulgación
(Instituto de Investigación Textil y Cooperación Industrial, 2006-01)
Article
Accés obertEn las operaciones de remolque de buques existen situaciones críticas debido a que el control del movimiento del buque pasa por la integridad de la línea de remolque. En los puertos del Mediterráneo la composición de la ... -
Legislación de seguridad para minas y cuevas turísticas de la Unión Europea
(2012)
Comunicació de congrés
Accés obertEn este trabajo se presentan los principales resultados del estudio de normativa de seguridad para minas y cuevas turísticas de la Unión Europea (UE). Del conjunto de países donde existen minas y cuevas turísticas se han ... -
Low-cost sensors technologies for monitoring sustainability and safety issues in mining activities: advances, gaps, and future directions in the digitalization for smart mining
(Multidisciplinary Digital Publishing Institute (MDPI), 2023-08)
Article
Accés obertNowadays, monitoring aspects related to sustainability and safety in mining activities worldwide are a priority, to mitigate socio-environmental impacts, promote efficient use of water, reduce carbon footprint, use renewable ... -
Methodology for the improvement of the AINA code wall-model applied to DEMO WCPB blanket
(2017-11)
Article
Accés obertThe present work describes and supports the methodology for the improvement of the wall model devel-oped in AINA and its specific application to the Japanese DEMO Water Cooled Pebbled Bed. The set-upand application of this ... -
Micromobility safety applications using AI
(Universitat Politècnica de Catalunya, 2020-06-28)
Treball Final de Grau
Accés obertPopulation massification in large cities has recently encouraged the use of micro vehicles, which simplifies and speeds up the mobility of their users. The aim of this thesis is to improve the safety of these vehicles ... -
Microscopic modeling of connected autonomous vehicles platooning: stability and safety analysis
(Elsevier, 2023-11-22)
Article
Accés obertWith recent advancements in the research and application of robotics, sensory devices, and Intelligent Transport Systems, autonomous vehicles are expected to become an integral part of the future transportation system. ... -
Modelación numérica de deslizamientos de ladera en embalses mediante el Método de Partículas y Elementos Finitos (PFEM)
(2012-04)
Article
Accés obertThe paper presents the results of the application of the Particle Finite Element Method (PFEM) to the analysis of landslides in reservoirs. This is a complex phenomenon, because of the interaction between the landslide, ... -
Modeling injury rates as a function of industrialized versus on-site construction techniques
(2014-05)
Article
Accés restringit per política de l'editorialIt is often predicted that the industrialization of building activities will lead to a reduction of accident rates in the construction sector, particularly as a result of switching activities from building sites to factories. ... -
Modelling the confidence of timing analysis for time randomised caches
(Institute of Electrical and Electronics Engineers (IEEE), 2016)
Text en actes de congrés
Accés obertTiming is a key non-functional property in embedded real-Time systems (ERTS). ERTS increasingly require higher levels of performance that can only be sensibly provided by deploying high-performance hardware, which however ... -
Monte carlo simulation as a tool to show the influence of the human factor into the quantitative risk assessment
(2016-07)
Article
Accés obertThe frequency of occurrence of an accident is a key aspect in the risk assessment field. Vari- ables such as the human factor (HF), which is a major cause of undesired events in process industries, are usually not considered ... -
Occupational risk index for assessment of risk in construction work by activity
(2014-01)
Article
Accés obertThe concern for occupational health and safety in construction work is reflected in the many preventive measures taken. However, examples of the systematic assessment of project alternatives aimed at minimizing occupational ... -
On Neural Networks Redundancy and Diversity for Their Use in Safety-Critical Systems
(Institute of Electrical and Electronics Engineers (IEEE), 2023-05)
Article
Accés obertAn increasing number of critical functionalities integrated in embedded critical systems rely on deep learning (DL) technology. This article summarizes certain key aspects of DL’s intrinsic stochastic and training-data-dependent ... -
On the assessment of probabilistic WCET estimates reliability for arbitrary programs
(2017-04-11)
Article
Accés obertMeasurement-Based Probabilistic Timing Analysis (MBPTA) has been shown to be an industrially viable method to estimate the Worst-Case Execution Time (WCET) of real-time programs running on processors including several ... -
On the safe deployment of matrix multiplication in massively parallel safety-related systems
(2022-04-08)
Article
Accés obertDeep learning technology has enabled the development of increasingly complex safety-related autonomous systems using high-performance computers, such as graphics processing units (GPUs), which provide the required high ...